abstract in dissertation

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 19 August 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Generate accurate APA citations for free

• Knowledge Base
• APA Style 7th edition
• How to write and format an APA abstract

APA Abstract (2020) | Formatting, Length, and Keywords

Published on November 6, 2020 by Raimo Streefkerk . Revised on January 17, 2024.

An APA abstract is a comprehensive summary of your paper in which you briefly address the research problem , hypotheses , methods , results , and implications of your research. It’s placed on a separate page right after the title page and is usually no longer than 250 words.

Most professional papers that are submitted for publication require an abstract. Student papers typically don’t need an abstract, unless instructed otherwise.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

How to format the abstract, how to write an apa abstract, which keywords to use, frequently asked questions, apa abstract example.

Formatting instructions

Follow these five steps to format your abstract in APA Style:

• Insert a running head (for a professional paper—not needed for a student paper) and page number.
• Set page margins to 1 inch (2.54 cm).
• Write “Abstract” (bold and centered) at the top of the page.
• Do not indent the first line.
• Double-space the text.
• Use a legible font like Times New Roman (12 pt.).
• Limit the length to 250 words.
• Indent the first line 0.5 inches.
• Write the label “Keywords:” (italicized).
• Write keywords in lowercase letters.
• Separate keywords with commas.
• Do not use a period after the keywords.

Scribbr Citation Checker New

The AI-powered Citation Checker helps you avoid common mistakes such as:

• Missing commas and periods
• Incorrect usage of “et al.”
• Ampersands (&) in narrative citations
• Missing reference entries

The abstract is a self-contained piece of text that informs the reader what your research is about. It’s best to write the abstract after you’re finished with the rest of your paper.

The questions below may help structure your abstract. Try answering them in one to three sentences each.

• What is the problem? Outline the objective, research questions , and/or hypotheses .
• What has been done? Explain your research methods .
• What did you discover? Summarize the key findings and conclusions .
• What do the findings mean? Summarize the discussion and recommendations .

Check out our guide on how to write an abstract for more guidance and an annotated example.

Guide: writing an abstract

At the end of the abstract, you may include a few keywords that will be used for indexing if your paper is published on a database. Listing your keywords will help other researchers find your work.

Choosing relevant keywords is essential. Try to identify keywords that address your topic, method, or population. APA recommends including three to five keywords.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An APA abstract is around 150–250 words long. However, always check your target journal’s guidelines and don’t exceed the specified word count.

In an APA Style paper , the abstract is placed on a separate page after the title page (page 2).

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Streefkerk, R. (2024, January 17). APA Abstract (2020) | Formatting, Length, and Keywords. Scribbr. Retrieved August 19, 2024, from https://www.scribbr.com/apa-style/apa-abstract/

Is this article helpful?

Raimo Streefkerk

Other students also liked, apa headings and subheadings, apa running head, apa title page (7th edition) | template for students & professionals, scribbr apa citation checker.

An innovative new tool that checks your APA citations with AI software. Say goodbye to inaccurate citations!

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• How to Write an Abstract for a Dissertation

Written by Hannah Slack

Every PhD student will have to write an abstract. Whether it’s for a conference paper , journal article or your thesis , the abstract is an important part for many academic activities. Although only a single short paragraph, writing one effectively takes practice.

This page will take you through what a dissertation abstract is, why it’s so important and how to write one.

On this page

What is an academic abstract.

An academic abstract is a short and concise summary of research . It should cover the aim or research question of your work, your methodology, results and the wider implications of your conclusions. All this needs to be covered in around 200-300 words .

One of the common mistakes people make when writing abstracts is not understanding their purpose. An abstract is not for the author, it’s for the reader . To summarise your research, as the person who knows it best, may seem easy. But to be able to communicate the complexities and importance of your work to someone else, likely outside of your field, can be difficult.

When will I need to write an academic abstract?

There are many different places that you’ll find abstracts. Some of the most common ones include:

• Grant and funding applications
• Journal articles
• Conference applications
• Conference proceedings

This guide primarily focuses on the dissertation abstract, which is the most common form of this kind of text.

What’s the difference between an abstract and an introduction?

The main differences between a PhD dissertation abstract and an introduction are the purpose and the length. An abstract is a short, paragraph-sized summary of the whole thesis, covering context, your research and results. Whereas an introduction should be much longer and only cover the context of your work. An introduction is designed to explain the background of your work and so will take up at least an entire page.

Why are abstracts important?

Abstracts are important because they are a quick and easy way to communicate your work. In many ways, academic abstracts are a promotional tool and so should be considered carefully.

For your thesis, it’s the first thing your examiners will read, forming their expectations for the rest of the dissertation.

In journal articles, their purpose is to convince the reader that they should read your article. If you’re applying for a conference, the abstract gives the organiser a taster of your paper so they can decide whether it’s suitable.

Effectively, your abstract is the first impression someone gets of your research and so it’s important to put your best foot forward.

How to write a PhD abstract

How you write a dissertation abstract will largely depend on what it’s for. For a PhD dissertation or journal article, you should have already written up the research which the abstract will summarise. You should focus on making sure your summary is an honest representation of the larger written work. However, for a conference application it’s likely you won’t yet have written the paper. In this instance, the abstract might focus more on the broader themes you intend to comment on and your methodology.

Whatever the intended purpose, all abstracts should broadly follow the same structure. To help you, we’ve put together a template to make sure you include all the important points.

PhD abstract format

Because a lot of information needs to be packed into a short paragraph, an abstract is easier to write when you break it down into the key elements. For a first draft, spend a few minutes on each of the six steps, only writing down one or two sentences.

• Rationale – Ask yourself why you are researching the topic and what is the context for your work. Here you should communicate the purpose of your study within the wider field.
• Research question – Now you should specify what the exact goal of this piece of research is. What question are you providing the answer for?
• Evidence and methods – After discussing the broader purpose of your work you now need to let the reader know what you have actually done. Try to summarise your methods and evidence with a few keywords to keep if brief. Some examples include qualitative, quantitative, archival or experimental.
• Results – Here, you should summarise your outcomes and highlight what is new or significant about your findings.
• Conclusion – The conclusion should relate back to your rationale and research question. Ask yourself, ‘what do the results mean?’
• Implications and applications – Lastly, the reader needs to know why your results are important to the field. You need to specify what is significant about this work and how it can be useful.

Once you have your framework it can be edited for a more natural flow. You may find that some points naturally merge into one sentence and others need some elaboration. But remember, the abstract must be short and concise so don’t be tempted to extend areas unnecessarily. Once you have a draft that you are happy with, consider asking for feedback from other PhD students or your supervisor.

Doing a PhD

For more information on trhe different stages of a doctorate, check out our guide to the PhD journey .

Ready to do a PhD?

Search our project listings to find out what you could be studying.

Want More Updates & Advice?

What happens during a typical PhD, and when? We've summarised the main milestones of a doctoral research journey.

The PhD thesis is the most important part of a doctoral degree. This page will introduce you to what you need to know about the PhD dissertation.

This page will give you an idea of what to expect from your routine as a PhD student, explaining how your daily life will look at you progress through a doctoral degree.

PhD fees can vary based on subject, university and location. Use our guide to find out the PhD fees in the UK and other destinations, as well as doctoral living costs.

Our guide tells you everything about the application process for studying a PhD in the USA.

Postgraduate students in the UK are not eligible for the same funding as undergraduates or the free-hours entitlement for workers. So, what childcare support are postgraduate students eligible for?

FindAPhD. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about PhD study?

Select your nearest city

You haven’t completed your profile yet. To get the most out of FindAPhD, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• The latest PhD projects delivered straight to your inbox
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, research proposal tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAPhD.com

or begin browsing FindAPhD.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAPhD account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest PhD news
• Hear about our upcoming study fairs
• Save your favourite projects, track enquiries and get personalised subject updates

Create your account

Looking to list your PhD opportunities? Log in here .

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

• How It Works
• PhD thesis writing
• Master thesis writing
• Bachelor thesis writing
• Dissertation writing service
• Dissertation abstract writing
• Thesis proposal writing
• Thesis editing service
• Thesis proofreading service
• Thesis formatting service
• Coursework writing service
• Research paper writing service
• Architecture thesis writing
• Computer science thesis writing
• Engineering thesis writing
• History thesis writing
• MBA thesis writing
• Nursing dissertation writing
• Psychology dissertation writing
• Sociology thesis writing
• Statistics dissertation writing
• Buy dissertation online
• Write my dissertation
• Cheap thesis
• Cheap dissertation
• Custom dissertation
• Dissertation help
• Pay for thesis
• Pay for dissertation
• Senior thesis
• Write my thesis

How to Craft a Killer Dissertation Abstract 2023

Learn how you can write a top-rated dissertation abstract thick and fast, with our professional guide.

Special tip – maintain a hawk-eye to the end.

What is an Abstract in a Dissertation?

A dissertation abstract is a summary of the entire thesis. It gives the significant proponents of your paper in a highly condensed form.

An abstract in a dissertation serves the following functions:

• Acts as an introduction to your dissertation article
• Sets the stage for the thesis
• Can substitute the whole thesis

The elements of an abstract include:

• Research problem and objectives
• Major results
• The conclusion

It is an essential component of the thesis that can either earn you a top grade or be the reason for your academic downfall.

How to Write a Dissertation Abstract

It is essential to determine the type of abstract for your dissertation. In writing a dissertation abstract, take note of the following types:

• Descriptive Abstract

It gives the kind of information found in your paper. A descriptive outline is usually concise and can be about 100 words or less.

• Critical Abstract

It describes the main findings and, additionally, a comment on the validity, completeness, or reliability of the study. Due to its interpretive nature, it generally contains 400-500 words in length.

• Informative Abstract

As the name suggests, this type presents and explains the main arguments, essential results, and evidence in the thesis. Although the length varies, it is not more than 300 words in length.

• Highlight Abstract

It serves to attract the reader’s attention to the paper. It uses leading remarks to spark the interest of the audience.

We are now going to see how to write an abstract for a dissertation in ten significant steps:

Ten Top-Notch Steps to Writing an Abstract for a Dissertation

Step 1: Define the purpose of your research

Start by making plain the purpose of your study. State the research question you are going to handle or the practical problem of your paper.

Do not delve into much detailed information here. For starters, you can have a brief context on the social or academic relevance of your topic.

Write the objectives of your research after stating the problem. When indicating the goals, use verbs such as:

To test To investigate, To evaluate To analyze

Use either the present or simple past tense for this section. Do not use the future tense in any case since the research is complete already.

Dissertation abstract example for this section:

Correct: This study evaluates the relationship between COVID-19 and flu. Incorrect: This study will determine the relationship between COVID-19 and influenza.

Step 2: Identify the methods you are going to use for your research

Now in this stage, clearly make mention of the ways you are going to use to answer your research question.

Write it in one to two sentences without making it too long. Ensure that the points are precise and to the end.

It should be in the simple past tense. Why? Because you have already done your research and completed it using these methods.

Do not go into the strengths and weaknesses of the research methods. The reader should be able to read through it fast and still understand the strategy and methodology of your thesis.

Correct: Direct observation was conducted on 40 COVID-19 patients. Correct: Questionnaires were administered to 20 doctors dealing with COVID-19 patients. Incorrect: Laboratory experiments will be done with ten specimens.

Step 3: Make a summary of the results

After collecting data, it is time to give brief but elaborate results in the abstract for the dissertation.

The results section depends on the length and complexity of the research. However, ensure that it doesn’t make the abstract longer than is recommended.

Do not include irrelevant results which may not add any value to your paper. Strive to point out the essential outcomes of the article which support or answer your research question.

Write the results in either the present or simple past tense.

Correct: Our findings show a substantial similarity in the symptoms of both COVID-19 and flu. Correct: Our analysis showed a significant similarity between the symptoms of both COVID-19 and flu. Incorrect: Our study has shown a considerable similarity in the symptoms of both COVID-19 and flu. Incorrect: Our findings will be showing a substantial similarity in the symptoms of both COVID-19 and flu.

Step 4: Finish off with the conclusions from your research

Your abstract should have an answer to the research question, which is in this part. Your reader should get the main point of your thesis at this point. What has your research found or proved? The conclusion should be able to tell this to the reader.

Improve the credibility of your dissertation by adding any relevant limitations in this section of the abstract. From the thesis abstract examples, we are going to see below; it is evident that the conclusion is as brief as possible.

You can also have recommendations or suggestions for further research in your conclusion. Nevertheless, they should be as brief as possible. Do not write a long list that will interfere with the length of the abstract.

Write the conclusion in the present simple tense. Here are examples for your inspiration:

Correct: We conclude that flu is a primary symptom of COVID-19. Incorrect: We found that influenza is a primary symptom of COVID-19.

Bonus Tips for Writing a Dissertation Abstract

Now that we have looked at the essential steps to follow, here are some expert tips to crank up your abstract:

Follow the recommended formatting requirements for the abstract. The format will include; word limit, length, and spacing, style (APA, MLA, etc.)

The standard formatting requires that you do not write more than one double-spaced page.

• Avoid verbosity

Each word in a sentence counts due to the brevity of an abstract. Therefore, use short but communicating sentences.

Do not add unnecessary words or jargon, as this will obscure your abstract. Remember that the reader should be able to understand your abstract in the shortest time possible.

Ensure that you maintain the proper balance between the different elements of the abstract.

Checklist for Writing an Abstract

• The type of abstract identified
• The conformity of the abstract to the conventions of the type chosen
• Is the problem interesting to write on
• What is your approach? (Prototype models, analytical models, etc.)
• What’s the answer (results)
• What is the implication of your solution? (Conclusion)

Writing a successful abstract requires both hard work and determination, but its fruits are worth the struggle. As you plan to write yours, ensure that all the elements discussed above appear in your paper.

For expert writing help , we have professional dissertation writers to get you started. What are you waiting for now?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment * Error message

Name * Error message

Email * Error message

Save my name, email, and website in this browser for the next time I comment.

As Putin continues killing civilians, bombing kindergartens, and threatening WWIII, Ukraine fights for the world's peaceful future.

Ukraine Live Updates

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

• Cookies & Privacy
• GETTING STARTED
• Introduction
• FUNDAMENTALS
• Acknowledgements
• Research questions & hypotheses
• Concepts, constructs & variables
• Research limitations
• Getting started
• Sampling Strategy
• Research Quality
• Research Ethics
• Data Analysis

Dissertation abstract

Despite being just 150 to 350 words long (in most cases), the Abstract is arguably one of the most important parts of your dissertation. In this short space, the abstract must capture the essence of your dissertation. This includes the problem being tackled (and the motivation behind this), the significance of your research, the research strategy guiding it, as well as the major findings and conclusions. The perfect informative abstract is one where the reader could choose not to read on but would still understand the essence of your dissertation. At the same time, a poorly constructed dissertation abstract can mislead the reader into thinking the study is about something it is not, confusing them from the very start.

In most cases, you will be expected to use an informative , rather than descriptive style , when writing your dissertation abstract. However, since this is not always the case, we briefly explain the difference between the two abstract styles - descriptive and informative - in the section, Choosing between dissertation abstract styles: Descriptive or informative . With the abstract being one of the most important parts of your dissertation, we explain the need for good structure, internal consistency, effective weighting between sections, amongst other factors, in the section, What readers expect from a dissertation abstract . We also highlight what readers are not looking for.

Even though every dissertation is different, there is a fairly common way to effectively structure your dissertation abstract. In the section, How to structure your dissertation abstract , we take you through the important components that the abstract should address, including the problem being addressed, the significance of the study, components of your research strategy, results and conclusions. Finally, knowing what you want to say and how to express that on the page are two different things. In the section, Useful phrases when writing a dissertation abstract , we set out phrases that you can use and build on when writing your dissertation abstract.

• ABSTRACT STYLES: Choosing between dissertation abstract styles: Descriptive or informative
• EXPECTATIONS: What readers expect from a dissertation abstract
• STRUCTURE: How to structure a dissertation abstract
• USEFUL PHRASES: Useful phrases when writing a dissertation abstract

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings . In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Bibliography
• Contributors
• Errors and Missing Dissertations

You are here

• Authors and Advisors
• How to Search
• Comments/Suggestions
• CSV File Download

Collective Actions: Moscow Conceptualism, Performance, and the Archive, 1976-1989

• EndNote XML

DOI: 10.26209/ahd

♿ Accessibility Help

A Publication of Penn State Libraries Open Publishing

Marx/Engels Internet Archive

Theses On Feuerbach Download PDF Written: by Marx in the Spring of 1845, but slightly edited by Engels; First Published: As an appendix to Ludwig Feuerbach and the End of Classical German Philosophy in 1888; Source: Marx/Engels Selected Works, Volume One, p. 13 – 15. Note that this version differs from the version of Engels’ edition published in MECW Volume 5, pp. 6-8; Publisher: Progress Publishers, Moscow, USSR, 1969; Translated: W. Lough from the German; Transcription/Markup: Zodiac/ Brian Baggins ; Copyleft: Marx/Engels Internet Archive (marxists.org) 1995, 1999, 2002. Permission is granted to copy and/or distribute this document under the terms of the Creative Commons ShareAlike License ; Proofread: by Andy Blunden February 2005. I The chief defect of all hitherto existing materialism – that of Feuerbach included – is that the thing, reality, sensuousness, is conceived only in the form of the object or of contemplation , but not as sensuous human activity, practice , not subjectively. Hence, in contradistinction to materialism, the active side was developed abstractly by idealism – which, of course, does not know real, sensuous activity as such. Feuerbach wants sensuous objects, really distinct from the thought objects, but he does not conceive human activity itself as objective activity. Hence, in The Essence of Christianity , he regards the theoretical attitude as the only genuinely human attitude, while practice is conceived and fixed only in its dirty-judaical manifestation. Hence he does not grasp the significance of “revolutionary”, of “practical-critical”, activity. II The question whether objective truth can be attributed to human thinking is not a question of theory but is a practical question. Man must prove the truth — i.e. the reality and power, the this-sidedness of his thinking in practice. The dispute over the reality or non-reality of thinking that is isolated from practice is a purely scholastic question. III The materialist doctrine concerning the changing of circumstances and upbringing forgets that circumstances are changed by men and that it is essential to educate the educator himself. This doctrine must, therefore, divide society into two parts, one of which is superior to society. The coincidence of the changing of circumstances and of human activity or self-changing can be conceived and rationally understood only as revolutionary practice . IV Feuerbach starts out from the fact of religious self-alienation, of the duplication of the world into a religious world and a secular one. His work consists in resolving the religious world into its secular basis. But that the secular basis detaches itself from itself and establishes itself as an independent realm in the clouds can only be explained by the cleavages and self-contradictions within this secular basis. The latter must, therefore, in itself be both understood in its contradiction and revolutionized in practice. Thus, for instance, after the earthly family is discovered to be the secret of the holy family, the former must then itself be destroyed in theory and in practice. V Feuerbach, not satisfied with abstract thinking, wants contemplation; but he does not conceive sensuousness as practical, human-sensuous activity. VI Feuerbach resolves the religious essence into the human essence. But the human essence is no abstraction inherent in each single individual. In its reality it is the ensemble of the social relations. Feuerbach, who does not enter upon a criticism of this real essence, is consequently compelled: To abstract from the historical process and to fix the religious sentiment as something by itself and to presuppose an abstract – isolated – human individual. Essence, therefore, can be comprehended only as “genus”, as an internal, dumb generality which naturally unites the many individuals. VII Feuerbach, consequently, does not see that the “religious sentiment” is itself a social product, and that the abstract individual whom he analyses belongs to a particular form of society. VIII All social life is essentially practical. All mysteries which lead theory to mysticism find their rational solution in human practice and in the comprehension of this practice. IX The highest point reached by contemplative materialism, that is, materialism which does not comprehend sensuousness as practical activity, is contemplation of single individuals and of civil society. X The standpoint of the old materialism is civil society; the standpoint of the new is human society, or social humanity. XI The philosophers have only interpreted the world, in various ways; the point is to change it.   Deutsch | 1938 translation of Marx’s original | 2002 translation of Marx’s original | MECW translation of Engels’ 1888 version Marx/Engels Works Archive | Study Guide | Engels on Feuerbach | Image of Thesis 11 | Works Index