experimental design and methods reading answers

• Full IELTS Practice Tests
• Practice Tests

The scientific method

• View Solution

Solution for: The scientific method

Answer table.

 Found a mistake? Let us know!

 Share this Practice Test

Exam Review

A - Karl Popper’s claim that the scientific method is hypothetico-deductive

‘Hypotheses,’ said Medawar in 1964, ‘are imaginative and inspirational in character’; they are ‘adventures of the mind’. He was arguing in favour of the position taken by Karl Popper in The Logic of Scientific Discovery (1972, 3rd edition) that the nature of scientific method is hypothetico-deductive and not, as is generally believed, inductive.

It is essential that you , as an intending researcher, understand the difference between these two interpretations of the research process so that you do not become discouraged or begin to suffer from a feeling of ‘cheating’ or not going about it the right way.

C - Explaining the inductive method

The myth of scientific method is that it is inductive : that the formulation of scientific theory starts with the basic, raw evidence of the senses - simple, unbiased, unprejudiced observation. Out of these sensory data - commonly referred to as ‘facts’ — generalisations will form. The myth is that from a disorderly array of factual information an orderly, relevant theory will somehow emerge. However, the starting point of induction is an impossible one.

D - The role of hypotheses in scientific research

There is no such thing as an unbiased observation. Every act of observation we make is a function of what we have seen or otherwise experienced in the past. All scientific work of an experimental or exploratory nature starts with some expectation about the outcome. This expectation is a hypothesis. Hypotheses provide the initiative and incentive for the inquiry and influence the method . It is in the light of an expectation that some observations are held to be relevant and some irrelevant, that one methodology is chosen and others discarded, that some experiments are conducted and others are not. Where is, your naive, pure and objective researcher now?

E - The testing of hypotheses

Hypotheses arise by guesswork, or by inspiration, but having been formulated they can and must be tested rigorously , using the appropriate methodology. If the predictions you make as a result of deducing certain consequences from your hypothesis are not shown to be correct then you discard or modify your hypothesis. If the predictions turn out to be correct then your hypothesis has been supported and may be retained until such time as some further test shows it not to be correct . Once you have arrived at your hypothesis, which is a product of your imagination, you then proceed to a strictly logical and rigorous process, based upon deductive argument — hence the term ‘hypothetico-deductive’. 

F - Anticipating results before data is collected

So don’t worry if you have some idea of what your results will tell you before you even begin to collect data ; there are no scientists in existence who really wait until they have all the evidence in front of them before they try to work out what it might possibly mean. The closest we ever get to this situation is when something happens by accident; but even then the researcher has to formulate a hypothesis to be tested before being sure that, for example, a mould might prove to be a successful antidote to bacterial infection.

G - How research is done and how it is reported

The myth of scientific method is not only that it is inductive (which we have seen is incorrect) but also that the hypothetico-deductive method proceeds in a step-by-step, inevitable fashion. The hypothetico-deductive method describes the logical approach to much research work, but it does not describe the psychological behaviour that brings it about. This is much more holistic — involving guesses, reworkings, corrections, blind alleys and above all inspiration, in the deductive as well as the hypothetic component -than is immediately apparent from reading the final thesis or published papers. These have been, quite properly, organised into a more serial, logical order so that the worth of the output may be evaluated independently of the behavioural processes by which it was obtained. It is the difference, for example between the academic papers with which Crick and Watson demonstrated the structure of the DNA molecule and the fascinating book The Double Helix in which Watson (1968) described how they did it. From this point of view , ‘scientific method’ may more usefully be thought of as a way of writing up research rather than as a way of carrying it out.

----------------------------------------------------

Great thanks to volunteer Ngoc Nguyen has contributed these explanations and question markings.

If you want to make a better world like this, please contact us.

Questions 1-5

Reading Passage has seven paragraphs A-G.

Choose the most suitable headings for paragraphs C-G from the list of headings below.

Write the appropriate numbers i-x in boxes 1-5  on your answer sheet.

1 i ii iii iv v vi vii viii ix x Paragraph C Answer: iv      Locate

2 i ii iii iv v vi vii viii ix x Paragraph D Answer: vii      Locate

3 i ii iii iv v vi vii viii ix x Paragraph E Answer: iii      Locate

4 i ii iii iv v vi vii viii ix x Paragraph F Answer: v      Locate

5 i ii iii iv v vi vii viii ix x Paragraph G Answer: vi      Locate

Questions 6-7

In which TWO paragraphs in Reading Passage does the writer give advice directly to the reader?

Write the TWO appropriate letters (A—G) in boxes 6-7  on your answer sheet.

6 A B C D E F G Answer: B/F (in either order)      Locate

7 A B C D E F G Answer: B/F (in either order)      Locate

Questions 8-11

Do the following statements reflect the opinions of the writer in Reading Passage?

In boxes 8-11  on your answer sheet write

YES if the statement reflects the opinion of the writer

NO if the statement contradicts the opinion of the writer

NOT GIVEN if it is impossible to say what the writer thinks about this

8 YES NO NOT GIVEN Popper says that the scientific method is hypothetico-deductive. Answer: YES      Locate

9 YES NO NOT GIVEN If a prediction based on a hypothesis is fulfilled, then the hypothesis is confirmed as true. Answer: NO      Locate

10 YES NO NOT GIVEN Many people carry out research in a mistaken way. Answer: NOT GIVEN

11 YES NO NOT GIVEN The ‘scientific method’ is more a way of describing research than a way of doing it. Answer: YES      Locate

Questions 12

Choose the appropriate letter A-D and write it in box 12  on your answer sheet.

Which of the following statements best describes the writer’s main purpose in Reading Passage?

A to advise Ph.D students not to cheat while carrying out research

B to encourage Ph.D students to work by guesswork and inspiration

C to explain to Ph.D students the logic which the scientific research paper follows

D to help Ph.D students by explaining different conceptions of the research process Answer: D

Other Tests

• 5 - TRUE-FALSE-NOT GIVEN
• 7 - Matching Headings
• 1 - Sentence Completion

There has always been a sense in which America and Europe owned film

• 0 unanswered
• 6 - TRUE-FALSE-NOT GIVEN
• 7 - Sentence Completion

How much higher? How much faster?

• Sports & Health
• 6 - YES-NO-NOT GIVEN
• 8 - Matching Headings

What Is a Port City?

Communicating styles and conflict.

• Recent Actual Tests
• 6 - Sentence Completion

Moles happy as homes go underground

• 5 - Matching Information
• 3 - Sentence Completion
• 6 - Summary, form completion

Stress of Workplace

Found a mistake let us know.

Please descibe the mistake as details as possible along with your expected correction, leave your email so we can contact with you when needed.

Describe what is wrong with the practice test:

Please enter description

Enter your name:

Enter your email address:

Please enter a valid email

IELTS Mentor "IELTS Preparation & Sample Answer"

• Skip to content
• Jump to main navigation and login

Nav view search

• IELTS Sample

IELTS Academic Reading Sample - 12 The Scientific Method

Ielts academic reading passage - the scientific method, the scientific method.

• Academic Reading
• Academic Reading Passage

Why is the answer 'NO' for Question number 37? Can someone point it out, please?

IELTS Materials

• IELTS Bar Graph
• IELTS Line Graph
• IELTS Table Chart
• IELTS Flow Chart
• IELTS Pie Chart
• IELTS Letter Writing
• IELTS Essay

Useful Links

• IELTS Secrets
• Band Score Calculator
• Exam Specific Tips
• Useful Websites
• IELTS Preparation Tips
• Academic Reading Tips
• Academic Writing Tips
• GT Writing Tips
• Listening Tips
• Speaking Tips
• IELTS Grammar Review
• IELTS Vocabulary
• IELTS Cue Cards
• IELTS Life Skills
• Letter Types

• Privacy Policy
• Cookie Policy
• Copyright Notice
• HTML Sitemap

Experimental Design: Types, Examples & Methods

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Experimental design refers to how participants are allocated to different groups in an experiment. Types of design include repeated measures, independent groups, and matched pairs designs.

Probably the most common way to design an experiment in psychology is to divide the participants into two groups, the experimental group and the control group, and then introduce a change to the experimental group, not the control group.

The researcher must decide how he/she will allocate their sample to the different experimental groups.  For example, if there are 10 participants, will all 10 participants participate in both groups (e.g., repeated measures), or will the participants be split in half and take part in only one group each?

Three types of experimental designs are commonly used:

1. Independent Measures

Independent measures design, also known as between-groups , is an experimental design where different participants are used in each condition of the independent variable.  This means that each condition of the experiment includes a different group of participants.

This should be done by random allocation, ensuring that each participant has an equal chance of being assigned to one group.

Independent measures involve using two separate groups of participants, one in each condition. For example:

• Con : More people are needed than with the repeated measures design (i.e., more time-consuming).
• Pro : Avoids order effects (such as practice or fatigue) as people participate in one condition only.  If a person is involved in several conditions, they may become bored, tired, and fed up by the time they come to the second condition or become wise to the requirements of the experiment!
• Con : Differences between participants in the groups may affect results, for example, variations in age, gender, or social background.  These differences are known as participant variables (i.e., a type of extraneous variable ).
• Control : After the participants have been recruited, they should be randomly assigned to their groups. This should ensure the groups are similar, on average (reducing participant variables).

2. Repeated Measures Design

Repeated Measures design is an experimental design where the same participants participate in each independent variable condition.  This means that each experiment condition includes the same group of participants.

Repeated Measures design is also known as within-groups or within-subjects design .

• Pro : As the same participants are used in each condition, participant variables (i.e., individual differences) are reduced.
• Con : There may be order effects. Order effects refer to the order of the conditions affecting the participants’ behavior.  Performance in the second condition may be better because the participants know what to do (i.e., practice effect).  Or their performance might be worse in the second condition because they are tired (i.e., fatigue effect). This limitation can be controlled using counterbalancing.
• Pro : Fewer people are needed as they participate in all conditions (i.e., saves time).
• Control : To combat order effects, the researcher counter-balances the order of the conditions for the participants.  Alternating the order in which participants perform in different conditions of an experiment.

Counterbalancing

Suppose we used a repeated measures design in which all of the participants first learned words in “loud noise” and then learned them in “no noise.”

We expect the participants to learn better in “no noise” because of order effects, such as practice. However, a researcher can control for order effects using counterbalancing.

The sample would be split into two groups: experimental (A) and control (B).  For example, group 1 does ‘A’ then ‘B,’ and group 2 does ‘B’ then ‘A.’ This is to eliminate order effects.

Although order effects occur for each participant, they balance each other out in the results because they occur equally in both groups.

3. Matched Pairs Design

A matched pairs design is an experimental design where pairs of participants are matched in terms of key variables, such as age or socioeconomic status. One member of each pair is then placed into the experimental group and the other member into the control group .

One member of each matched pair must be randomly assigned to the experimental group and the other to the control group.

• Con : If one participant drops out, you lose 2 PPs’ data.
• Pro : Reduces participant variables because the researcher has tried to pair up the participants so that each condition has people with similar abilities and characteristics.
• Con : Very time-consuming trying to find closely matched pairs.
• Pro : It avoids order effects, so counterbalancing is not necessary.
• Con : Impossible to match people exactly unless they are identical twins!
• Control : Members of each pair should be randomly assigned to conditions. However, this does not solve all these problems.

Experimental design refers to how participants are allocated to an experiment’s different conditions (or IV levels). There are three types:

1. Independent measures / between-groups : Different participants are used in each condition of the independent variable.

2. Repeated measures /within groups : The same participants take part in each condition of the independent variable.

3. Matched pairs : Each condition uses different participants, but they are matched in terms of important characteristics, e.g., gender, age, intelligence, etc.

Learning Check

Read about each of the experiments below. For each experiment, identify (1) which experimental design was used; and (2) why the researcher might have used that design.

1 . To compare the effectiveness of two different types of therapy for depression, depressed patients were assigned to receive either cognitive therapy or behavior therapy for a 12-week period.

The researchers attempted to ensure that the patients in the two groups had similar severity of depressed symptoms by administering a standardized test of depression to each participant, then pairing them according to the severity of their symptoms.

2 . To assess the difference in reading comprehension between 7 and 9-year-olds, a researcher recruited each group from a local primary school. They were given the same passage of text to read and then asked a series of questions to assess their understanding.

3 . To assess the effectiveness of two different ways of teaching reading, a group of 5-year-olds was recruited from a primary school. Their level of reading ability was assessed, and then they were taught using scheme one for 20 weeks.

At the end of this period, their reading was reassessed, and a reading improvement score was calculated. They were then taught using scheme two for a further 20 weeks, and another reading improvement score for this period was calculated. The reading improvement scores for each child were then compared.

4 . To assess the effect of the organization on recall, a researcher randomly assigned student volunteers to two conditions.

Condition one attempted to recall a list of words that were organized into meaningful categories; condition two attempted to recall the same words, randomly grouped on the page.

Experiment Terminology

Ecological validity.

The degree to which an investigation represents real-life experiences.

Experimenter effects

These are the ways that the experimenter can accidentally influence the participant through their appearance or behavior.

Demand characteristics

The clues in an experiment lead the participants to think they know what the researcher is looking for (e.g., the experimenter’s body language).

Independent variable (IV)

The variable the experimenter manipulates (i.e., changes) is assumed to have a direct effect on the dependent variable.

Dependent variable (DV)

Variable the experimenter measures. This is the outcome (i.e., the result) of a study.

Extraneous variables (EV)

All variables which are not independent variables but could affect the results (DV) of the experiment. Extraneous variables should be controlled where possible.

Confounding variables

Variable(s) that have affected the results (DV), apart from the IV. A confounding variable could be an extraneous variable that has not been controlled.

Random Allocation

Randomly allocating participants to independent variable conditions means that all participants should have an equal chance of taking part in each condition.

The principle of random allocation is to avoid bias in how the experiment is carried out and limit the effects of participant variables.

Order effects

Changes in participants’ performance due to their repeating the same or similar test more than once. Examples of order effects include:

(i) practice effect: an improvement in performance on a task due to repetition, for example, because of familiarity with the task;

(ii) fatigue effect: a decrease in performance of a task due to repetition, for example, because of boredom or tiredness.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• A Quick Guide to Experimental Design | 5 Steps & Examples

A Quick Guide to Experimental Design | 5 Steps & Examples

Published on 11 April 2022 by Rebecca Bevans . Revised on 5 December 2022.

Experiments are used to study causal relationships . You manipulate one or more independent variables and measure their effect on one or more dependent variables.

Experimental design means creating a set of procedures to systematically test a hypothesis . A good experimental design requires a strong understanding of the system you are studying. 

There are five key steps in designing an experiment:

• Consider your variables and how they are related
• Write a specific, testable hypothesis
• Design experimental treatments to manipulate your independent variable
• Assign subjects to groups, either between-subjects or within-subjects
• Plan how you will measure your dependent variable

For valid conclusions, you also need to select a representative sample and control any  extraneous variables that might influence your results. If if random assignment of participants to control and treatment groups is impossible, unethical, or highly difficult, consider an observational study instead.

Table of contents

Step 1: define your variables, step 2: write your hypothesis, step 3: design your experimental treatments, step 4: assign your subjects to treatment groups, step 5: measure your dependent variable, frequently asked questions about experimental design.

You should begin with a specific research question . We will work with two research question examples, one from health sciences and one from ecology:

To translate your research question into an experimental hypothesis, you need to define the main variables and make predictions about how they are related.

Start by simply listing the independent and dependent variables .

Then you need to think about possible extraneous and confounding variables and consider how you might control  them in your experiment.

Finally, you can put these variables together into a diagram. Use arrows to show the possible relationships between variables and include signs to show the expected direction of the relationships.

Here we predict that increasing temperature will increase soil respiration and decrease soil moisture, while decreasing soil moisture will lead to decreased soil respiration.

Prevent plagiarism, run a free check.

Now that you have a strong conceptual understanding of the system you are studying, you should be able to write a specific, testable hypothesis that addresses your research question.

The next steps will describe how to design a controlled experiment . In a controlled experiment, you must be able to:

• Systematically and precisely manipulate the independent variable(s).
• Precisely measure the dependent variable(s).
• Control any potential confounding variables.

If your study system doesn’t match these criteria, there are other types of research you can use to answer your research question.

How you manipulate the independent variable can affect the experiment’s external validity – that is, the extent to which the results can be generalised and applied to the broader world.

First, you may need to decide how widely to vary your independent variable.

• just slightly above the natural range for your study region.
• over a wider range of temperatures to mimic future warming.
• over an extreme range that is beyond any possible natural variation.

Second, you may need to choose how finely to vary your independent variable. Sometimes this choice is made for you by your experimental system, but often you will need to decide, and this will affect how much you can infer from your results.

• a categorical variable : either as binary (yes/no) or as levels of a factor (no phone use, low phone use, high phone use).
• a continuous variable (minutes of phone use measured every night).

How you apply your experimental treatments to your test subjects is crucial for obtaining valid and reliable results.

First, you need to consider the study size : how many individuals will be included in the experiment? In general, the more subjects you include, the greater your experiment’s statistical power , which determines how much confidence you can have in your results.

Then you need to randomly assign your subjects to treatment groups . Each group receives a different level of the treatment (e.g. no phone use, low phone use, high phone use).

You should also include a control group , which receives no treatment. The control group tells us what would have happened to your test subjects without any experimental intervention.

When assigning your subjects to groups, there are two main choices you need to make:

• A completely randomised design vs a randomised block design .
• A between-subjects design vs a within-subjects design .

Randomisation

An experiment can be completely randomised or randomised within blocks (aka strata):

• In a completely randomised design , every subject is assigned to a treatment group at random.
• In a randomised block design (aka stratified random design), subjects are first grouped according to a characteristic they share, and then randomly assigned to treatments within those groups.

Sometimes randomisation isn’t practical or ethical , so researchers create partially-random or even non-random designs. An experimental design where treatments aren’t randomly assigned is called a quasi-experimental design .

Between-subjects vs within-subjects

In a between-subjects design (also known as an independent measures design or classic ANOVA design), individuals receive only one of the possible levels of an experimental treatment.

In medical or social research, you might also use matched pairs within your between-subjects design to make sure that each treatment group contains the same variety of test subjects in the same proportions.

In a within-subjects design (also known as a repeated measures design), every individual receives each of the experimental treatments consecutively, and their responses to each treatment are measured.

Within-subjects or repeated measures can also refer to an experimental design where an effect emerges over time, and individual responses are measured over time in order to measure this effect as it emerges.

Counterbalancing (randomising or reversing the order of treatments among subjects) is often used in within-subjects designs to ensure that the order of treatment application doesn’t influence the results of the experiment.

Finally, you need to decide how you’ll collect data on your dependent variable outcomes. You should aim for reliable and valid measurements that minimise bias or error.

Some variables, like temperature, can be objectively measured with scientific instruments. Others may need to be operationalised to turn them into measurable observations.

• Ask participants to record what time they go to sleep and get up each day.
• Ask participants to wear a sleep tracker.

How precisely you measure your dependent variable also affects the kinds of statistical analysis you can use on your data.

Experiments are always context-dependent, and a good experimental design will take into account all of the unique considerations of your study system to produce information that is both valid and relevant to your research question.

Experimental designs are a set of procedures that you plan in order to examine the relationship between variables that interest you.

To design a successful experiment, first identify:

• A testable hypothesis
• One or more independent variables that you will manipulate
• One or more dependent variables that you will measure

When designing the experiment, first decide:

• How your variable(s) will be manipulated
• How you will control for any potential confounding or lurking variables
• How many subjects you will include
• How you will assign treatments to your subjects

The key difference between observational studies and experiments is that, done correctly, an observational study will never influence the responses or behaviours of participants. Experimental designs will have a treatment condition applied to at least a portion of participants.

A confounding variable , also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design , it’s important to identify potential confounding variables and plan how you will reduce their impact.

In a between-subjects design , every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design , each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word ‘between’ means that you’re comparing different conditions between groups, while the word ‘within’ means you’re comparing different conditions within the same group.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bevans, R. (2022, December 05). A Quick Guide to Experimental Design | 5 Steps & Examples. Scribbr. Retrieved 4 November 2024, from https://www.scribbr.co.uk/research-methods/guide-to-experimental-design/

Is this article helpful?

Rebecca Bevans