letter drive assignment

How to assign permanent letters to drives on Windows 10

You can assign drive letters manually, and in this guide, we show you how on Windows 10.

On Windows 10, when connecting a removable storage device or an internal hard drive, the system detects and assigns a drive letter automatically to make it usable. However, when reconnecting an external drive (such as a USB flash drive or SD or microSD cards), the system can end up assigning a different letter, which can be annoying.

If you want to see the same drive letter on a particular device, you can manually assign a permanent letter to any drive connected to your computer, and on Windows 10 , you can do this in at least three different ways, using Disk Management, Command Prompt, or PowerShell.

Using this approach will prevent Windows 10 from assigning a new letter or trying to set a letter already in use, which can cause conflicts. Also, it helps to select a drive letter that makes more sense to you.

In this Windows 10 guide, we walk you through several methods to manually assign a permanent letter to a drive, as long as you're connecting the drive to the same device and the letter isn't already in use.

How to assign a drive letter using Disk Management

How to assign a drive letter using command prompt, how to assign a drive letter using powershell.

To manage drive letters with the Disk Management tool, use these steps:

• Open Start .
• Search for Create and format hard disk partitions and click the top result to open the Disk Management experience.
• Right-click the drive and select the Change Drive Letter and Paths option.

• Click the Change button.

• Select the Assign the following drive letter option.
• Use the drop-down menu to assign a new drive letter. Quick tip: To avoid the system trying to assign the same letter to another drive, it's a good idea to start adding letters in backward order. For instance, instead of using D, E or F, it better to start with Z, Y or X when assigning a new letter.

• Click the OK button.
• Click the OK button again.

Once you complete these steps, the drive will permanently retain the assigned letter, even after reconnecting it. However, if you connect the drive to another device, it may receive a different letter.

While the easiest way to assign a new drive letter is to use Disk Management, you can also use DiskPart in Command Prompt to perform the same task.

Get the Windows Central Newsletter

All the latest news, reviews, and guides for Windows and Xbox diehards.

To assign a drive letter using Command Prompt, use these steps:

• Search for Command Prompt , right-click the result, and then select the Run as administrator option.
• Type the following command to start DiskPart and press Enter : diskpart
• Type the following command to list all the available volumes and press Enter : list volume
• Type the following command to select the volume (drive) to assign a new letter and press Enter: select volume 3 In the command, make sure to change "3" to the number that represents the drive on your device.
• Type the following command to assign a new drive letter, and press Enter : assign letter=Z The command assigns the letter "Z" to the drive assuming it's available. However, you need to make sure to change the letter for the one that you want to use.

After completing these steps, similar to Disk Management, every time you reconnect the storage to the same device, Windows 10 should assign the same letter automatically.

Alternatively, you can also use PowerShell to change a drive letter on Windows 10 using these steps:

• Search for PowerShell , right-click the result, and then select the Run as administrator option.
• Type the following command to list the available drives and press Enter : Get-Disk
• Type the following command to assign a permanent letter to the drive and press Enter : Get-Partition -DiskNumber 1 | Set-Partition -NewDriveLetter Z In the command, make sure to change "1" to the number that represents the drive that you want to modify, and change "Z" for the new letter that you want to use.

Once you complete the steps, the drive will be accessible through File Explorer using the letter that you assigned, and Windows 10 won't try to change it.

Updated March 7, 2019: We revised this guide to make sure it's current with the latest version of Windows 10.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions about Windows 10, visit the following resources:

• Windows 10 on Windows Central – All you need to know
• Windows 10 help, tips, and tricks
• Windows 10 forums on Windows Central

Mauro Huculak has been a Windows How-To Expert contributor for WindowsCentral.com for nearly a decade and has over 15 years of experience writing comprehensive guides. He also has an IT background and has achieved different professional certifications from Microsoft, Cisco, VMware, and CompTIA. He has been recognized as a Microsoft MVP for many years.

• 2 OpenAI's Strawberry AI models ship with advanced reasoning capabilities synonymous with humans, though they'll need "an extra moment to think" — Sam Altman says it "doesn't constitute AGI"
• 3 "Definitely wanted to, first and foremost, get keyboard and mouse right" — My first Ara: History Untold experience and new insights into PC and console, modding support, and strategy gameplay
• 4 What is the AppData folder? Windows 11 app data storage explained.
• 5 Make your own Minecraft movie with Microsoft's new Clipchamp templates

This browser is no longer supported.

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.

Change a drive letter

• 6 contributors

Applies to: Windows 11, Windows 10, Windows Server 2022, Windows Server 2019, and Windows Server 2016

If you want to change a drive letter assigned to a drive, or you have a drive that doesn't yet have a drive letter, use Disk Management to change it. You can also mount the drive in an empty folder so that it appears as a folder. For more information, see Mount a drive in a folder .

If you change the drive letter of a drive that already contains Windows or apps, apps might have trouble running or finding the drive. We suggest not changing the drive letter of a drive that already contains Windows or apps.

The following steps show how to change the drive letter.

Open Disk Management with administrator permissions.

In Disk Management, select and hold (or right-click) the volume on which you want to change or add a drive letter, and then select Change Drive Letter and Paths .

If you don't see the Change Drive Letter and Paths option or it's grayed out, the volume either isn't ready to receive a drive letter or it's unallocated and needs to be initialized . It might also be that the drive isn't accessible, which is the case with EFI system partitions and recovery partitions. If you've confirmed that your volume is formatted with a drive letter that you can access but you're still unable to change it, that's beyond the scope of this article. We suggest contacting Microsoft Support or the manufacturer of your PC for more help.

To change the drive letter, select Change . To add a drive letter if the drive doesn't already have one, select Add .

Select the new drive letter and choose OK . Then select Yes when prompted about how programs that rely on the drive letter might not run correctly.

Was this page helpful?

Additional resources

TechRepublic

Account information.

Share with Your Friends

How to assign a drive letter in Windows 10

Your email has been sent

When you connect a new drive to your PC, Windows automatically assigns the next available letter after C, which is normally used for your system drive. So an external hard drive or USB thumb drive could end up as D, E, F, or whatever, depending on how many drive letters are already being used.

This is all well and good, but what if you want to assign the drive a letter? Maybe you want to use M for your music files or X for your top-secret X-Files. Here’s how in Windows 10.

• Ensure that the drive you’re relettering isn’t in use and that no files from that drive are open.
• Right-click on the Start button.
• Click Disk Management to open the Disk Management console.
• Right-click the volume that has the drive letter you want to change.
• Click Change Drive Letter And Paths.
• Click the Change button.
• Choose from a list of available drive letters. (Don’t use A or B, which have historically been reserved for floppy drives and can sometime confuse older software.)
• Click Yes if a popup windows appears asking if you really want to do this.
• Close the Disk Management console.

You may need to restart your machine for the change to take effect, but once you do the drive will use the new letter.

More Windows tips…

• How to turn on or off hibernate in Windows 10
• Regain hard disk space by using Windows Update Cleanup in Windows 7 and 8.x
• Restore a Windows XP backup in Windows 8
• How to replace SkyDrive with Libraries in Windows 8.1
• Pro tip: Use an optical Recovery Drive in Windows 8.1

Subscribe to the Developer Insider Newsletter

From the hottest programming languages to commentary on the Linux OS, get the developer and open source news and tips you need to know. Delivered Tuesdays and Thursdays

Create a TechRepublic Account

Get the web's best business technology news, tutorials, reviews, trends, and analysis—in your inbox. Let's start with the basics.

* - indicates required fields

Sign in to TechRepublic

Lost your password? Request a new password

Reset Password

Please enter your email adress. You will receive an email message with instructions on how to reset your password.

Check your email for a password reset link. If you didn't receive an email don't forgot to check your spam folder, otherwise contact support .

Welcome. Tell us a little bit about you.

This will help us provide you with customized content.

Want to receive more TechRepublic news?

You're all set.

Thanks for signing up! Keep an eye out for a confirmation email from our team. To ensure any newsletters you subscribed to hit your inbox, make sure to add [email protected] to your contacts list.

• Is the Big Tech Boys Club Failing Women?
• Watch! Wolverine Movies in Order

How to Change a Drive Letter

Don't like the letters assigned to your drives in Windows? Change them!

• Emporia State University

• The Ultimate Laptop Buying Guide

What to Know

• Open Disk Management. Locate the drive you want to change. Right-click and choose Change Drive Letter and Paths > Change .
• Select the drive letter you want to assign from Assign the following drive letter . Then select OK and choose Yes .

The letters assigned to your hard drives, optical drives, and USB drives in Windows are not fixed. Use the Disk Management tool in Windows to change drive letters. These steps apply to Windows XP and newer versions of Windows .

How to Change Drive Letters in Windows

Follow these steps to change the driver letters in any version of Windows.

You can't change the drive letter of the partition that Windows is installed onto. On most computers, this is usually the C drive.

Open Disk Management , the tool in Windows that lets you manage drive letters, among [many] other things.

In Windows 11/10/8, Disk Management is also available from the Power User Menu ( WIN + X  keyboard shortcut) and is probably the quickest way to open it. You can also start Disk Management from the Command Prompt in any version of Windows, but starting it via Computer Management is probably best for most of you.

Locate from the list at the top, or from the map at the bottom, the drive you want to change the drive letter of.

If you're not sure that the drive you're looking at is really the one you want to change the drive letter for, you can right-click or tap-and-hold the drive and then choose Explore . If you need to, look through the folders to see if that's the right drive.

Right-click or tap-and-hold the drive and choose Change Drive Letter and Paths .

Select Change .

If you've selected the primary drive by accident, some versions of Windows will display a message that reads Windows cannot modify the drive letter of your system volume or boot volume.

Choose the drive letter you want Windows to assign to this storage device by selecting it from the Assign the following drive letter drop-down box.

You don't need to worry if the drive letter is already being used by another drive because Windows hides any letters you can't use.

Select OK .

Choose Yes to the Some programs that rely on drive letters might not run correctly. Do you want to continue? question.

If you have software installed to this drive, it might stop working properly after changing the drive letter. See details on this in the section below.

Once the drive letter change is complete, which usually only takes a second or two, you're welcome to close any open Disk Management or other windows.

The drive letter is different from the volume label. You can change the volume label using similar steps .

If You Have Programs Not on the Main Drive

Changing drive letter assignments for drives that have software installed to them may cause the software to stop working. This isn't quite as common with newer programs and apps but if you have an old program, especially if you're still using Windows XP or Windows Vista, this is likely to be a problem.

Fortunately, most of us don't have software installed to drives other than the primary drive (typically the C drive), but if you do, consider this your warning that you might need to reinstall the software after changing the drive letter.

No Changes for the Operating System Drive

You cannot change the drive letter of the drive that the Windows operating system is installed on. If you'd like Windows to exist on a drive other than C , or whatever it happens to be now, you can make that happen but you'll have to complete a clean install of Windows to do it. Unless you have a pressing need to have Windows exist on a different drive letter, we don't recommend going through all that trouble.

Change, Don't Switch

There's no built-in way to switch drive letters between two drives in Windows. Instead, use a drive letter that you don't plan on using as a temporary "holding" letter during the drive letter change process.

For example, let's say you'd like to swap Drive A for Drive B . Start by changing Drive A's letter to one that you don't plan on using (like X ), then Drive B's letter to Drive A's original one, and finally Drive A's letter to Drive B's original one.

Using the Command Prompt

You can also change the drive letter from Command Prompt . It's not as easy as using Disk Management and you can't see right away which letters are available to choose, but it is completely doable with the diskpart command.

Get the Latest Tech News Delivered Every Day

• Disk Management
• What Is a Partition?
• Understanding How to Map a Network Drive in Windows XP
• How to Change Folder Icons in Windows 11
• What Is a Volume Label of a Drive?
• How to Open Disk Management
• How to Fix 'The File or Directory is Corrupted and Unreadable' Errors
• How to Restore Hal.dll From the Windows XP CD
• Error 0x80071ac3: What It Means and How to Fix It
• Diskpart Command
• How to Partition a Hard Drive (Windows 11, 10, 8, 7, +)
• How to Use the Net Use Command in Windows
• How to Change Directories in CMD (Command Prompt)
• Use SFC /Scannow to Repair Windows System Files
• Step-by-Step Guide to Resetting a Windows 7 Password
• How to Reset a Windows Vista Password

How to Change a Drive Letter in Windows

Sometimes when you plug in a USB device, it doesn't show up

A task you will most likely have to perform a few times in Windows is changing the drive letter for an external hard drive, mapped network drive, or DVD drive. Sometimes when you plug in a USB flash drive, it doesn’t automatically get a drive letter assigned to it and it may not show up on your computer.

In those types of cases, you have to change the drive letter for the device and it will normally pop right up. In this article, I’ll show you how to change the drive letter for these devices using the GUI and also via the command prompt.

Change Drive Letter via Disk Management

You can open disk management on a Windows PC by either right-clicking on the Computer or This PC icon on the desktop and choosing Manage or by clicking on Start and typing in diskmgmt.msc .

You’ll see a list of volumes at the top and the disks and partitions at the bottom. Any partition that has a drive letter will be shown in the white area. If you connected a USB drive and you see it listed, but it doesn’t have a drive letter, you can now assign one.

To assign or change the drive letter for a disk or partition, simply right-click on it and choose Change Drive Letter and Paths .

A window will pop up with the current drive letter, if there is one, and a couple of options. Here you want to click on Change .

Next, you will choose the new drive letter from the dropdown list. You can pick from the letters A to Z.

That’s about it. Click OK to close out all the dialogs and the drive should now show up in Windows with the new drive letter. If you’re having issues using the GUI interface or you simply feel more comfortable using the command prompt, read the instructions below on how to use diskpart.

Use DiskPart to Assign Drive Letter

If you need to change or assign a drive letter via the command prompt, you have to use the diskpart command. I’ve written a bit on how to use diskpart , which is really useful for many disk management tasks.

To get started, open an administrator command prompt in Windows by clicking on Start, typing in CMD and then right-clicking and choosing Run as Administrator .

Now type in the following commands, each followed by the Enter key.

Above, you’ll replace x with the volume number in the list that corresponds to the drive you want to change and with the letter you want to assign to the drive. Here are the commands I ran for an external USB drive:

You’ll also notice that under the Type column, external drives will show up as Removable . That’s a good way to check before you select a volume. You can also figure out which drive is correct by looking at the size and also looking at the Info column. Volume 0 in my case is the system partition, so I wouldn’t want to mess with that by accident.

Overall, it’s a fairly simple process and hopefully you won’t run into any problems. There are times, however, when things don’t work properly. Below are some possible reasons.

Troubleshoot Can’t Change Drive Letter in Windows

One problem that I have seen is that the Change Drive Letter option is simply greyed out. This can occur for a few reasons. One of the main reasons is the volume is not formatted in FAT or NTFS format. For example, if you are attaching a disk from a Mac computer, you will not be able to change the drive letter unless you format the drive into a compatible format.

Another reason is if the drive is set to read-only. If so, you’ll have to Google the steps to change the drive to allow read/write access.

Also, if you don’t need any of the data on the volume in question, a simple solution is to delete the volume, which is normally never greyed out. Once you delete the volume, you can right-click again and create a new simple volume. Now you will be able to change the drive letter.

Founder of Help Desk Geek and managing editor. He began blogging in 2007 and quit his job in 2010 to blog full-time. He has over 15 years of industry experience in IT and holds several technical certifications. Read Aseem's Full Bio

Read More Posts:

• All about AI
• Google Gemini AI
• Inflection AI Pi Chatbot
• Anthropic Claude
• Multimodal AI
• Generative AI
• AI Image Generation
• AI VIdeo Generation
• AI Coding Assistants
• AI Regulation
• AI Research
• Large Language Models (LLM)
• Microsoft Azure
• Google Cloud
• Amazon Web Services (AWS)
• Surface Pro
• Surface Laptop
• Surface Book
• Surface Duo
• Surface Neo
• Surface Studio
• Surface Hub
• Surface Pen
• Surface Headphones
• Surface Earbuds
• About WinBuzzer
• Follow Us: PUSH, Feeds, Social
• Join our Team
• Cookie Policy and Privacy Policy
• Terms of Service

How to Assign / Change Drive Letter in Windows 10

We show you how to change the drive letter in CMD, DIsk Management, PowerShell, and Registry editor in Windows 10.

Table of Contents:

Windows 10 helpfully assigns drive letters to disks as they're added, but they aren't always the most logical choices. While we all know that C: is the system drive, it doesn't make quite as much sense to have D: as your games drive or E: as your media drive. Luckily it's quite easy to change a drive letter in Windows 10, and we're going to walk you through the process today.

How does Windows 10 drive letter assignment work?

For the most part, Windows 10 automatically assigns letters to drives as they're connected, in alphabetical order. However, there are a few exceptions to this rule that may leave some users confused.

As mentioned earlier, C: is always reserved for the system drive, but A: and B: are reserved too, for rarely used floppy drives. Because of Windows automatic assignment, you may have also noticed that Windows changes the drive letter of your USB stick if you've connected another before it.

If you want letters that are easier to identify in bios or don't want your USB letters jumping around, it's quite easy to permanently change a drive letter in Windows 10 to something of your choosing. We're going to cover a few different ways today, including how to change the drive letter in CMD.

How to Change Drive Letter in Windows 10 via Disk Management

The most user-friendly way to assign drive letters in Windows is through the Disk Management interface, which is relatively easy to use.

How to Change Drive Letter in CMD using a DISKPART Disk Management Command

Though it's not quite as user-friendly, it can be much faster to change a drive letter with Command Prompt.

How to Change Drive Letter in Windows 10 with a PowerShell Disk Management Command

Those more familiar with PowerShell can use this method instead to achieve the same result.

How to Change / Assign a Drive Letter via the Registry Editor

Alternatively, if none of the above methods worked or you're just feeling brave, you can modify the drive letter via the registry. Just be sure to read our safe registry editing guide first.

If you enjoyed this guide, you may want to consider enabling or disabling disk caching or turning on BitLocker for your newly customized drives.

Recent News

Nvidia CEO Confirms Blackwell GPUs to Ship in Q4 Amid Production...

Google Faces US Legal Action Over Gemini AI Branding

Elon Musk Criticizes Australian Misinformation Bill as “Fascist”

More Recovery Products

•   Partition Manager     Partition Master for Windows Windows Disk Partition Manager   Partition Master for Mac Mac Hard Disk Manager   WinRescuer Windows Boot Repair Tool   Disk Copy Hard drive cloning utility Partition Master Free Partition Master Pro Partition Master Enterprise Edition Comparison

Centralized Solutions

MSPs Service

Screen Capture

Video & Audio Tools

Transfer Products

File Management

iOS Utilities

More Products

• Support     Support Center Guides, License, Contact   Download Download installer   Chat Support Chat with a Technician   Pre-Sales Inquiry Chat with a Sales Rep   Premium Service Solve fast and more

EaseUS Partition Master

3 Simple Ways to Assign a Drive Letter in Windows 10/8/7

How to assign a drive letter in Windows 10/8/7? This post covers three ways to assign a drive letter by using Disk Management, a partition manager, and Diskpart in CMD.

 Windows 11/10/8/7  100% Secure

Page Table of Contents

About the Author

Updated on Apr 19, 2024

What Is a Drive Letter

A drive letter is an alphabetic character identifying a physical computer disk or drive partition. Windows will assign an accessible drive letter by default, to any storage device. It starts from A to Z, going through all the alphabet. Windows will assign an accessible drive letter by default, to any storage device.

The system reserves the drive letters A: and B: for the floppy drive and portable media, such as tape drives. Even if your computer doesn't have these drivers installed. But you can still assign such letters manually if you wish. On computers with hard drives, the default drive letter is always C:. The CD-ROM or other disc drive is the last drive letter (e.g., D:). It's because C: is the first drive letter available on a hard disk. The drive letter C: can only be assigned to the drive on which Windows or MS-DOS is installed.

Windows will always be the drive letter C:,  even if you have several operating systems running. Most modern desktops and laptops now have hard drives and disc drives, like DVD drives, but not floppy disks. Even in this case, the C: drive is assigned to the hard drive, and the D: drive is assigned to the DVD drive.

Windows assigns the last drive letter to flash drives, smartphones, and other drives. For example, if the last drive letter was F:, and you plug a new drive, it is allocated as a G: drive until you unplug it. If you install more drives or create new partitions, they are allocated to drive letters other than C:, like D:, E:, F:, G:, and so on. Instead of the drive letter given by Windows, you may alter it to any other accessible drive letter.

How Assigned Drive Letters Work

You can alter the drive letter assigned by Windows. In the case you alter a drive's drive letter, the registry saves it per drive and volume ID. This does not permanently assign a drive letter to the device. The drive letter on your PC may change if you unplug the device or if you alter it.

If you use many USB drives, you may have observed that the drive letter changes each time you attach one. When non-assigned drives are attached, the letters D and onwards are assigned in turn. If the assigned drive is not attached, Windows will assign its drive letter to another drive. If you connect the drive with the given drive letter later, it will be assigned the next available letter.

Windows gives you several options for changing the drive letter of your computer. With this guide, you'll learn how to assign drive letters using three different tools. We will use Disk Management, EaseUS Partition Master, and Windows Command Prompt.

Extended Reading: Drive Letter Not Available

Assign a Drive Letter on Windows 10 with Disk Management

The Disk Management utility that comes with Windows lets you manage your disks. Change drive letters , create new partitions, delete existing partitions, and more.

Follow the steps below to change the drive letter.

Step 1. You will need to open Disk Management with administrator privileges. Right-click on the Start button, then choose Disk Management.

Step 2. In the Disk Management window, right-click the volume you want to change or add a drive letter. Then click "Change Drive Letter and Paths".

Step 3. Pick "Change" to alter the drive letter. Or pick "Add" to add a drive letter for drives without one.

Step 4. Choose a new drive letter, click "OK". The Disk Management will warn you that some programs might not run properly. Just close the window by clicking "Yes" to confirm.

Assign and Change Drive Letter with EaseUS Partition Manager

Your team is working on a project and you need to copy some files to a USB drive. But you have no idea what is the drive letter of the USB of your team. Most people have dealt with this issue before. As an easy solution, you can assign a drive letter to each driver using EaseUS Partition Master .

Users can manage disks with EaseUS Partition Manager without needing to go through a lengthy process. This program also provides advanced features such as  resize/move partition to solve low disk space issues, merge partitions, clone disk , create/delete/format partition, wipe data, disk/partition conversion, etc.

Now, free download this easy partition tool to assign drive letters with simple clicks.

Step 1.  Run EaseUS Partition Master, right-click the target partition, and choose "Change Drive Letter".

Step 2.  In the new window, click the down arrow and choose a drive letter for the partition from the drop-down menu, then click "OK".

Step 3.  Click the "Execute 1 Task(s)" button in the top-left corner, check the changes, and click "Apply" to change the drive letter of the selected partition.

Assign a Drive Letter Windows 10 Using Command Prompt

Windows Command Prompt can be used to assign drive letters to any directory on a computer. It especially benefits users with many storage devices connected to their computers. Below, we will show step-by-step how to change a drive letter with the command prompt.

Step 1. Access the elevated command prompt. Press Windows + S to run the search box. Type cmd . When the command prompt appears, right-click and select "Run as administrator".

Step 2. Type diskpart at the command prompt. Press Enter.

Step 3. Type list volume , then press Enter.

Step 4. Pay attention to the volume number of the drive you want to change the letter. Type select volume . Substitute volume number by the number of the volume inside the <>.

Step 5. Type assign letter . Substitute the new drive letter with the new letter for the drive inside the <>. Done. After finishing, you can close the command prompt.

You can assign different letters for your drivers in various ways. For example, with Windows Disk Management, and from the command prompt. But EaseUS partition manager gives you total control over your hard drive.

EaseUS Partition Master will assign a drive letter to any drive or partition and much more. Besides changing drive letters, you can also delete, split and wipe partitions. All without having to restart your PC several times or risk losing data. These features allow avoiding complicated procedures when working with multiple partitions.

How Can We Help You

Updated by Sherly 

Sherly joined EaseUS in 2022 and she has always loved writing articles and enjoys the fun they bring. She receives professional training here, focusing on product performance and other relative knowledge. She has written over 200 articles to help people overcome computing issues.

Read full bio

Written by Cedric 

Cedric Grantham is a senior editor and data recovery specialist of EaseUS. He mainly writes articles and how-to tips about data recovery on PC and Mac. He has handled 10,000+ data recovery cases and is good at data recovery of NTFS, FAT (FAT32 and ExFAT) file systems, and RAID structure reorganization.

Product Reviews

 Product Reviews

I love that the changes you make with EaseUS Partition Master Free aren't immediately applied to the disks. It makes it way easier to play out what will happen after you've made all the changes. I also think the overall look and feel of EaseUS Partition Master Free makes whatever you're doing with your computer's partitions easy.

Partition Master Free can Resize, Move, Merge, Migrate, and Copy disks or partitions; convert to local, change label, defragment, check and explore partition; and much more. A premium upgrade adds free tech support and the ability to resize dynamic volumes.

It won't hot image your drives or align them, but since it's coupled with a partition manager, it allows you do perform many tasks at once, instead of just cloning drives. You can move partitions around, resize them, defragment, and more, along with the other tools you'd expect from a cloning tool.

Related Articles

Lenovo VS Dell: Which Is Better [New Details]

How to Fix SSD Full for No Reason

How to Execute Lenovo Wipe Hard Drive [Proven Ways]

How to Check SD Card for Errors | How to Check SD Card Health

Hot Topics in 2024

Top Ways to Resolve 100% Disk Usage on Windows 10

How to Partition A Hard Drive in Windows 11/10 [2024 New]

How to Format Pendrive Using CMD [Step-by-Step Guide]

How to Convert MBR to GPT Without OS [MBR to GPT Guide]

How to Merge Partitions in Windows 10 [Safe and Quick Guides]

[Fixed] Windows Cannot be Installed to This Disk - Step by Step Guide

3+ Solutions: Solve C Drive Full and Out of Space in Windows 11/10/8/7

How to Move Windows to Another Drive [Safe & Easy]

Manage partitions and optimize disks efficiently

Get EaseUS Partition Master

Your best companion for disk partitioning, MBR to GPT/GPT to MBR conversion,even OS migration

Copyright ©   EaseUS. All rights reserved.

Success, thanks for submitting!

How to change drive letter on Windows 11

Here are four ways to assign a different letter to a drive on Windows 11.

On Windows 11 , a “drive letter” is automatically assigned to each internal storage, USB drive, DVD drive, and map network drive to identify the volume and make it available on File Explorer or other applications. However, you can change the drive letter to anything you want without deleting the data on the storage. For instance, if you want a drive to use a specific letter related to the content, or the system tries to assign a letter already in use, preventing the storage from appearing on File Explorer and apps.

Whatever the reason, on Windows 11, you can assign a different drive letter in at least four ways using the Settings app, Disk Management, Command Prompt, and PowerShell.

A drive letter (or device letter) can be any character from the English alphabet. However, you cannot use the “C:” because it’s reserved for the main storage that contains the installation. Also, “A:” and “B:” are reserved letters that used to be assigned automatically to floppy drives.

This guide will teach you how to assign a new drive letter on Windows 11.

Change drive letter on Windows 11

• Change drive letter from Disk Management on Windows 11

Change drive letter from Command Prompt on Windows 11

Change drive letter from powershell on windows 11.

To change the drive letter on Windows 11, use these steps:

Open Settings on Windows 11.

Click on System .

Click the Storage tab.

Under the “Storage management” section, click the “Advanced storage settings” option.

Click on Disks & volumes .

Select the drive with the volume with the letter to change.

Select the volume and click the Properties button.

Click the “Change drive letter” button.

Select the new drive letter for the device connected to Windows 11.

Click the OK button.

Once you complete the steps, the system will change the drive’s letter on Windows 11.

Change drive letter from Disk Management

To change the drive letter with Disk Management, use these steps:

Open Start .

Search for Create and format disk partitions and click the top result to open the Disk Management tool.

Right-click the volume and select the “Change Drive Letter and Paths” option.

Click the Change button.

Select the “Assign the following drive letter” option.

Choose a different letter for the drive.

Click the OK button again.

After completing the steps, the drive will appear in File Explorer with the new letter.

To add a new drive letter with Command Prompt, use these steps:

Search for Command Prompt , right-click the result, and select the Run as administrator option.

Type the following command to launch diskpart and press Enter :

Type the following command to list the volumes and press Enter :

Type the following command to select the volume (drive) to change the letter and press Enter :

In the command, change “2” for the number corresponding to the storage you want to change the letter.

Type the following command to change the drive letter on Windows 11 and press Enter :

In the command, change “H” for the letter you want to use with the drive.

Once you complete the steps, the diskpart tool will assign the new letter to the storage.

To change a Windows 11 drive letter with PowerShell, use these steps:

Search for PowerShell , right-click the result, and select the Run as administrator option.

Type the following command to identify the hard drive to change the letter and press Enter :

Type the following command to assign or change the drive letter to internal or external and press Enter :

In the above command, change “0” with the disk number of the drive you want to format and “F:” with the letter you wish to assign to the storage.

After completing the steps, the drive will have a new letter assignment. If the drive was previously missing, it will appear in File Explorer.

Mauro Huculak is a Windows How-To Expert who started Pureinfotech in 2010 as an independent online publication. He has also been a Windows Central contributor for nearly a decade. Mauro has over 15 years of experience writing comprehensive guides and creating professional videos about Windows and software, including Android and Linux. Before becoming a technology writer, he was an IT administrator for seven years. In total, Mauro has over 21 years of combined experience in technology. Throughout his career, he achieved different professional certifications from Microsoft (MSCA), Cisco (CCNP), VMware (VCP), and CompTIA (A+ and Network+), and he has been recognized as a Microsoft MVP for many years. You can follow him on X (Twitter) , YouTube , LinkedIn and About.me . Email him at [email protected] .

• How to upgrade Windows 7 to Windows 10 using clean install process
• How to reset Settings app on Windows 10

We hate spam as much as you! Unsubscribe any time Powered by follow.it ( Privacy ), our Privacy .

Sign up for our daily newsletter

• Privacy Policy
• Advertise with Us

How to Remove and Assign Drive Letters in Windows with Diskpart

Diskpart is one of the most powerful Windows command line utilities which first appeared in Windows XP. Diskpart is mainly used by Windows administrators to manage tasks like partition management, formatting, creating, re-sizing and getting a detailed information regarding the hard disk or other removable disks attached to the computer. Even though you have a built-in GUI application called Disk Management utility in Windows, Diskpart is much more flexible and works well in a server environment where you need to set up some advanced features like RAID.

Note: This post isn’t intended for beginners, and doing something wrong while using Diskpart utility may cause drive failures and data losses, so make sure that you have a good backup before continuing. You have been warned.

Assign Drive Letter Using Diskpart

Assigning a new drive letter to a partition or removable device using Diskpart is really easy. First, search for the command prompt in the Start menu, right click on it and select the option “Run as administrator.” If you are using Windows 8, press “Win + X” to open the power user menu and select the option “Command Prompt (Admin).”

The above action will open the command prompt window with administrative rights. Here enter the following command to start the Diskpart utility.

The next step is to list all the volumes in your computer so that you can clearly see all the volume numbers and drive letters of your hard disk partitions and any other removable devices. Use the command below to list all the volumes.

Once the Diskpart utility lists all the volumes, take a note of the volume number of the drive you want to assign a new drive letter. In my case, I’m trying to assign a new drive letter to the drive I:\ , so my volume number is 7 . Now execute the following command to select the volume while replacing the # symbol with an actual volume number.

Once the volume is selected, use the following command to assign a new drive letter. Don’t forget to replace the letter “V” with the drive letter you want to assign.

That’s all there is to do; you have successfully changed or re-assigned a new drive letter to a partition or a removable drive in Windows. In fact, if you open the Windows explorer, you can see that the change is reflected immediately.

Remove Drive Letter using Diskpart

Before moving any further, removing or un-assigning drive letter will effectively hide the drive or partition from plain sight, i.e. you cannot see that drive in the Windows explorer. To remove a drive letter, follow the above steps 1 through 4 and then use the below command to remove the drive letter of a drive or partition. Don’t forget to replace the letter “I” with the actual drive letter.

As soon as you have done that, Diskpart will remove the drive letter for that volume. If you list the volumes again, you will see that the drive you just interacted with will have no drive letter next to it.

Moreover, if you navigate to the Windows explorer, you will see that the drive which got un-assigned isn’t listed anymore. But again, always be careful while you are messing around with Diskpart utility; it may cause irrecoverable data loss if used incorrectly.

Hopefully that helps, and do comment below if you face any problems while following the steps or to simply share your thoughts.

Our latest tutorials delivered straight to your inbox

Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.

How to Change Drive Letter in Windows 11: A Step-by-Step Guide

If you’re looking to change a drive letter in Windows 11, you’re in luck! It’s a straightforward process that only takes a few minutes. You can do it through the Disk Management tool, which lets you assign a new letter to any of your drives. Just follow these simple steps to get it done.

How to Change Drive Letter in Windows 11

Changing a drive letter in Windows 11 will help you organize your drives better and make them easier to identify. Here are the steps to change a drive letter:

Step 1: Open Disk Management

Type “Disk Management” in the search bar and click on “Create and format hard disk partitions.”

Disk Management is the tool you’ll use to change the drive letter. It gives you a visual layout of all your drives.

Step 2: Locate the Drive

Find the drive for which you want to change the letter.

Scroll through the list of drives in Disk Management until you find the one you want to modify. Take note of its current letter.

Step 3: Right-click the Drive

Right-click on the drive and select “Change Drive Letter and Paths.”

A context menu will pop up when you right-click. This menu lets you access different settings for the drive, including changing its letter.

Step 4: Click “Change”

In the window that appears, click the “Change” button.

This action will bring up another window where you can select a new drive letter.

Step 5: Choose a New Letter

Select a new drive letter from the dropdown menu and click “OK.”

Make sure to choose a letter that’s not already in use by another drive. This will avoid any conflicts.

Step 6: Confirm Your Choice

Click “Yes” to confirm the change when prompted.

Windows will ask you to confirm the change. Just click “Yes” to finalize it.

After completing these steps, your drive will have the new letter you assigned to it. This can help you better organize your drives and make them easier to find.

Tips for Changing Drive Letter in Windows 11

• Backup First: Always create a backup of important data before making changes to your drives.
• Choose Wisely: Avoid commonly used drive letters like A, B, and C to prevent conflicts.
• Reboot if Needed: Sometimes a reboot is necessary for the changes to take full effect.
• Avoid Network Drives: Changing letters on network drives can cause connectivity issues.
• Remember New Letter: Make sure to update any shortcuts or programs that rely on the old drive letter.

Frequently Asked Questions

Why would i need to change a drive letter.

Changing a drive letter can help you organize your storage better or resolve conflicts with software that expects a drive to be a certain letter.

Can I change the drive letter of my system drive (C:)?

No, it’s generally not recommended to change the drive letter of your system drive, as it can cause your operating system to malfunction.

Will changing a drive letter affect my files?

No, changing the drive letter won’t affect your files themselves. However, shortcuts or programs pointing to the old drive letter will need to be updated.

What if the letter I want to use is already taken?

You will need to assign a different letter that is not in use. You can free up a letter by changing the drive letter of the currently assigned drive.

Do I need to restart my computer after changing a drive letter?

Most of the time, the change will take effect immediately. However, sometimes a reboot is required for the changes to fully apply.

• Open Disk Management.
• Locate the drive.
• Right-click the drive.
• Click “Change.”
• Choose a new letter.
• Confirm your choice.

Changing a drive letter in Windows 11 is easier than you think! Whether you’re doing it to resolve a conflict, better organize your files, or just because you prefer a certain letter, Disk Management makes the process straightforward. Just remember to choose a letter that’s not in use, back up any important data beforehand, and restart your computer if necessary.

Now that you know how to change a drive letter on Windows 11, why not give it a try? It’s a small tweak that can make a big difference in how you interact with your computer. And if you’re curious about more ways to customize your Windows experience, there’s a whole world of tips and tricks out there waiting for you. Happy computing!

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Share this:

Related posts:.

• How to Get to Disk Management Windows 10: A Quick and Easy Guide
• How to Make All Columns the Same Width in Excel 2013
• How to Open Disk Management in Windows 10: A Step-by-Step Guide
• How to Merge Drives in Windows 10: Step-by-Step Guide for Beginners
• How to Check Partition Scheme in Windows 10: A Step-by-Step Guide
• Mastering Disk Management on Windows 10: A Comprehensive Guide
• Managing Disk Partitions on Windows 11: A Step-by-Step Guide
• How to Hide Drive in Windows 10: A Step-by-Step Guide for Privacy
• How to Merge Two Drives in Windows 11: A Step-by-Step Guide
• How to Initialize SSD Windows 11: Step-by-Step Setup Guide for Beginners
• How to Check Total Hard Disk Space in Windows 11: A Step-by-Step Guide
• How to Fix Insufficient Space on a Disk in Microsoft Word
• What Are Three Ways to Change Column Width in Excel?
• How to Free Up Disk Space Windows 11: Easy and Effective Methods Explained
• How to Create Partition in Windows 11: A Step-by-Step Guide for Users
• How to Shrink Volume in Windows 10: A Step-by-Step Guide
• How to Run Chkdsk Windows 10: A Step-by-Step Guide for PC Health
• How to Initialize SSD Windows 10: A Step-by-Step Guide for Beginners
• How to Change the Name of a Flash Drive in Windows 7
• How to Partition SSD in Windows 11: Step-by-Step Guide for Beginners

Home » Tech Tips » Windows » How to Assign or Change Drive Letter in Windows 11?

How to Assign or Change Drive Letter in Windows 11?

Windows by default uses C drive (C:) for hosting system and application files. You can choose different drives like D: instead of C: while installing Windows on your computer. Similarly, it is also possible to manually change the installed app’s location , though generally users install apps on C: drive. Did you anytime think of changing the existing drive letters in your system? Here is how you can do that in Windows 11 PC.

Default Drive Name Assignments in Windows 11

Let us say, you have two partitions C: and D: volumes on your hard disk. Here is how the default drive letter assignment in Windows work:

• A: – floppy disk drive for IBM computers (obsolete)
• B: – floppy drive for MS-DOS and Windows computers (obsolete)
• C: – Windows and app installation files
• D: – storage space partition
• E: – the letter after your storage partition for CD drive (if CD/DVD drive is available)
• F: onwards – removable storage disks like USB and external hard disks

When you have more partitions on the hard drive, system will use the next drive letters like E: or F: when you insert an external drive. For example, when you have C: and D: drives on your hard disk and insert an USB drive , it will take the letter E: or later.

Changing Drive Letters in Windows 11

It is not necessary to live with the assigned drive letters forever on your system. You can either reduce / increase the drive’s space and assign new letters or simply change an existing drive’s letter. For example, you have 400GB D: drive which you can simply change to F: drive. Alternatively, you can divide it into 200GB + 200GB drives and name them as G: and H: drives.

Windows 11 makes it easy to change the drive letters from the Settings app without using registry or changing system files. However, you can also do the same from Computer Management as with the case in Windows 10 .

1. Change Drive Letter from Windows 11 Settings

If you want to change the assigned drive letters for any partition on your hard disk except C drive then this is the option you should proceed with.

• Press “Win + I” keys or use Windows Search to find Windows Settings app.
• Once you are in the Settings app, go to “System” tab and then click on “Storage” option.

• Go down to the bottom of the “Storage” settings section and click on “Advanced storage settings” available under “Storage management” section.

• This will expand the section and click on “Disks & volumes” option.

• The “Disks and volumes” section will show all your existing drives and click on the one you want to change the letter name. it will show two buttons – “Explore” and “Properties” and click on the “Properties” button.

• On the next screen, you can see the buttons for “Change label” and “Change drive letter”.

• Click “Change drive letter” button and select your favorite letter from the dropdown to assign.

The dropdown will show all letters except C: and the current volume. In the above example, we want to change the D: drive and the system shows A to Z letters except C and D. Since D is the current volume, it is not shown in the list. But C is not shown because it is a system volume partition and you cannot change the drive letter for C. You will not see “Change drive letter” button when selecting properties of C drive. However, you can assign A and B for drive letters which were once reserved only for floppy disks. Since floppy disk is obsolete Windows allows you to assign those reserved drive letters A and B also.

2. Change Drive Letter from Disk Management in Windows 11

Though changing drive letter is easy with Windows Settings, it does not allow changing C drive letter. You can use Disk Management app for changing any drive letter with additional features.

• Press “Win + R” keys to Run prompt .
• Type compmgmt.msc and press “OK” button.

• This will open Computer Management app and select “Disk Management” from the sidebar available under “Storage” section.
• You will see all the drives available on your computer and select C or D or any drive that you want to assign a new letter.
• Go to “Action > All Tasks > Change Drive Letter and Paths…” menu.

• On the pop-up that appears, click on “Change…” button.

• Click on the dropdown against “Assign the following drive letter:” option.
• Select your favorite letter and click “OK” button.

Here you will see all the drive letters except D which is already assigned to another partition volume on the hard disk. Though it is possible to change drive letter for C, we do not recommend as it can affect the installed programs on your computer. Most programs by default install under “Program Files” section in C drive. Changing the drive letter may affect the installed programs and they may stop working. In such a case, you need to uninstall and reinstall the program on the new drive again. This will be a big task if multiple programs stopped working. Therefore, choose the system drive when you clean install Windows first time and stick with that. If you are using preinstalled Windows on C drive, then continue to use that without changing. You can change all other drives using Disk Management or Windows Settings app.

If you want to create parition, select the volume and right click on it. From the menu, select “Shrink Volume” option and select the reduced size for your volume. The remaining size will become unallocated for which you can assign a new label and letter as explained above. Learn more about how to create disk paritions in Windows computer .

Assigning Drive Letter to Removable Disks

As mentioned, Windows will assign the available drive letter for removable disks after the current partition volumes. The problem is when you have multiple removable disks, the assigned letters will change every time which may confuse you. The good part is that you can assign a drive letter as explained above for your removable USB or external hard disk. Windows will remember the assigned letter and use the same whenever you insert the external drive. However, make sure to use the letters clearly away from the current and CD/DVD drives. For example, you can use X or Y or even A or B which are generally not assigned.

About Editorial Staff

Editorial Staff at WebNots are team of experts who love to build websites, find tech hacks and share the learning with community.

You also might be interested in

Top 6 Weebly Website Builder Alternatives

We are in the website building field for the past[...]

How to Create Bootable USB Drive for Mac?

There are various ways to boot macOS. Aside from using[...]

How to Find Windows Virtual Machine Size in Parallels Desktop for Mac?

Using Parallels app is one of the easiest ways to[...]

DOWNLOAD EBOOKS

• SEO Guide for Beginners
• WordPress SEO PDF Guide
• Weebly SEO PDF Guide
• Alt Code Emoji Shortcuts PDF
• Free ALT Code Shortcuts PDF
• View All eBooks

TRENDING TECH ARTICLES

• 600+ Windows Alt Codes for Symbols
• Fix Chrome Resolving Host Problem
• Fix Slow Page Loading Issue in Google Chrome
• View Webpage Source CSS and HTML in Google Chrome
• Fix Safari Slow Loading Pages in macOS
• Fix Windows WiFi Connection Issue
• ROYGBIV or VIBGYOR Rainbow Color Codes
• Fix I’m Not A Robot reCAPTCHA Issue in Google Search
• Structure of HTTP Request and Response

POPULAR WEB TUTORIALS

• Move WordPress Localhost Site to Live Server
• Move Live WordPress Site to Localhost
• Move WordPress Media Folder to Subdomain
• Fix WooCommerce Ajax Loading Issue
• Create a Free Weebly Blog
• Edit Weebly Source Code HTML and CSS
• Add Scroll To Top Button in Weebly
• Add Table in Weebly Site
• How to Add Advanced Data Table Widget in Weebly?
• Up to $500 Free Google Ads Coupon Codes

FREE SEO TOOLS

• Webpage Source Code Viewer
• HTTP Header Checker
• What is My IP Address?
• Google Cache Checker
• Domain Age Checker Tool
• View All Free Web and SEO Tools

© 2024 · WebNots · All Rights Reserved.

Type and press Enter to search

• Drivers & Downloads
• Log in New Customer? Register here

Additional Resources

Notification.

How-To Geek

How to assign a persistent drive letter to a usb drive in windows.

Your changes have been saved

Email is sent

Email has already been sent

Please verify your email address.

You’ve reached your account maximum for followed topics.

If you use multiple USB drives, you've probably noticed that the drive letter can be different each time you plug one in. If you'd like to assign a static letter to a drive that's the same every time you plug it in, read on.

Windows assigns drive letters to whatever type of drive is available---floppies, internal hard disks, optical drives, SD cards, and external USB drives. This can be annoying---especially if you use backup tools  or portable apps that prefer to have the same drive letter every time.

Related: What Is a "Portable" App, and Why Does It Matter?

To work with drive letters, you'll use the Disk Management tool built into Windows. In Windows 7, 8, or 10, click Start, type "create and format," and then click "Create and format hard disk partitions." Don't worry. You're not going to be formatting or creating anything. That's just the Start menu entry for the Disk Management tool. This procedure works the same in pretty much any version of Windows (though in Windows XP and Vista, you'd need to launch Disk Management through the Administrative Tools item in the Control Panel).

Windows will scan and then display all the drives connected to your PC in the Disk Management window. Right-click the USB drive to which you want to assign a persistent drive letter and then click "Change Drive Letter and Paths."

The "Change Drive Letter and Paths" window the selected drive's current drive letter. To change the drive letter, click "Change."

In the "Change Drive Letter or Path" window that opens, make sure the "Assign the following drive letter" option is selected and then use the drop-down menu to select a new drive letter. When you're done, click "OK."

NOTE: We suggest picking a drive letter between M and Z, because earlier drive letters may still get assigned to drives that don't always show up in File Explorer---like optical and removable card drives. M through Z are almost never used on most Windows systems.

Windows will display a warning letting you know that some apps might rely on drive letters to run properly. For the most part, you won't have to worry about this. But if you do have any apps in which you've specified another drive letter for this drive, you may need to change them. Click "Yes" to continue.

Back in the main Disk Management window, you should see the new drive letter assigned to the drive. You can now close the Disk Management window.

From now on, when you disconnect and reconnect the drive, that new drive letter should persist. You can also now use fixed paths for that drive in apps---such as back up apps---that may require them.

How to Assign a Drive Letter in Windows 11: A Step-by-Step Guide

September 10, 2024

Michael Collins

How to Assign a Drive Letter in Windows 11

Assigning a drive letter in Windows 11 is a simple process that can be done through the Disk Management tool. First, open Disk Management, find the drive you want to assign or change the letter for, right-click on it, and choose "Change Drive Letter and Paths." Then, select "Add" or "Change" and pick a new letter from the dropdown menu. Click "OK," and you’re done!

In this section, we’ll go through the steps to assign a drive letter in Windows 11, so you can easily identify and access your drives.

Step 1: Open Disk Management

First, press the Windows key + X and select "Disk Management" from the menu.

Disk Management is your go-to place for all things related to your drives. It lets you partition, format, and of course, assign drive letters.

Step 2: Locate the Drive

Next, find the drive for which you want to assign or change the letter.

Take your time to identify the right drive. It’s usually displayed by its size and current letter (if it has one). Double-check to avoid mistakes.

Step 3: Right-click the Drive

Right-click on the drive and choose "Change Drive Letter and Paths."

This will open a new window where you can add, change, or remove the drive letter.

Step 4: Select "Add" or "Change"

Choose "Add" if the drive doesn’t have a letter, or "Change" if it does.

If you’re adding a letter, you’ll be prompted to pick one. If you’re changing it, you’ll see the current letter and can choose a new one.

Step 5: Pick a New Letter

Select a new letter from the dropdown menu and click "OK."

Make sure to choose a letter that’s not already in use. Letters A-Z are available, but avoid A and B as they are traditionally reserved for floppy drives.

Step 6: Confirm Your Choice

Finally, click "Yes" when prompted to confirm your choice.

This step makes the change official. Your drive now has a new letter, making it easier to find.

After completing these steps, your selected drive will appear under the new letter in File Explorer. You’ll be able to access it just like any other drive on your system.

Tips for Assigning a Drive Letter in Windows 11

• Always back up data before making any changes to your drives.
• Avoid using letters A and B as they are reserved for legacy devices.
• If you’re assigning letters to multiple drives, keep it consistent for easy identification.
• External drives can have their letters changed too. Just follow the same steps.
• If you get an error, ensure you have administrative privileges on your Windows account.

Frequently Asked Questions

Can i use any letter for my drive.

You can use most letters from A-Z, but it’s best to avoid A and B as they are reserved for older devices like floppy drives.

Will assigning a new drive letter affect my data?

No, changing a drive letter won’t affect the data stored on the drive. However, software that references the old drive letter might need to be updated.

What if the letter I want is already used?

If the letter you want is in use, you’ll need to change the letter of the drive that’s currently using it before you can assign it to another drive.

Can I change the drive letter of my system drive?

It’s not recommended to change the drive letter of your system (C:) drive as it could cause your system to become unstable or fail to boot.

Do I need administrative rights to change a drive letter?

Yes, you need administrative privileges to change a drive letter in Windows 11.

• Open Disk Management.
• Locate the Drive.
• Right-click the Drive.
• Select "Add" or "Change."
• Pick a New Letter.
• Confirm Your Choice.

Assigning a drive letter in Windows 11 is a straightforward task that can save you a lot of time and hassle in the long run. It allows you to customize how you access your drives, making your workflow smoother and more intuitive. Whether you’re organizing multiple drives or simply want a more logical system, assigning drive letters is a small step that can make a big difference.

If you found this guide helpful, be sure to explore other Windows 11 features and tips. There’s a wealth of options to tailor the operating system to suit your needs better. So go ahead, dive into Disk Management, and start making Windows 11 truly yours. Happy computing!

Related posts:

• How to Change Drive Letter Windows 11: A Step-by-Step Guide
• How to Change Drive Letter in Windows 11: A Step-by-Step Guide
• How to Open Disk Management in Windows 11: A Step-by-Step Guide
• How to Get to Disk Management in Windows 11: A Step-by-Step Guide
• How to Dial Letters During a Phone Call on iPhone: A Step-by-Step Guide
• How to Activate Hard Drive Windows 11: A Comprehensive Step-by-Step Guide
• How to Divide Disk Space in Windows 11: A Step-by-Step Guide
• How to Partition Disk in Windows 11: A Step-by-Step Guide for Beginners
• How to Create Disk Partition in Windows 11: Step-by-Step Guide for Beginners
• How to Put an Accent Over a Letter on Mac – A Step-by-Step Guide
• How to Setup RAID 0 Windows 11: Step-by-Step Guide for Beginners

Windows Tip: Assign Permanent Letters to Removable Drives

Each time you plug in a USB drive or SD card in a PC, Windows gives it a dynamic alphabetic letter. Here’s how to give your drive(s) a permanent letter.

Windows will assign drive letters to external flash drives, SD cards, and other removable storage devices dynamically as you plug them in. If you use many different external storage devices throughout the day, having different letters assigned each time can become annoying and make things feel unorganized. Here’s how to assign permanent letters to each device to make things easier.

Add Permanent Drive Letters to Removeable Storage

Windows progresses through the alphabet (sans A and B) to assign drive letters to devices as you plug them in. So if you plug in a USB flash drive to get data from it, it might be F: but the next time you plug it in, it might be E: or G: depending on the order you plug them in.

The neat thing is you can assign a permanent letter to a USB drive directly with Windows 7, 8.1, and Windows 10. It’s an easy process, and there’s no need to install any third-party utility.

Assign a Specific Drive Letter in Windows

1. To set this up, plug in the drive that you want to assign a permanent letter. Then open the Run dialog ( Windows Key+R ) and type:  compmgmt.msc and hit Enter or click OK.

Or, right-click the Start button to bring up the hidden quick access menu in Windows 10 or 8.1 and select Computer Management .

2. Once that’s open, choose Disk Management in the left pane under Storage. It will take a few seconds while Windows looks for the drives currently connected to your PC and displays them in the right pane.

3. Right-click the drive you want to assign a permanent letter to and then choose Change Drive Letter and Paths from the menu.

4. A dialog box will open up, and here you need to click the Change button. Then make sure that Assign the following drive letter is selected and choose the letter you want to give it. Click OK and close out of Computer Management.

Now, each time you plug that drive into your PC, it will register with the drive letter you gave it.

39 Comments

March 31, 2016 at 7:33 am

This IS NOT permanent. Windows will still change them randomly. Again I repeat THIS IS NOT PERMANENT

April 27, 2016 at 4:41 am

this tutorial is rubbish. i have done this many times, windows still changes the drive letter. this is not permament at all!!!

May 14, 2016 at 5:20 am

Same experience as the other two users. I had changed my drive letter for a USB drive through disk management and it was working great for quite some time when suddenly today the drive letter was changed.

What I did notice is I had my e-reader connected before I turned on the USB drive (which had the letter assigned). Suddenly my e-reader has the assigned letter from the USB drive.

So… NOT PERMANENT AT ALL unless you turn on your drive with the “permanent letter” first.

Kumar Abhirup

May 31, 2016 at 4:52 am

Thanx, this helped me a lot.

August 30, 2022 at 10:27 am

For a while …

September 13, 2016 at 6:21 am

Nope. Windows 10 changes it if I plug in a different usb drive first.

October 8, 2016 at 12:29 am

This doesn’t work at all. You can change the drive letter from there, but if you unplug your unit and plug another one, windows will assign the previous letter to the new unit nonetheless. This is so annoying.

Pablo Guerrero

December 10, 2016 at 10:08 am

I usually have to use the Disk Management utility to correct the mess that Windows makes with drive letters. The most annoying thing is that Windows even changes the drive letters of those external disks that haven’t been unplugged.

Plugged to my laptop I always have an external diskdrive that always should be E: But if I have a SD card inserted in the SD drive and boot up the computer then the SD card is assigned E: and the always plugged (never unplugged) diskdrive is re-assigned as G: which is annoying since I have an application that looks for its overlays and databases on drive E:

Is there a way to say Windows that a used drive letter (like E:) is not available for dynamic drive letter assignment?

February 21, 2017 at 4:13 pm

Try assigning a letter well away from ABCDEF, like Z. This way windows won’t automatically reassign your letter when more drives are connected.

Steve Krause

February 22, 2017 at 10:38 am

Exactly what I do Will. Great tip.

Brian Burgess

May 2, 2017 at 8:00 pm

This is a great point, Will. I’ll upgrade the article to include your tip. Thanks!

July 8, 2017 at 12:47 am

It worked for a while. Then letters were changed after some days… again! :-(

April 29, 2024 at 7:39 am

That doesn’t work either.

MyTechMaster

March 1, 2017 at 4:47 pm

What Will says is true. If you assign the last letters of the alphabet to your external drives Windows will ALWAYS REMEMBER AND NEVER OVERWRITE THEM. Just don’t assign two of your external drives the same drive letter and this will work 100% of the time for you. Peace!

September 14, 2021 at 3:18 pm

((( NYM ))) after 30 years, still solving the world’s problems! another perfect answer. worked grrrrrreat! thank you my dear! see you in one of your forums helping folks soon! thank you thank you❗❗❗❗ zack

Sandy Lemberg

September 14, 2021 at 6:39 pm

Unless you have more than 26 external drives.

March 19, 2017 at 8:12 am

It is too late to assign a drive letter near the end of the alphabet. I have done a lot of work that uses drive letter E: I would have to redo all of this to change it to Z:

Surely, Microsoft would have a tool to assign drives permanently.

May 10, 2017 at 6:51 am

John, change your other drives to z,y,x, etc. then when the PC boots or you insert another drive/flash, it will be at the end and not take your E: drives spot.

April 1, 2017 at 9:23 am

With all the cracks in Windows I don’t see why there isn’t another “standard” OS that’s just as easy (or easier) and plug-n-play, that actually uses “memory” to remember stuff like drive letters. Or window size and placement. Or “Yes I’m sure” and “Yes I did click on ‘yes i’m sure'” and “No, I’m not a Robot…you are” and not to ask me to not ever show something again, every time…etc.

June 25, 2017 at 4:43 am

There is a shareware application which addresses this, though it’s intended for computer engineers and system administrators, not regular users. You can configure it to map drive letters according to DeviceIDs and other really permanent data. It runs as a service, to it autostarts with Windows. However, there’s no graphical interface. Everything has to be coded on an INI file, which is highly technical.

The software is called USBDLM is it’s free for private and educational uses. It’s available at Softpedia and other software archives.

July 7, 2017 at 8:25 am

The first 2 replies here are annoying. This works 100% unless you have gone and relettered multiple devices to the same letter. In that event only 1 (one) of the devices will acquire the desired letter and always the first. When the second device is plugged in Windows sees that the desired letter is use and uses the next available letter. You cannot give 2 devices the same letter, ever. Get over it.

Sheesh. I despise idiots.

If you’re using flash drives, think about reassigning them to A or B; these letters are still available and never used because no one has a floppy drive anymore. This way they can never get in the way of a letter you desire for an external drive.

For the idiot who programmed access to a database on an external drive, something that should never be done precisely because of drive letter changes, you either need to make sure the external drive is always assigned that letter or mount the drive into an empty NTFS folder to eliminate drive letter access. The only other thing you can do is manually assign a letter to the SD drive so it doesn’t take your precious E.

Computers should be more like cars and require an operator’s license, there’d be so many less morons trying to use a computer.

July 8, 2017 at 12:53 am

Some people at this forum really need a sex life, learning some manners, or probably both.

Noway Nohow

November 30, 2017 at 7:23 am

Hey Annoyed, your communication skills are annoying. Your tack is repugnant unless that is who you are as you go through life. Also, having a mobile drive that is being plugged into different employee’s computers does not make it practical to assign it under the user’s NTFS folder – especially if ACL’s are used for data security. One never sounds professional when they’re yelling/insulting.

July 7, 2020 at 10:33 am

This is why they invented File Servers, and NAS. Anyone you allow on your network can access, permissions always the same. Mobile hard drives are subject to Shaking, Shocking, Possibly dropping, and possibly locking.

Tact* and once upon a time it was understood that highly technical people have put most of their education and self-education into making their computer work instead of making people feel good about the way that we talk.

Annoyed set his name to Annoyed for good reason. It’s blatantly obvious to anyone willing to peruse that 6 out of the first 7 commentators DID NOT READ THE ARTICLE, in which the author specifically explains that drives like E:\ and F:\ will get rewritten as part of windows norm so you should “Permanently” set on letters far away from those so they don’t get reset:: ” When assigning your drive letter, make sure to choose a letter toward the end of the alphabet list. For example, X, Y, or Z — otherwise Windows has the tendency to eventually assign a different letter. Also, keep in mind that it will only be the assigned letter on the computer you changed it on. If you take your external drive to a different PC, Windows will give it a different dynamic letter. ” – The article you should have just read.

Being annoyed about people using computers badly is valid. Some of us work really hard to be professional and do things by best-practice so that solutions work long-term and no one has to guess at the state.

Then you read an article like this where most of the comments did not even bother to read the main text before complaining, and everyone else is doing backwoods duck-tape solutions.

ALSO WTF happened to the internet where now we’re all supposed to sound professional?

September 11, 2021 at 6:35 am

Finally I too fought this for years on many machines that I work on and finally I decided I would try this::::::: I decided I would go into safe mode and as administrator allocate a certain letter Z or x or y for these external SSD drives that I have to work with and then I rebooted and it never ever ever ever came back .

that was the solution I did a couple years ago and I’ve done it to all the machines I work on since and it’s perfect. Forever gone.

July 18, 2017 at 6:38 am

Thanks so much for the clear instructions.

August 3, 2017 at 6:58 am

This seems to work for me. I’ve assigned permanent letters a while ago and so far they’re not changing. I did assign only one of the four drives a letter towards the end of the alphabet, but the others are from A to E. Also, I gave each of the drives unique names.

August 21, 2017 at 4:22 am

I have three computers and three USB HDs. On each computer I have assigned these drives (for historical reasons) the letters G:, M: and O: respectively. D: is a partition on the internal HD and E: is the optical disc burner, so if I plug in any other USB device it usually comes up as F:. I find that these drive assignments stick . . . most of the time! Very occasionally one of the USB HDs comes up as F:. There appears to be no rhyme nor reason; but, hey!, it’s Windows, isn’t it, so that’s no real surprise. I just have to go into Disk Management to change it back and it usually behaves itself well for the next few weeks or months. Nothing, really, to get hot under the collar about.

September 14, 2021 at 2:11 am

That is exactly my experience, except I also have P and Q drives. I assigned these letters at a time when I had a multiple card reader occupying drive letters H to L. Goodness knows why the G drive occasionally gets reassigned as F, but it happens so infrequently that it’s no real inconvenience.

November 22, 2017 at 12:04 pm

Change drive letter is grayed out on my system. I am an administrator on the PC

Edward Bear

November 22, 2017 at 4:30 pm

You can use the command line program diskpart to change the driver letter: 1. open command prompt 2. type “diskpart” (in these instructions do not type the quotation marks), press Enter 3. type “list volumes” , press Enter 4. identify the volume number associated with the drive whose letter you wish to change – assume this is volume “N” 5. type “select volume N” (replacing N with appropriate volume number) then press Enter 6. type “assign letter=L” (replacing L with the appropriate new drive letter) then press Enter 7. type “exit” then press Enter to close diskpart and return to command prompt.

August 30, 2018 at 2:33 am

This works fine for me, even if changing Drive Letter is greyed out by our IT

January 7, 2018 at 4:20 am

You never said what to do if its when you try to change it its grayed out. I cant give it a letter. What do I do?

March 24, 2018 at 8:56 pm

Jay, when a drive letter is grayed out, it has already been assigned to another drive. Find out which drive has the letter you want to use and then change it’s letter to Z. This will free up the old drive letter and it will no longer be grayed out.

March 24, 2018 at 8:42 pm

This annoying problem could easily be avoided if the whole concept of drive letters was abandoned. Each drive should have a distinctive drive name (or number) assigned by the user. Drives should then optionally be listed alphabetically or numerically by Windows. I don’t know who started this drive A:\, B:\, C:\, etc. concept but in today’s computing world, it’s obsolete and unnecessary. As it stands now, you can choose to not assign a drive letter during formatting but if you do that, they will not list when you click “This Computer”. It makes you wonder what they are smoking.

March 30, 2019 at 5:39 am

Would really like to know how to assign a drive letter PER DEVICE, please

example. (this) thumb is always K (this thumb drive) is always L.

not the drive slot itself, but device.

January 27, 2021 at 6:05 pm

For years I’ve been using A: for my built-in SD Card reader, and E: through K: for specific external hard drives and specific thumb drives. I went through computer management to set all that up and it worked for years. For reasons that I cannot work out, my SD Card reader is automatically assigned E: whenever I put in any SD card, including the exact same SD card and/or reboot my computer. Even when I change the drive letter on the SD Card reader back to A: and reboot my computer, the drive letter is once again reset to E: by the computer even when there are no other drives of any kind attached to the computer before or after attempting to assign the SD Card reader to A:. I’ve since tried updating all the drivers, a couple of which have updated, and the problem persists. While I have upgraded one of my external drives recently, I cannot see how that would cause the problem especially since it is not the first time that I’ve replaced an external drive and assigned the new drive to the drive letter of the drive it replaced. I am not running any new software, so as far as I can tell it isn’t a software conflict. My system is set up such that the drive letters I have been assigning need to remain what I assigned them. (I’ve already assigned my DVD-ROM drive to Z:, and even that isn’t working properly now.) Once up a time using Computer Management might have “permanently” reassigned the drive letters, since 1/25/2020 that is apparently no longer the case. I need to find another solution that works.

Being old school and having started out on DOS computers with 5.25″ floppy drives, the lettering of the drives is not a problem to me in and of itself, and it makes no particular difference to me if the lettering of drives is ultimately done away with, but until that time we must work with the tools we have. So any help would be appreciated in resolving this.

June 13, 2023 at 8:40 am

At this moment I have the same problem with two USB drives installed in my router. Suddenly the original assigned letters changed and that played havoc in my desktops, laptops, tablets and smartphones.

I agree with protesters. The letter assigning system is obsolete and it seems to me that nobody cares. Ok, let’s accept that A,B,C,D is used by the OS, but why not also use proper names for removable devices, let say movies, music1, music2, personal-letters or whatever. Of course if you assign the same name to two different USB drives that’s your problem.

June 21, 2023 at 1:54 pm

I do not have this problem.

1. Use high up letters — not D, E, etc, but P, Q, etc.

2. If you get an unwanted change, use Disk Management to change back

3 Use Windows 7. Who knows what Windows 10 or 11 will try to do to your system.

Your email address will not be published. Required fields are marked *

  Save my name and email and send me emails as new comments are made to this post.

Recommended for you