how do you start a case study introduction

Blog about Writing Case Study and Coursework

dudestudy.com

How to Write an Introduction for a Case Study Report

If you’re looking for examples of how to write an introduction for a case-study report, you’ve come to the right place. Here you’ll find a sample, guidelines for writing a case-study introduction, and tips on how to make it clear. In five minutes or less, recruiters will read your case study and decide whether you’re a good fit for the job.

Example of a case study introduction

An example of a case study introduction should be written to provide a roadmap for the reader. It should briefly summarize the topic, identify the problem, and discuss its significance. It should include previous case studies and summarize the literature review. In addition, it should include the purpose of the study, and the issues that it addresses. Using this example as a guideline, writers can make their case study introductions. Here are some tips:

The first paragraph of the introduction should summarize the entire article, and should include the following sections: the case presentation, the examinations performed, and the working diagnosis, the management of the case, and the outcome. The final section, the discussion, should summarize the previous subsections, explain any apparent inconsistencies, and describe the lessons learned. The body of the paper should also summarize the introduction and include any notes for the instructor.

The last section of a case study introduction should summarize the findings and limitations of the study, as well as suggestions for further research. The conclusion section should restate the thesis and main findings of the case study. The conclusion should summarize previous case studies, summarize the findings, and highlight the possibilities for future study. It is important to note that not all educational institutions require the case study analysis format, so it is important to check ahead of time.

The introductory paragraph should outline the overall strategy for the study. It should also describe the short-term and long-term goals of the case study. Using this method will ensure clarity and reduce misunderstandings. However, it is important to consider the end goal. After all, the objective is to communicate the benefits of the product. And, the solution should be measurable. This can be done by highlighting the benefits and minimizing the negatives.

Structure of a case study introduction

The structure of a case study introduction is different from the general introduction of a research paper. The main purpose of the introduction is to set the stage for the rest of the case study. The problem statement must be short and precise to convey the main point of the study. Then, the introduction should summarize the literature review and present the previous case studies that have dealt with the topic. The introduction should end with a thesis statement.

The thesis statement should contain facts and evidence related to the topic. Include the method used, the findings, and discussion. The solution section should describe specific strategies for solving the problem. It should conclude with a call to action for the reader. When using quotations, be sure to cite them properly. The thesis statement must include the problem statement, the methods used, and the expected outcome of the study. The conclusion section should state the case study’s importance.

In the discussion section, state the limitations of the study and explain why they are not significant. In addition, mention any questions unanswered and issues that the study was unable to address. For more information, check out the APA, Harvard, Chicago, and MLA citation styles. Once you know how to structure a case study introduction, you’ll be ready to write it! And remember, there’s always a right and wrong way to write a case study introduction.

During the writing process, you’ll need to make notes on the problems and issues of the case. Write down any ideas and directions that come to mind. Avoid writing neatly. It may impede your creative process, so write down a rough draft first, and then draw it up for your educational instructor. The introduction is an overview of the case study. Include the thesis statement. If you’re writing a case study for an assignment, you’ll also need to provide an overview of the assignment.

Guidelines for writing a case study introduction

A case study is not a formal scientific research report, but it is written for a lay audience. It should be readable and follow the general narrative that was determined in the first step. The introduction should provide background information about the case and its main topic. It should be short, but should introduce the topic and explain its context in just one or two paragraphs. An ideal case study introduction is between three and five sentences.

The case study must be well-designed and logical. It cannot contain opinions or assumptions. The research question must be a logical conclusion based on the findings. This can be done through a spreadsheet program or by consulting a linguistics expert. Once you have identified the major issues, you need to revise the paper. Once you have revised it twice, it should be well-written, concise, and logical.

The conclusion should state the findings, explain their significance, and summarize the main points. The conclusion should move from the detailed to the general level of consideration. The conclusion should also briefly state the limitations of the case study and point out the need for further research in order to fully address the problem. This should be done in a manner that will keep the reader interested in reading the paper. It should be clear about what the case study found and what it means for the research community.

The case study begins with a cover page and an executive summary, depending on your professor’s instructions. It’s important to remember that this is not a mandatory element of the case study. Instead, the executive summary should be brief and include the key points of the study’s analysis. It should be written as if an executive would read it on the run. Ultimately, the executive summary should include all the key points of the case study.

Clarity in a case study introduction

Clarity in a case study introduction should be at the heart of the paper. This section should explain why the case was chosen and how you decided to use it. The case study introduction varies according to the type of subject you are studying and the goals of the study. Here are some examples of clear and effective case study introductions. Read on to find out how to write a successful one. Clarity in a case study introduction begins with a strong thesis statement and ends with a compelling conclusion.

The conclusion of the case study should restate the research question and emphasize its importance. Identify and restate the key findings and describe how they address the research question. If the case study has limitations, discuss the potential for further research. In addition, document the limitations of the case study. Include any limitations of the case study in the conclusion. This will allow readers to make informed decisions about whether or not the findings are relevant to their own practices.

A case study introduction should include a brief discussion of the topic and selected case. It should explain how the study fits into current knowledge. A reader may question the validity of the analysis if it fails to consider all possible outcomes. For example, a case study on railroad crossings may fail to document the obvious outcome of improving the signage at these intersections. Another example would be a study that failed to document the impact of warning signs and speed limits on railroad crossings.

As a conclusion, the case study should also contain a discussion of how the research was conducted. While it may be a case study, the results are not necessarily applicable to other situations. In addition to describing how a solution has solved the problem, a case study should also discuss the causes of the problem. A case study should be based on real data and information. If the case study is not valid, it will not be a good fit for the audience.

Sample of a case study introduction

A good case study introduction serves as a map for the reader to follow. It should identify the research problem and discuss its significance. It should be based on extensive research and should incorporate relevant issues and facts. For example, it may include a short but precise problem statement. The next section of the introduction should include a description of the solution. The final part of the introduction should conclude with the recommended action. Once the reader has a sense of the direction the study will take, they will feel confident in pursuing the study further.

In the case of social sciences, case studies cannot be purely empirical. The results of a case study can be compared with those of other studies, so that the case study’s findings can be assessed against previous research. A case study’s results can help support general conclusions and build theories, while their practical value lies in generating hypotheses. Despite their utility, case studies often contain a bias toward verification and tend to confirm the researcher’s preconceived notions.

In the case of case studies, the conclusions section should state the significance of the findings, stating how the findings of the study differ from other previous studies. Likewise, the conclusion section should summarize the key findings, and make the reader understand how they address the research problem. In the case of a case study, it is crucial to document any limitations that have been identified. After all, a case study is not complete without further research.

After the introduction, the main body of the paper is the case presentation. It should provide information about the case, such as the history, examination results, working diagnosis, management, and outcome. It should conclude with a discussion, explaining the correlations, apparent inconsistencies, and lessons learned. Finally, the conclusion should state whether the case study presented the results in the desired way. The findings should not be overgeneralized, and the conclusions must be derived from this information.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

How to Write a Case Study: A Complete Guide with Templates

Writing compelling and insightful case studies is a marketer’s biggest job, yet most get frustrated with this content. The challenge? Figuring out how to write a case study that not only highlights the company’s strongest suit but engages new clients with strategic information. If you often struggle with making case studies as more than just dry facts and figures, you’re leading your efforts to missed opportunities.

How to Write a Case Study Step-by-Step 

• Craft a Compelling Headline: Highlight the main success with a clear, direct title.
• Start with a Strong Introduction: Provide a broad overview and hook the reader.
• Discuss Unique Client Challenges: Highlight specific industry-related challenges.
• Highlight the Solution: Showcase your strategies and key results.
• Present Quantifiable Results: Use data and visuals to demonstrate impact.
• Be Clear and Concise: Stick to the point and support claims with data.
• Treat Your Case Study Like a Story: Focus on the customer’s journey and success.
• Use Direct Quotes from the Client: Add authenticity with client testimonials.
• Make the Key Takeaway Clear: Reinforce your expertise and the solution’s value.
• Include a Call to Action (CTA): Guide the reader on what to do next.
• Make It Readable: Use simple language, short paragraphs, and bullet points.
• Finalize and Proofread: Review for errors and ensure a smooth flow.

In this blog, you’ll discover a step-by-step guide that simplifies the process, making it easier to create interesting case studies. From planning to writing, I’ve got you covered. So, let’s start with some basics. 

Table of Contents

What is the format of a case study.

• How to Plan a Case Study 

How to Write a Case Study

How to summarize a case study, how to cite a case study.

A well-structured case study isn’t just a collection of facts—it’s a powerful marketing tool that tells a compelling story. Using the right format for a case study ensures that your message is clear, engaging, and impactful. 

The proper format guides readers through the narrative with hierarchy and scannability, helping them connect with your brand on a deeper level. Most importantly, it empowers you as a marketer to set clear goals for presenting your case studies and ensures you deliver the correct information effectively!

Case studies format helps you to plan and write the case study for your clients. With this outline in mind, you can create steps to complete the process of writing and publishing your case study research. There are eight components of a case study that are essential for building a layout of information in the correct order that makes sense to the viewers. 

Start with a catchy “Title” that grabs attention and an “Overview” that sets the stage. Clearly define the “Problem” your client faced, and then showcase your “Solution” in detail. Highlight the success with “Results” that are measurable and impactful. Add authenticity with “Testimonials and Quotes” from satisfied clients. Wrap it up with a firm “Conclusion” and a compelling “Call to Action” in the “About Us” section that guides the reader on what to do next. 

By following this format, you create a case study design that resonates with your audience and effectively showcases your brand’s value.

Check out the marketing case study template I’ve included below—it has a clear outline that makes it easy to see how sticking to a format can help you plan and write the entire thing.

How to Plan a Case Study 

Now comes the big part! Understanding what to include in a case study outline is just the starting point for beginners. The real challenge lies in creating a step-by-step plan to craft that outline and filling it in with the right information!

1. Set Clear Goals for Your Case Study

Before diving into how to write a case study, defining your ultimate objective is essential. Think about it—what do you want your audience to take away from this case study? For example, your goal is to showcase how your SEO strategies boosted a client’s organic traffic by 150% in just six months. This clear goal will shape your entire narrative and ensure that your case study is laser-focused on demonstrating your expertise and the value you bring.

2. Select a Client that Highlights Your Strongest Suit

Choosing the right client or subject is vital while creating case studies. Imagine you’ve worked with a small e-commerce brand struggling to rank for competitive keywords. Your strategies helped them rank on the first page and increase conversions. This is the perfect client for your case study because their success story directly showcases your SEO prowess. 

By picking a client whose experience aligns with your goals, you’ll create a case study that resonates with your target audience.

3. Reach Out to Your Client for Collaboration

Now that you’ve identified the ideal client, it’s time to reach out. Let’s say you contact your client and explain how a case study can highlight their remarkable success story. It’s a great way to spotlight a mutual collaboration based on credibility. Their buy-in is crucial; their insights and data will authenticate your case study.

4. Gather Comprehensive Data and Insights

Data is the lifeblood of any compelling case study. For instance, in your SEO case study, you’ll need to gather data on key metrics like keyword rankings, organic traffic, and conversion rates before and after implementing your strategies. Let’s say your client saw a 50% increase in organic traffic within three months of optimizing their website. Collecting this data will help you build a robust, evidence-based narrative highlighting your impact.

It’s essential to monitor the before-and-after data to track the effectiveness of implementing your strategies. 

5. Prepare Insightful Questions and Conduct Interviews

It would be best to ask the right questions to get the most out of your client interviews. Imagine asking your client, “What specific challenges were you facing with your organic search rankings before we started working together?” or “How did our SEO strategies help you achieve your business goals?” These questions will lead to detailed responses that add depth to your case study, making it more than just numbers on a page.

Always ask questions that uncover the key challenges your clients face. This way, your prospects will know when to turn to you to navigate or overcome similar obstacles in their business.

Since I’m giving an example of an SEO case study in marketing, you can try these questions to interview your existing client. Obviously, you can modify the sentences according to your industry basics, but these types of questions are fundamental for collecting structured data from your clients. 

• What were your business’s main SEO challenges before we started working together?
• Can you describe your initial expectations for implementing our SEO strategies?
• What specific SEO tactics did we implement that you found most effective?
• How did you monitor and measure the impact of these strategies on your organic traffic?
• What were the key metrics or results that stood out to you after the first three months?

6. Ask Questions That Drive the Story Forward

Impactful questions are the backbone of a strong case study. They allow you to highlight the unique value you delivered to your clients. You can effortlessly showcase your USPs within the case study by asking the right questions. 

Focus on inquiring about the effectiveness of your services and strategies, their impact, and which aspects of the solution were most beneficial. This insight will be your key to demonstrating the tangible benefits you offer your clients. 

Consider asking questions like:

• Can you share a moment when you first noticed a significant improvement in your website’s organic traffic?
• How did the increase in organic traffic impact other business areas, such as lead generation or sales?
• What feedback did your team or customers receive regarding the changes in your site’s performance?
• Looking back, what do you believe was the most critical factor in achieving these results?
• How has this success with SEO influenced your overall marketing strategy moving forward?

These types of questions encourage clients to share their experiences in a way that paints a vivid picture for your readers, making the case study more relatable and engaging.

7. Draft a Clear and Organized Outline

With all the data and insights gathered, it’s time to create a well-structured case study outline. Let’s say you start with a brief overview of your client’s business and its challenges, followed by a detailed account of the SEO strategies you implemented. Then, you showcase the results with hard data and close with client testimonials and a solid call to action. 

As mentioned above, organizing your content in a logical, easy-to-follow format will help you write a case study that not only informs but also captivates your audience.

These steps are the cornerstones of designing a case study. Once you complete this checklist, you can proceed to the next step, which is writing a case study. Since I discussed planning an SEO case study extensively, here is a case study template that perfectly illustrates the process. 

You want to create an informative case study for your prospects. But how do you make sure it’s done right? Here’s a step-by-step guide on how to write a case study that drives results.

1. Craft a Compelling Headline  

Your headline is the first thing readers see, so make it count! It should grab attention and hint at the success story you’re about to share.

How to Write a Case Study Title:

1. Highlight the Result: Showcase the critical success, like “Increased Sales by 200%.”

2. Be Clear and Direct: Make sure the headline is straightforward to grasp.

3. Use Action Words: Start with strong verbs like “How We” or “Achieved.”

4. Mention Client or Industry: Include relevant details for specificity.

5. Keep It Short: Make it concise and attention-grabbing.

2. Start with a Strong Introduction  

Kick off your case study with a broad overview that sets the stage. Provide the big picture and construct a clear narrative that draws readers in, making them eager to learn more about how you solved a significant challenge.

Look at the consulting case study template , which includes a stunning overview description and precise instructions for writing a short and compelling introduction. You can add every little detail to hook the reader.

Get This Template and More

3. Discuss Specific Challenges of Your Client

This is where your prospect can truly connect. By highlighting unique yet specific challenges to their industry, you give them insight into issues they might not have encountered yet—or ones they’ve already faced. This way, they’ll know exactly who to turn to when similar challenges arise.

The following financial case study template provides a brief flow of the company’s common challenges in the financial analysis process. The template is almost ready to use with this domain-specific content, requiring minimal adjustments to design your case study.

4. Highlight the Solution  

Now, dive into the heart of the story. Highlight the solution you provided, and make sure to include a notable achievement or key result. This is your chance to shine!

Check out the format for presenting the implications of your service on your client’s business. The benefits should be well-written and data-driven to convince your upcoming clients. This graphic design case study format helps you understand the specific impacts a company seeks from a reputable graphic design firm.

5. Present Quantifiable Results  

When sharing the outcome, numbers speak louder than words. Present quantifiable results that clearly demonstrate the impact of your solution. Use graphs or charts to make the data easy to digest and visually appealing.

6. Be Clear and Concise  

Less is more. Stick to the point and offer just the right amount of detail to keep your readers engaged. Include data that supports your claims, but avoid overwhelming them with too much information.

Here’s a stunning sales consulting case study that uses a simple case study layout and details written in readable, plain language to gauge more utility. 

7. Treat Your Case Study Like a Story  

Focus on your customer’s journey. Think of your case study as a story in which your client is the hero, and your solution is the tool that helped them succeed. This approach will make your case study relatable and compelling.

8. Be as Specific as Possible  

Don’t be vague—details matter. Mention the specific company and its industry to let your audience know that the challenge and solution are relevant to them. The more precise you are, the more credible and trustworthy your case study will be.

Check out the sample case study below for payroll accounting. The details are clearly organized and grouped to emphasize the type of case study.

Also, the next case study template displays very specific problems that a company faces when it lacks digital marketing expertise. 

These templates make it a breeze to craft a case study that’s perfect for your niche.

9. Use Direct Quotes from the Client  

Quotes from your client add authenticity and credibility. They give readers insight into the client’s perspective and make your case study more relatable. Plus, a glowing testimonial is always a nice touch!

The following inbound marketing case study has a prominent client testimonial. With the brief instructions on this template, it’s easier for you to understand how to capture the golden words of your client and use them as a word-of-mouth strategy within the case study. 

10. Pick an Interesting Angle  

Find a unique angle that makes your case study stand out. Maybe it’s an unexpected challenge you overcame, or perhaps it’s a particularly innovative solution. Whatever it is, make it intriguing.

11. Make the Key Takeaway Crystal Clear  

Your readers should walk away with a clear understanding of the main point of your case study. This takeaway should reinforce your expertise and the value of your solution.

12. Include a Call to Action (CTA)  

Don’t leave your readers hanging—tell them what to do next! Include a compelling summary about your company, showcase your happy client base, and conclude the journey with a strong CTA, whether to contact you for a consultation, download a related resource, or learn more about your services on social media, like the following case study template design.

12. Format Professionally  

The design of the case study is just as important as the content. A well-formatted, visually appealing document makes a great impression and enhances readability. With ready-to-use niche-oriented templates, you can easily create a professional-looking case study that impresses and converts. Here is an eye-catching template for an AI assistant software case study that displays a sleek and well-navigated format.

13. Make It Readable  

Easy readability is key. Use simple language, short paragraphs, and bullet points where appropriate. Your case study should be easy to scan and digest. Follow the thirteen design principles to create a standout piece that enhances your marketing efforts.

To understand this, take a look at the following consulting case study template. 

14. Finalize and Proofread Your Case Study  

In order to excel in how to write case studies, give your case study a final review before you hit publish. Proofread carefully to catch any typos or errors, and make sure everything flows smoothly. A polished case study reflects your attention to detail and professionalism.

To effectively summarize a case study, start by completing all sections, including the introduction, challenges, solutions, and results. This approach helps marketers identify key points to highlight, making it easier to craft a succinct and engaging summary. 

One tricky thing is the length of the case study summary. So, how long should a case study summary be? 

The length of a case study summary can vary depending on the details you’re covering. Generally, it should be kept concise, usually spanning a couple of lines or up to a single page with several paragraphs. If you’re crafting a customer case study and want to flex your storytelling muscles, it’s perfectly fine for the summary to stretch to a full page.

If summarizing a case study seems daunting, try DocHipo’s advanced AI Writer tool, which effortlessly creates a crisp and concise summary.

Watch this short video to use it.

This is the last step in writing a case study analysis. Citation in a case study is the practice of giving proper credit to the sources you reference or use in your research. It helps validate your work, shows the depth of your research, and avoids plagiarism. Follow the below steps to cite a case study:

• Identify the Source: Gather details like the author, title, publication year, and where the case study was published.
• Choose a Citation Style: Follow the specific formatting style (APA, MLA, Chicago, etc.) required for your work.
• Format the Citation: Arrange the details according to the chosen citation style.
• Include In-Text Citations: Place citations within the text or paragraphs for the case study.
• Create a References List: At the end of your case study, compile all your sources in a bibliography or reference list.

For case studies, citations in APA and MLA styles are very common. If you are just beginning, then you might be confused about these case study citation formats.

Hence, take a look at the picture below, which easily comprehends the APA vs MLA citation features. 

Still feeling overwhelmed about case studies? Be stress-free with the most convenient case study maker, which saves time and allows you to present data in the most attention-grabbing way. 

Watch the video to create case studies in minutes with DocHipo’s case study maker. 

Conclusion 

To summarize, if you want to write a case study, start with a proper case study format, plan the case study, and finally write it with all the information in hand. Then, write a summary to provide an overview of your case study, and finally, add citations for reference. 

Meanwhile, if you want to design a case study, Try DocHipo templates. Sign up to explore all the case study templates. 

What is the structure of a case study?

A case study typically includes the following sections: Title, Introduction, Background, Problem Statement, Solutions, Results, and Conclusion. Each section serves to tell a comprehensive story of the business, from the issue at hand to the resolution and outcomes.

What are the 5 essential elements of a great case study?

The 5 essential elements are: 1) Clear Objective, 2) Detailed Background, 3) Specific Challenges, 4) Effective Solutions, and 5) Measurable Results. These components provide a compelling narrative that highlights the value delivered.

How to begin a case study?

Start a case study by defining the purpose and scope of the study. Introduce the subject, outline the problem, and provide background information to give readers context. This sets the stage for the detailed analysis that follows.

How to make an introduction in case study?

To craft a compelling introduction, briefly describe the subject, outline the problem they faced, and explain why the study is relevant. This section should grab the reader’s attention and make them interested in the rest of the study.

How to make a business case study?

A business case study should begin with a clear objective and background information. Identify the problem, explain the solutions implemented, and conclude with the results achieved. Use real data and quotes from stakeholders to enhance credibility.

How to write a case study step by step?

To write a case study step by step, start by identifying the case you want to explore and gathering relevant data on the subject. Outline the structure of your case study, then craft an engaging Introduction to set the context. Next, detail the Background and Challenges faced, followed by the Solutions applied. Share the Results and Conclusion to highlight the impact. Finally, edit and proofread your case study to ensure clarity and accuracy.

Turn your ideas into beautiful design

No prior design skill required

Talk to Sales

Wherever you are on your Dochipo journey, you can always get in touch.

Talk to Support

How to Write a Case Study - All You Wanted to Know

What do you study in your college? If you are a psychology, sociology, or anthropology student, we bet you might be familiar with what a case study is. This research method is used to study a certain person, group, or situation. In this guide from our dissertation writing service , you will learn how to write a case study professionally, from researching to citing sources properly. Also, we will explore different types of case studies and show you examples — so that you won’t have any other questions left.

What Is a Case Study?

A case study is a subcategory of research design which investigates problems and offers solutions. Case studies can range from academic research studies to corporate promotional tools trying to sell an idea—their scope is quite vast.

What Is the Difference Between a Research Paper and a Case Study?

While research papers turn the reader’s attention to a certain problem, case studies go even further. Case study guidelines require students to pay attention to details, examining issues closely and in-depth using different research methods. For example, case studies may be used to examine court cases if you study Law, or a patient's health history if you study Medicine. Case studies are also used in Marketing, which are thorough, empirically supported analysis of a good or service's performance. Well-designed case studies can be valuable for prospective customers as they can identify and solve the potential customers pain point.

Case studies involve a lot of storytelling – they usually examine particular cases for a person or a group of people. This method of research is very helpful, as it is very practical and can give a lot of hands-on information. Most commonly, the length of the case study is about 500-900 words, which is much less than the length of an average research paper.

The structure of a case study is very similar to storytelling. It has a protagonist or main character, which in your case is actually a problem you are trying to solve. You can use the system of 3 Acts to make it a compelling story. It should have an introduction, rising action, a climax where transformation occurs, falling action, and a solution.

Here is a rough formula for you to use in your case study:

Problem (Act I): > Solution (Act II) > Result (Act III) > Conclusion.

Types of Case Studies

The purpose of a case study is to provide detailed reports on an event, an institution, a place, future customers, or pretty much anything. There are a few common types of case study, but the type depends on the topic. The following are the most common domains where case studies are needed:

• Historical case studies are great to learn from. Historical events have a multitude of source info offering different perspectives. There are always modern parallels where these perspectives can be applied, compared, and thoroughly analyzed.
• Problem-oriented case studies are usually used for solving problems. These are often assigned as theoretical situations where you need to immerse yourself in the situation to examine it. Imagine you’re working for a startup and you’ve just noticed a significant flaw in your product’s design. Before taking it to the senior manager, you want to do a comprehensive study on the issue and provide solutions. On a greater scale, problem-oriented case studies are a vital part of relevant socio-economic discussions.
• Cumulative case studies collect information and offer comparisons. In business, case studies are often used to tell people about the value of a product.
• Critical case studies explore the causes and effects of a certain case.
• Illustrative case studies describe certain events, investigating outcomes and lessons learned.

Need a compelling case study? EssayPro has got you covered. Our experts are ready to provide you with detailed, insightful case studies that capture the essence of real-world scenarios. Elevate your academic work with our professional assistance.

Case Study Format

The case study format is typically made up of eight parts:

• Executive Summary. Explain what you will examine in the case study. Write an overview of the field you’re researching. Make a thesis statement and sum up the results of your observation in a maximum of 2 sentences.
• Background. Provide background information and the most relevant facts. Isolate the issues.
• Case Evaluation. Isolate the sections of the study you want to focus on. In it, explain why something is working or is not working.
• Proposed Solutions. Offer realistic ways to solve what isn’t working or how to improve its current condition. Explain why these solutions work by offering testable evidence.
• Conclusion. Summarize the main points from the case evaluations and proposed solutions. 6. Recommendations. Talk about the strategy that you should choose. Explain why this choice is the most appropriate.
• Implementation. Explain how to put the specific strategies into action.
• References. Provide all the citations.

How to Write a Case Study

Let's discover how to write a case study.

Setting Up the Research

When writing a case study, remember that research should always come first. Reading many different sources and analyzing other points of view will help you come up with more creative solutions. You can also conduct an actual interview to thoroughly investigate the customer story that you'll need for your case study. Including all of the necessary research, writing a case study may take some time. The research process involves doing the following:

• Define your objective. Explain the reason why you’re presenting your subject. Figure out where you will feature your case study; whether it is written, on video, shown as an infographic, streamed as a podcast, etc.
• Determine who will be the right candidate for your case study. Get permission, quotes, and other features that will make your case study effective. Get in touch with your candidate to see if they approve of being part of your work. Study that candidate’s situation and note down what caused it.
• Identify which various consequences could result from the situation. Follow these guidelines on how to start a case study: surf the net to find some general information you might find useful.
• Make a list of credible sources and examine them. Seek out important facts and highlight problems. Always write down your ideas and make sure to brainstorm.
• Focus on several key issues – why they exist, and how they impact your research subject. Think of several unique solutions. Draw from class discussions, readings, and personal experience. When writing a case study, focus on the best solution and explore it in depth. After having all your research in place, writing a case study will be easy. You may first want to check the rubric and criteria of your assignment for the correct case study structure.

Read Also: ' WHAT IS A CREDIBLE SOURCES ?'

Although your instructor might be looking at slightly different criteria, every case study rubric essentially has the same standards. Your professor will want you to exhibit 8 different outcomes:

• Correctly identify the concepts, theories, and practices in the discipline.
• Identify the relevant theories and principles associated with the particular study.
• Evaluate legal and ethical principles and apply them to your decision-making.
• Recognize the global importance and contribution of your case.
• Construct a coherent summary and explanation of the study.
• Demonstrate analytical and critical-thinking skills.
• Explain the interrelationships between the environment and nature.
• Integrate theory and practice of the discipline within the analysis.

Need Case Study DONE FAST?

Pick a topic, tell us your requirements and get your paper on time.

Case Study Outline

Let's look at the structure of an outline based on the issue of the alcoholic addiction of 30 people.

Introduction

• Statement of the issue: Alcoholism is a disease rather than a weakness of character.
• Presentation of the problem: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there.
• Explanation of the terms: In the past, alcoholism was commonly referred to as alcohol dependence or alcohol addiction. Alcoholism is now the more severe stage of this addiction in the disorder spectrum.
• Hypotheses: Drinking in excess can lead to the use of other drugs.
• Importance of your story: How the information you present can help people with their addictions.
• Background of the story: Include an explanation of why you chose this topic.
• Presentation of analysis and data: Describe the criteria for choosing 30 candidates, the structure of the interview, and the outcomes.
• Strong argument 1: ex. X% of candidates dealing with anxiety and depression...
• Strong argument 2: ex. X amount of people started drinking by their mid-teens.
• Strong argument 3: ex. X% of respondents’ parents had issues with alcohol.
• Concluding statement: I have researched if alcoholism is a disease and found out that…
• Recommendations: Ways and actions for preventing alcohol use.

Writing a Case Study Draft

After you’ve done your case study research and written the outline, it’s time to focus on the draft. In a draft, you have to develop and write your case study by using: the data which you collected throughout the research, interviews, and the analysis processes that were undertaken. Follow these rules for the draft:

Use Data to Illustrate Key Points in Your Case Study

Even though your case study is a story, it should be based on evidence. Use as much data as possible to illustrate your point. Without the right data, your case study may appear weak and the readers may not be able to relate to your issue as much as they should. Let's see the examples from essay writing service :

‍ With data: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there. Without data: A lot of people suffer from alcoholism in the United States.

Try to include as many credible sources as possible. You may have terms or sources that could be hard for other cultures to understand. If this is the case, you should include them in the appendix or Notes for the Instructor or Professor.

Finalizing the Draft: Checklist

After you finish drafting your case study, polish it up by answering these ‘ask yourself’ questions and think about how to end your case study:

• Check that you follow the correct case study format, also in regards to text formatting.
• Check that your work is consistent with its referencing and citation style.
• Micro-editing — check for grammar and spelling issues.
• Macro-editing — does ‘the big picture’ come across to the reader? Is there enough raw data, such as real-life examples or personal experiences? Have you made your data collection process completely transparent? Does your analysis provide a clear conclusion, allowing for further research and practice?

Problems to avoid:

• Overgeneralization – Do not go into further research that deviates from the main problem.
• Failure to Document Limitations – Just as you have to clearly state the limitations of a general research study, you must describe the specific limitations inherent in the subject of analysis.
• Failure to Extrapolate All Possible Implications – Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings.

How to Create a Title Page and Cite a Case Study

Let's see how to create an awesome title page.

Your title page depends on the prescribed citation format. The title page should include:

• A title that attracts some attention and describes your study
• The title should have the words “case study” in it
• The title should range between 5-9 words in length
• Your name and contact information
• Your finished paper should be only 500 to 1,500 words in length.With this type of assignment, write effectively and avoid fluff

Here is a template for the APA and MLA format title page:

There are some cases when you need to cite someone else's study in your own one – therefore, you need to master how to cite a case study. A case study is like a research paper when it comes to citations. You can cite it like you cite a book, depending on what style you need.

Citation Example in MLA ‍ Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies. Boston: Harvard Business Publishing, 2008. Print.

Citation Example in APA ‍ Hill, L., Khanna, T., & Stecker, E. A. (2008). HCL Technologies. Boston: Harvard Business Publishing.

Citation Example in Chicago Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies.

Case Study Examples

To give you an idea of a professional case study example, we gathered and linked some below.

Eastman Kodak Case Study

Case Study Example: Audi Trains Mexican Autoworkers in Germany

To conclude, a case study is one of the best methods of getting an overview of what happened to a person, a group, or a situation in practice. It allows you to have an in-depth glance at the real-life problems that businesses, healthcare industry, criminal justice, etc. may face. This insight helps us look at such situations in a different light. This is because we see scenarios that we otherwise would not, without necessarily being there. If you need custom essays , try our research paper writing services .

Get Help Form Qualified Writers

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. If you’re having trouble with your case study, help with essay request - we'll help. EssayPro writers have read and written countless case studies and are experts in endless disciplines. Request essay writing, editing, or proofreading assistance from our custom case study writing service , and all of your worries will be gone.

Don't Know Where to Start?

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. Request ' write my case study ' assistance from our service.

What Is A Case Study?

How to cite a case study in apa, how to write a case study.

Daniel Parker

is a seasoned educational writer focusing on scholarship guidance, research papers, and various forms of academic essays including reflective and narrative essays. His expertise also extends to detailed case studies. A scholar with a background in English Literature and Education, Daniel’s work on EssayPro blog aims to support students in achieving academic excellence and securing scholarships. His hobbies include reading classic literature and participating in academic forums.

is an expert in nursing and healthcare, with a strong background in history, law, and literature. Holding advanced degrees in nursing and public health, his analytical approach and comprehensive knowledge help students navigate complex topics. On EssayPro blog, Adam provides insightful articles on everything from historical analysis to the intricacies of healthcare policies. In his downtime, he enjoys historical documentaries and volunteering at local clinics.

How to Write a Case Study: A Step-by-Step Guide (+ Examples)

by Todd Brehe

on Jan 3, 2024

If you want to learn how to write a case study that engages prospective clients, demonstrates that you can solve real business problems, and showcases the results you deliver, this guide will help.

We’ll give you a proven template to follow, show you how to conduct an engaging interview, and give you several examples and tips for best practices.

Let’s start with the basics.

What is a Case Study?

A business case study is simply a story about how you successfully delivered a solution to your client.

Case studies start with background information about the customer, describe problems they were facing, present the solutions you developed, and explain how those solutions positively impacted the customer’s business.

Do Marketing Case Studies Really Work?

Absolutely. A well-written case study puts prospective clients into the shoes of your paying clients, encouraging them to engage with you. Plus, they:

• Get shared “behind the lines” with decision makers you may not know;
• Leverage the power of “social proof” to encourage a prospective client to take a chance with your company;
• Build trust and foster likeability;
• Lessen the perceived risk of doing business with you and offer proof that your business can deliver results;
• Help prospects become aware of unrecognized problems;
• Show prospects experiencing similar problems that possible solutions are available (and you can provide said solutions);
• Make it easier for your target audience to find you when using Google and other search engines.

Case studies serve your clients too. For example, they can generate positive publicity and highlight the accomplishments of line staff to the management team. Your company might even throw in a new product/service discount, or a gift as an added bonus.

But don’t just take my word for it. Let’s look at a few statistics and success stories:

5 Winning Case Study Examples to Model

Before we get into the nuts and bolts of how to write a case study, let’s go over a few examples of what an excellent one looks like.

The five case studies listed below are well-written, well-designed, and incorporate a time-tested structure.

1. Lane Terralever and Pinnacle at Promontory

This case study example  from Lane Terralever  incorporates images to support the content and effectively uses subheadings to make the piece scannable.

2. WalkMe Mobile and Hulyo

This case study  from WalkMe Mobile  leads with an engaging headline and the three most important results the client was able to generate.

In the first paragraph, the writer expands the list of accomplishments encouraging readers to learn more.

3. CurationSuite Listening Engine

This is an example of a well-designed printable case study . The client, specific problem, and solution are called out in the left column and summarized succinctly.

4. Brain Traffic and ASAE

This long format case study (6 pages) from Brain Traffic  summarizes the challenges, solutions, and results prominently in the left column. It uses testimonials and headshots of the case study participants very effectively.

5. Adobe and Home Depot

This case study  from Adobe and Home Depot  is a great example of combining video, attention-getting graphics, and long form writing. It also uses testimonials and headshots well.

Now that we’ve gone over the basics and showed a few great case study examples you can use as inspiration, let’s roll up our sleeves and get to work.

A Case Study Structure That Pros Use

Let’s break down the structure of a compelling case study:

Choose Your Case Study Format

In this guide, we focus on written case studies. They’re affordable to create, and they have a proven track record. However, written case studies are just one of four case study formats to consider:

• Infographic

If you have the resources, video (like the Adobe and Home Depot example above) and podcast case studies can be very compelling. Hearing a client discuss in his or her own words how your company helped is an effective content marketing strategy

Infographic case studies are usually one-page images that summarize the challenge, proposed solution, and results. They tend to work well on social media.

Follow a Tried-and-True Case Study Template

The success story structure we’re using incorporates a “narrative” or “story arc” designed to suck readers in and captivate their interest.

Note:  I recommend creating a blog post or landing page on your website that includes the text from your case study, along with a downloadable PDF. Doing so helps people find your content when they perform Google and other web searches.

There are a few simple SEO strategies that you can apply to your blog post that will optimize your chances of being found. I’ll include those tips below.

Craft a Compelling Headline

The headline should capture your audience’s attention quickly. Include the most important result you achieved, the client’s name, and your company’s name. Create several examples, mull them over a bit, then pick the best one. And, yes, this means writing the headline is done at the very end.

SEO  Tip:  Let’s say your firm provided “video editing services” and you want to target this primary keyword. Include it, your company name, and your client’s name in the case study title.

Write the Executive Summary

This is a mini-narrative using an abbreviated version of the Challenge + Solution + Results model (3-4 short paragraphs). Write this after you complete the case study.

SEO  Tip:  Include your primary keyword in the first paragraph of the Executive Summary.

Provide the Client’s Background

Introduce your client to the reader and create context for the story.

List the Customer’s Challenges and Problems

Vividly describe the situation and problems the customer was dealing with, before working with you.

SEO  Tip:  To rank on page one of Google for our target keyword, review the questions listed in the “People also ask” section at the top of Google’s search results. If you can include some of these questions and their answers into your case study, do so. Just make sure they fit with the flow of your narrative.

Detail Your Solutions

Explain the product or service your company provided, and spell out how it alleviated the client’s problems. Recap how the solution was delivered and implemented. Describe any training needed and the customer’s work effort.

Show Your Results

Detail what you accomplished for the customer and the impact your product/service made. Objective, measurable results that resonate with your target audience are best.

List Future Plans

Share how your client might work with your company in the future.

Give a Call-to-Action

Clearly detail what you want the reader to do at the end of your case study.

Talk About You

Include a “press release-like” description of your client’s organization, with a link to their website. For your printable document, add an “About” section with your contact information.

And that’s it. That’s the basic structure of any good case study.

Now, let’s go over how to get the information you’ll use in your case study.

How to Conduct an Engaging Case Study Interview

One of the best parts of creating a case study is talking with your client about the experience. This is a fun and productive way to learn what your company did well, and what it can improve on, directly from your customer’s perspective.

Here are some suggestions for conducting great case study interviews:

When Choosing a Case Study Subject, Pick a Raving Fan

Your sales and marketing team should know which clients are vocal advocates willing to talk about their experiences. Your customer service and technical support teams should be able to contribute suggestions.

Clients who are experts with your product/service make solid case study candidates. If you sponsor an online community, look for product champions who post consistently and help others.

When selecting a candidate, think about customer stories that would appeal to your target audience. For example, let’s say your sales team is consistently bumping into prospects who are excited about your solution, but are slow to pull the trigger and do business with you.

In this instance, finding a client who felt the same way, but overcame their reluctance and contracted with you anyway, would be a compelling story to capture and share.

Prepping for the Interview

If you’ve ever seen an Oprah interview, you’ve seen a master who can get almost anyone to open up and talk. Part of the reason is that she and her team are disciplined about planning.

Before conducting a case study interview, talk to your own team about the following:

• What’s unique about the client (location, size, industry, etc.) that will resonate with our prospects?
• Why did the customer select us?
• How did we help the client?
• What’s unique about this customer’s experience?
• What problems did we solve?
• Were any measurable, objective results generated?
• What do we want readers to do after reading this case study analysis?

Pro Tip:  Tee up your client. Send them the questions in advance.

Providing questions to clients before the interview helps them prepare, gather input from other colleagues if needed, and feel more comfortable because they know what to expect.

In a moment, I’ll give you an exhaustive list of interview questions. But don’t send them all. Instead, pare the list down to one or two questions in each section and personalize them for your customer.

Nailing the Client Interview

Decide how you’ll conduct the interview. Will you call the client, use Skype or Facetime, or meet in person? Whatever mode you choose, plan the process in advance.

Make sure you record the conversation. It’s tough to lead an interview, listen to your contact’s responses, keep the conversation flowing, write notes, and capture all that the person is saying.

A recording will make it easier to write the client’s story later. It’s also useful for other departments in your company (management, sales, development, etc.) to hear real customer feedback.

Use open-ended questions that spur your contact to talk and share. Here are some real-life examples:

Introduction

• Recap the purpose of the call. Confirm how much time your contact has to talk (30-45 minutes is preferable).
• Confirm the company’s location, number of employees, years in business, industry, etc.
• What’s the contact’s background, title, time with the company, primary responsibilities, and so on?

Initial Challenges

• Describe the situation at your company before engaging with us?
• What were the initial problems you wanted to solve?
• What was the impact of those problems?
• When did you realize you had to take some action?
• What solutions did you try?
• What solutions did you implement?
• What process did you go through to make a purchase?
• How did the implementation go?
• How would you describe the work effort required of your team?
• If training was involved, how did that go?

Results, Improvements, Progress

• When did you start seeing improvements?
• What were the most valuable results?
• What did your team like best about working with us?
• Would you recommend our solution/company? Why?

Future Plans

• How do you see our companies working together in the future?

Honest Feedback

• Our company is very focused on continual improvement. What could we have done differently to make this an even better experience?
• What would you like us to add or change in our product/service?

During the interview, use your contact’s responses to guide the conversation.

Once the interview is complete, it’s time to write your case study.

How to Write a Case Study… Effortlessly

Case study writing is not nearly as difficult as many people make it out to be. And you don’t have to be Stephen King to do professional work. Here are a few tips:

• Use the case study structure that we outlined earlier, but write these sections first: company background, challenges, solutions, and results.
• Write the headline, executive summary, future plans, and call-to-action (CTA) last.
• In each section, include as much content from your interview as you can. Don’t worry about editing at this point
• Tell the story by discussing their trials and tribulations.
• Stay focused on the client and the results they achieved.
• Make their organization and employees shine.
• When including information about your company, frame your efforts in a supporting role.

Also, make sure to do the following:

Add Testimonials, Quotes, and Visuals

The more you can use your contact’s words to describe the engagement, the better. Weave direct quotes throughout your narrative.

Strive to be conversational when you’re writing case studies, as if you’re talking to a peer.

Include images in your case study that visually represent the content and break up the text. Photos of the company, your contact, and other employees are ideal.

If you need to incorporate stock photos, here are three resources:

• Deposit p hotos

And if you need more, check out Smart Blogger’s excellent resource: 17 Sites with High-Quality, Royalty-Free Stock Photos .

Proofread and Tighten Your Writing

Make sure there are no grammar, spelling, or punctuation errors. If you need help, consider using a grammar checker tool like Grammarly .

My high school English teacher’s mantra was “tighten your writing.” She taught that impactful writing is concise and free of weak, unnecessary words . This takes effort and discipline, but will make your writing stronger.

Also, keep in mind that we live in an attention-diverted society. Before your audience will dive in and read each paragraph, they’ll first scan your work.  Use subheadings  to summarize information, convey meaning quickly, and pull the reader in.

Be Sure to Use Best Practices

Consider applying the following best practices to your case study:

• Stay laser-focused on your client and the results they were able to achieve.
• Even if your audience is technical, minimize the use of industry jargon . If you use acronyms, explain them.
• Leave out the selling and advertising.
• Don’t write like a Shakespearean wannabe. Write how people speak. Write to be understood.
• Clear and concise writing is not only more understandable, it inspires trust. Don’t ramble.
• Weave your paragraphs together so that each sentence is dependent on the one before and after it.
• Include a specific case study call-to-action (CTA).
• A recommended case study length is 2-4 pages.
• Commit to building a library of case studies.

Get Client Approval

After you have a final draft, send it to the client for review and approval. Incorporate any edits they suggest.

Use or modify the following “Consent to Publish” form to get the client’s written sign-off:

Consent to Publish

Case Study  Title:

I hereby confirm that I have reviewed the case study listed above and on behalf of the [Company Name], I provide full permission for the work to be published, in whole or in part, for the life of the work, in all languages and all formats by [Company publishing the case study].

By signing this form, I affirm that I am authorized to grant full permission.

Company Name:

E-mail Address:

Common Case Study Questions (& Answers)

We’ll wrap things up with a quick Q&A. If you have a question I didn’t answer, be sure to leave it in a blog comment below.

Should I worry about print versions of my case studies?

Absolutely.

As we saw in the CurationSuite  and Brain Traffic  examples earlier, case studies get downloaded, printed, and shared. Prospects can and will judge your book by its cover.

So, make sure your printed case study is eye-catching and professionally designed. Hire a designer  if necessary.

Why are good case studies so effective?

Case studies work because people trust them.

They’re not ads, they’re not press releases, and they’re not about how stellar your company is.

Plus, everyone likes spellbinding stories with a hero [your client], a conflict [challenges], and a riveting resolution [best solution and results].

How do I promote my case study?

After you’ve written your case study and received the client’s approval to use it, you’ll want to get it in front of as many eyes as possible.

Try the following:

• Make sure your case studies can be easily found on your company’s homepage.
• Tweet and share the case study on your various social media accounts.
• Have your sales team use the case study as a reason to call on potential customers. For example: “Hi [prospect], we just published a case study on Company A. They were facing some of the same challenges I believe your firm is dealing with. I’m going to e-mail you a copy. Let me know what you think.”
• Distribute printed copies at trade shows, seminars, or during sales presentations.
• If you’re bidding on a job and have to submit a quote or a Request for Proposal (RFP), include relevant case studies as supporting documents.

Ready to Write a Case Study That Converts?

If you want to stand out and you want to win business, case studies should be an integral part of your sales and marketing efforts.

Hopefully, this guide answered some of your questions and laid out a path that will make it faster and easier for your team to create professional, sales-generating content.

Now it’s time to take action and get started. Gather your staff, select a client, and ask a contact to participate. Plan your interview and lead an engaging conversation. Write up your client’s story, make them shine, and then share it.

Get better at the case study process by doing it more frequently. Challenge yourself to write at least one case study every two months.

As you do, you’ll be building a valuable repository of meaningful, powerful content. These success stories will serve your business in countless ways, and for years to come.

Content Marketing

The ultimate toolkit for becoming one of the highest-paid writers online. Premium training. Yours for free.

Written by Todd Brehe

Latest from the blog.

9+ X/Twitter Username Ideas to Craft the Perfect Handle

100+ Epic Short Story Ideas to Inspire Your Own in 2024

10+ Essential X/Twitter Tools to Amplify Your X/Twitter Marketing

With over 300k subscribers and 4 million readers, Smart Blogger is one of the world's largest websites dedicated to writing and blogging.

Best of the Blog

© 2012-2024 Smart Blogger — Boost Blog Traffic, Inc.

Terms  |  Privacy Policy  |  Refund Policy  |  Affiliate Disclosure

• How to Order

Writing A Case Study

A Complete Case Study Writing Guide With Examples

People also read

Simple Case Study Format for Students to Follow

Understand the Types of Case Study Here

Brilliant Case Study Examples and Templates For Your Help

Many writers find themselves grappling with the challenge of crafting persuasive and engaging case studies. 

The process can be overwhelming, leaving them unsure where to begin or how to structure their study effectively. And, without a clear plan, it's tough to show the value and impact in a convincing way.

But don’t worry!

In this blog, we'll guide you through a systematic process, offering step-by-step instructions on crafting a compelling case study. 

Along the way, we'll share valuable tips and illustrative examples to enhance your understanding. So, let’s get started.

• 1. What is a Case Study? 
• 2. Types of Case Studies
• 3. How To Write a Case Study - 9 Steps
• 4. Case Study Methods
• 5. Case Study Format
• 6. Case Study Examples
• 7. Benefits and Limitations of Case Studies

What is a Case Study? 

A case study is a detailed analysis and examination of a particular subject, situation, or phenomenon. It involves comprehensive research to gain a deep understanding of the context and variables involved. 

Typically used in academic, business, and marketing settings, case studies aim to explore real-life scenarios, providing insights into challenges, solutions, and outcomes. They serve as valuable tools for learning, decision-making, and showcasing success stories.

Tough Essay Due? Hire Tough Writers!

Types of Case Studies

Case studies come in various forms, each tailored to address specific objectives and areas of interest. Here are some of the main types of case studies :

• Illustrative Case Studies: These focus on describing a particular situation or event, providing a detailed account to enhance understanding.
• Exploratory Case Studies: Aimed at investigating an issue and generating initial insights, these studies are particularly useful when exploring new or complex topics.
• Explanatory Case Studies: These delve into the cause-and-effect relationships within a given scenario, aiming to explain why certain outcomes occurred.
• Intrinsic Case Studies: Concentrating on a specific case that holds intrinsic value, these studies explore the unique qualities of the subject itself.
• Instrumental Case Studies: These are conducted to understand a broader issue and use the specific case as a means to gain insights into the larger context.
• Collective Case Studies: Involving the study of multiple cases, this type allows for comparisons and contrasts, offering a more comprehensive view of a phenomenon or problem.

How To Write a Case Study - 9 Steps

Crafting an effective case study involves a structured approach to ensure clarity, engagement, and relevance. 

Here's a step-by-step guide on how to write a compelling case study:

Step 1: Define Your Objective

Before diving into the writing process, clearly define the purpose of your case study. Identify the key questions you want to answer and the specific goals you aim to achieve. 

Whether it's to showcase a successful project, analyze a problem, or demonstrate the effectiveness of a solution, a well-defined objective sets the foundation for a focused and impactful case study.

Step 2: Conduct Thorough Research

Gather all relevant information and data related to your chosen case. This may include interviews, surveys, documentation, and statistical data. 

Ensure that your research is comprehensive, covering all aspects of the case to provide a well-rounded and accurate portrayal. 

The more thorough your research, the stronger your case study's foundation will be.

Step 3: Introduction: Set the Stage

Begin your case study with a compelling introduction that grabs the reader's attention. Clearly state the subject and the primary issue or challenge faced. 

Engage your audience by setting the stage for the narrative, creating intrigue, and highlighting the significance of the case.

Step 4: Present the Background Information

Provide context by presenting the background information of the case. Explore relevant history, industry trends, and any other factors that contribute to a deeper understanding of the situation. 

This section sets the stage for readers, allowing them to comprehend the broader context before delving into the specifics of the case.

Step 5: Outline the Challenges Faced

Identify and articulate the challenges or problems encountered in the case. Clearly define the obstacles that needed to be overcome, emphasizing their significance. 

This section sets the stakes for your audience and prepares them for the subsequent exploration of solutions.

Step 6: Detail the Solutions Implemented

Describe the strategies, actions, or solutions applied to address the challenges outlined. Be specific about the decision-making process, the rationale behind the chosen solutions, and any alternatives considered. 

This part of the case study demonstrates problem-solving skills and showcases the effectiveness of the implemented measures.

Paper Due? Why Suffer? That's our Job!

Step 7: Showcase Measurable Results

Present tangible outcomes and results achieved as a direct consequence of the implemented solutions. Use data, metrics, and success stories to quantify the impact. 

Whether it's increased revenue, improved efficiency, or positive customer feedback, measurable results add credibility and validation to your case study.

Step 8: Include Engaging Visuals

Enhance the readability and visual appeal of your case study by incorporating relevant visuals such as charts, graphs, images, and infographics. 

Visual elements not only break up the text but also provide a clearer representation of data and key points, making your case study more engaging and accessible.

Step 9: Provide a Compelling Conclusion

Wrap up your case study with a strong and conclusive summary. Revisit the initial objectives, recap key findings, and emphasize the overall success or significance of the case. 

This section should leave a lasting impression on your readers, reinforcing the value of the presented information.

Case Study Methods

The methods employed in case study writing are diverse and flexible, catering to the unique characteristics of each case. Here are common methods used in case study writing:

Conducting one-on-one or group interviews with individuals involved in the case to gather firsthand information, perspectives, and insights.

• Observation

Directly observing the subject or situation to collect data on behaviors, interactions, and contextual details.

• Document Analysis

Examining existing documents, records, reports, and other written materials relevant to the case to gather information and insights.

• Surveys and Questionnaires

Distributing structured surveys or questionnaires to relevant stakeholders to collect quantitative data on specific aspects of the case.

• Participant Observation

Combining direct observation with active participation in the activities or events related to the case to gain an insider's perspective.

• Triangulation

Using multiple methods (e.g., interviews, observation, and document analysis) to cross-verify and validate the findings, enhancing the study's reliability.

• Ethnography

Immersing the researcher in the subject's environment over an extended period, focusing on understanding the cultural context and social dynamics.

Case Study Format

Effectively presenting your case study is as crucial as the content itself. Follow these formatting guidelines to ensure clarity and engagement:

• Opt for fonts that are easy to read, such as Arial, Calibri, or Times New Roman.
• Maintain a consistent font size, typically 12 points for the body text.
• Aim for double-line spacing to maintain clarity and prevent overwhelming the reader with too much text.
• Utilize bullet points to present information in a concise and easily scannable format.
• Use numbered lists when presenting a sequence of steps or a chronological order of events.
• Bold or italicize key phrases or important terms to draw attention to critical points.
• Use underline sparingly, as it can sometimes be distracting in digital formats.
• Choose the left alignment style.
• Use hierarchy to distinguish between different levels of headings, making it easy for readers to navigate.

If you're still having trouble organizing your case study, check out this blog on case study format for helpful insights.

Case Study Examples

If you want to understand how to write a case study, examples are a fantastic way to learn. That's why we've gathered a collection of intriguing case study examples for you to review before you begin writing.

Case Study Research Example

Case Study Template

Case Study Introduction Example

Amazon Case Study Example

Business Case Study Example

APA Format Case Study Example

Psychology Case Study Example

Medical Case Study Example

UX Case Study Example

Looking for more examples? Check out our blog on case study examples for your inspiration!

Benefits and Limitations of Case Studies

Case studies are a versatile and in-depth research method, providing a nuanced understanding of complex phenomena. 

However, like any research approach, case studies come with their set of benefits and limitations. Some of them are given below:

Tips for Writing an Effective Case Study

Here are some important tips for writing a good case study:

• Clearly articulate specific, measurable research questions aligned with your objectives.
• Identify whether your case study is exploratory, explanatory, intrinsic, or instrumental.
• Choose a case that aligns with your research questions, whether it involves an individual case or a group of people through multiple case studies.
• Explore the option of conducting multiple case studies to enhance the breadth and depth of your findings.
• Present a structured format with clear sections, ensuring readability and alignment with the type of research.
• Clearly define the significance of the problem or challenge addressed in your case study, tying it back to your research questions.
• Collect and include quantitative and qualitative data to support your analysis and address the identified research questions.
• Provide sufficient detail without overwhelming your audience, ensuring a comprehensive yet concise presentation.
• Emphasize how your findings can be practically applied to real-world situations, linking back to your research objectives.
• Acknowledge and transparently address any limitations in your study, ensuring a comprehensive and unbiased approach.

To sum it up, creating a good case study involves careful thinking to share valuable insights and keep your audience interested. 

Stick to basics like having clear questions and understanding your research type. Choose the right case and keep things organized and balanced.

Remember, your case study should tackle a problem, use relevant data, and show how it can be applied in real life. Be honest about any limitations, and finish with a clear call-to-action to encourage further exploration.

However, if you are having issues understanding how to write a case study, it is best to hire MyPerfectWords.com 's Professional service.  Hiring our custom essay service will ensure that you will get the best grades on your essay without any stress of a deadline. 

So be sure to check out case study writing service online and stay up to the mark with your grades. 

Frequently Asked Questions

What is the purpose of a case study.

The objective of a case study is to do intensive research on a specific matter, such as individuals or communities. It's often used for academic purposes where you want the reader to know all factors involved in your subject while also understanding the processes at play.

What are the sources of a case study?

Some common sources of a case study include:

• Archival records
• Direct observations and encounters
• Participant observation
• Facts and statistics
• Physical artifacts

What is the sample size of a case study?

A normally acceptable size of a case study is 30-50. However, the final number depends on the scope of your study and the on-ground demographic realities.

Write Essay Within 60 Seconds!

Dr. Barbara is a highly experienced writer and author who holds a Ph.D. degree in public health from an Ivy League school. She has worked in the medical field for many years, conducting extensive research on various health topics. Her writing has been featured in several top-tier publications.

Paper Due? Why Suffer? That’s our Job!

Keep reading

Main Tips On How To Write Case Study Analysis

Table of contents

• 1 What is a Case Study Analysis?
• 2 Difference Between Research Paper and Case Study
• 3 Types of Case Studies
• 4 Writing a Case Study Draft
• 5 How to Write a Case Study Outline
• 6 How to Write a Case Study
• 7 How to Analyze a Case Study
• 8.1 Tips for a Successful Case Analysis
• 9 How to Format a Case Study
• 10 How to Create a Title Page and Cite a Case Study

Many students struggle with how to do a case study analysis. Writing such an assignment is always daunting, as it requires you to analyze something and form conclusions based on your research.

It usually focuses on phenomena you can’t study in a typical way. Therefore, when writing such a text, you have to prepare thoughtfully. In the  PapersOwl article, you will find out what this academic writing is and how to write a case analysis.

What is a Case Study Analysis?

A case study analysis is a form of writing that analyzes a specific situation, event, object, person, or even place. The said analysis should be written and structured to lead to a conclusion. Typically, you cannot analyze the subject of this essay via quantitative methods.

Note that such studies can be used in various fields and require the use of many theories that can give you a unique approach to the matter. For example, you can write a paper like this about social sciences, business, medicine, and many other fields. Each of these will require a particular approach.

Difference Between Research Paper and Case Study

Both research papers and case studies share common features, yet they also differ in several key aspects. Hence, knowing these parallels and distinctions, you will be able to learn how to write a case study assignment correctly.

A case study introduction can present the topic but does not require a citation of other similar works or the writer’s opinion. In contrast, a research paper requires citations right from the introduction, as it builds on the research of others.

Furthermore, authors of case studies should share their insights and perspectives on the case they study. A major difference is that  research papers  concentrate on a specific issue and use solid evidence. In contrast, case studies examine a subject in depth, offer detailed information, and help develop critical thinking skills.

Types of Case Studies

When it comes to writing case study analysis, there are five types you must learn to differentiate. That is important because whether you get such an assignment, you will have to understand the task first and then start with the writing.

Here are the types of case studies which you will encounter most often:

• Problem-oriented – this type focuses on real-life situations or theoretical issues and aims to solve them. For example, “World Hunger.”
• The second type is critical , also known as innate . The goal is to investigate a specific case, particularly its effects and what causes them – “Why Toys Remain Gender Stereotyped.”

Historical case studies focus on events from our past. The text should contain information about a specific historical period of this type. Your goal will be to provide different perspectives of an event and parallel them to current-day issues. An example of such a topic is “Racism During Ancient Times – Roman Empire.”

• The illustrative or Instrumental type focuses on describing a particular event. Here you have to explain the event’s outcome and what you have learned from it. A sample of such a topic is “The Effects of Dance Therapy in Depressed Adolescents.”
• Collective case studies are the fifth type. They include a collection of data about a specific case you will use to compare. E.g., “The Management Leadership at Work.”
• Exploratory Case Studies . This type often applies in new fields of study or in cases where little data exists. An example of this type is “Initial Insights into Behavioral Trends in Cryptocurrency Trading.”

Writing a Case Study Draft

Creating a rough draft is the foremost step to take while writing such a paper. It is an essential step you must take, no matter how experienced you are. By doing it, you will be able to get more creative. In addition, you can explore options and decide on what to focus on more precisely, which will eventually result in a higher grade for your work.

So, sit down in a quiet place, bring an old-fashioned pen and paper, and start drafting ideas. Read them briefly while sipping on your tea and edit. After you have decided where your focus will lay, you have to develop these ideas and thoughts a bit more, then pick the best one.

How to Write a Case Study Outline

Creating a case study outline is an essential step in the writing process using the case study research method. Here’s how you can structure this preparation effectively:

• Conduct Research: Begin by using academic search engines like Google Scholar, or refer to books and published materials to gather relevant data. This research will help clarify the structure of your case study and determine the main points that need addressing.
• Formulate Your Thesis Statement: Develop a clear thesis statement that will guide the narrative of your case study. This statement should be based on the specific topic you have chosen.
• Outline Preparation
• Review Case Details: Thoroughly review the case you are analyzing to ensure a deep understanding of the subject.
• Note-taking and Question Formulation: Write down important notes and questions that arise during your review. Highlight relevant facts and critical data points that will support your analysis.
• Identify Problems and Causes: Identify the main problems and consider what their causes might be. This includes figuring out who is responsible and how these problems impact the company.
• Preliminary Research: Perform initial research to discover if similar problems have occurred previously and how they were resolved. This can offer insights into possible solutions and strategies for your case study.

The outline for your case study paper is essential to your writing process. It lets your professor assess your understanding of the topic, the correctness of your format, and the structure of your paper. They can spot any potential problems with your work. Having an outline serves as a guide for both you and your professor, making it easier to plan and write your paper . With the help of a well-crafted outline, your professor can navigate your paper more easily and spot any issues before they arise. Writing a case study can be challenging, but having a strong outline makes the process simpler.

A case study outline will most likely consist of the following sections and information:

• Case study title;
• Student’s name;
• Educational instructor’s name;
• Course name.

Introduction/Summary

• It briefly overviews your case study, thesis statement, and essential findings.

Main Body Paragraphs – usually three to five

• Literature Review/Background Information;
• Method/Findings;
• Discussion/Solutions/Recommendations.
• Repeat a paraphrased version of your thesis;
• Summarize your case study key points;
• Finish with a statement that can recommend the audience to read further by giving them thoughts to contemplate and develop new ideas.

Reference List or Bibliography

• List all the sources of evidence used to create your case study in your educational organization’s required citation style (APA, MLA, Chicago, Harvard, Turabian, etc.).

How to Write a Case Study

The way to write a case study is by strictly following the main idea of your thesis. You already know that a study’s main body consists of an introduction, literature review, method, discussion, and conclusion sections. Thus, all that is left is to focus on these parts and understand how to make them perfect.

• The Introduction/Summary: The introduction of a case study should start with a solid first sentence that will hook the reader. Afterward, you must explain the question you will be answering and why you are doing it. You should include some of the topic’s relevant history and details here. Also, you should explain how your case study will enrich the available information. Also, briefly summarize your literature review, which your findings will use as a base. Try to finish positively and make the reader see the benefits of reading your work.

• Background Information/Literature Review: ‍Structure and present the data from your academic sources . This section will show the reader how vital your work is and the basis for it.
• Method/Findings: This part aims to explain the case you selected, how it connects to the issue, and why you chose them. You can also add what methods you use. Here you must note that the data collection methods are qualitative, not quantitative, for case studies. That means the data is not random but well-structured and chronically taken from interviews, focus groups, and other sources.
• Discussion/Solutions: Restate your thesis but rephrase it, then draw your conclusions from what you have discovered via your research and link to your statement. Inform the audience of your main findings and define why the results are relevant to the field. Think about the following questions:

Were the results unexpected? Why/Why not?

How do your findings compare to previous similar case studies in your literature review?

Do your findings correlate to previous results, or do they contradict them?

Are your findings helpful in deepening the current understanding of the topic?

Next, explore possible alternative explanations or interpretations of your findings. Be subjective and explain your paper’s limitations. End with some suggestions for further exploration based on the limits of your work. ‍

• Conclusion: Inform the reader precisely why your case study and findings are relevant, and restate your thesis and main results. Give a summary of previous studies you reviewed and how you contributed to expanding current knowledge. The final should explain how your work can be helpful and implemented in future research.

Your instructor should have an excellent example they can show you, so feel free to ask. They will surely want to help you learn how to write a case study!

How to Analyze a Case Study

Analyzing a case study involves a structured approach that simulates real-life scenarios and is key to developing actionable insights. Here is a step-by-step guide adapted from Ellet, W. (2007) to help you effectively analyze a case study:

• Identify the Type of Case Study

Begin by determining the type of case study you are examining. This could be:

• Problems: Where something significant has occurred, and the cause is unknown.
• Decisions : Where a clear decision needs making, requiring options, criteria, and relevant evidence.
• Evaluations : Where you assess the effectiveness of a performance or outcome.
• Rules : These involve using quantitative methods to analyze a business area.
• Develop a Hypothesis

From the perspective of the protagonist, formulate a hypothesis to address the dilemma. Consider what you need to know about the situation:

• For problems: Understand the aspects, significance, and responsible parties.
• For decisions: Identify the options available, the stakes involved, and the decision-making criteria.
• For evaluations: Determine who or what is evaluated, the stakes, and the key evaluation criteria.
• Evidence and Alternatives

Evaluate your hypothesis by considering:

• The evidence supporting your hypothesis and any additional evidence needed.
• The weaknesses of your hypothesis and possible alternatives.

Writing a Case Analysis

Writing a case analysis involves a structured approach that enables you to communicate your understanding and analytical skills effectively. Here’s how you can craft your analysis to be insightful and comprehensive:

• Start with a Clear Definition or Position Statement

Begin your case analysis by stating your main conclusion, which serves as the answer to “What?” This initial statement should clearly outline what you have concluded from your analysis of the case.

• Build a Strong Argument with Evidence

Support your position statement with solid evidence, which answers “Why?” This evidence can be quantitative (numerical data) or qualitative (observations and interviews). The purpose here is to provide a foundation for your conclusions, showing how you arrived at them through logical reasoning.

• Outline a Chronological Action Plan

Detail the steps necessary to solve the problem, implement a decision, or enhance performance. This section answers “How?” and should include specific, realistic steps that address any major risks associated with your plan.

Tips for a Successful Case Analysis

• Aim to deliver concise and clear results of your analytical process rather than a simple summary or a complete transcript of your thoughts.
• Ensure your reader understands and is persuaded by your analysis by linking your conclusions directly to credible evidence.
• Discuss the advantages and also acknowledge any disadvantages of your conclusions to provide a balanced view.

How to Format a Case Study

Knowing how a case study analysis format should look is crucial. Therefore, you must know what the text structure should look like. The standard one contains about eight sections:

• Introduction/The Executive Summary: As the first part here, you have to hook the reader’s attention, so the introduction of the case study is the most important part of the writing.  Then present them with a brief overview of your case study analyses and their findings. Make sure to form a good thesis statement , as this is the pivotal point of your work.
• Literary Review/Background information: Similarly to other papers, in this part, you have to write your most important facts or findings while identifying the case issue.
• Method/Findings/Discussion: This section can be written separately based on how your text flows. Here you will have to explore more about the case and its findings. Allow yourself to go into more detail instead of just briefly covering them.
• Solutions/Recommendations/Implementation Part: You have to discuss the answers you came up with. Basically, you say why they are fit to solve the case and how you think they can be used in practice. Note that you must write only realistic and practical solutions for the problem. It’s possible to write testable evidence that can support your recommendations.
• Conclusion: Here, you are supposed to cover your whole paper briefly and even repeat the thesis (rephrased). Make sure to highlight the critical points of your case study.
• References or Bibliography: This section must include the sources from which you collected data or whom you consulted. Usually, this part is on a separate page, and the listing should be according to your academic institution’s requirements.
• Appendices (include only if applicable): It is usual for some parts of your materials to be too lengthy or unfit for the other sections of the case study. Therefore, you have to include them here. That can be pictures, raw data of statistics, graphs, notes, etc. The appendix section is strictly for subsidiary materials, do not put the most relevant ones here.
• Author Note: Remember that all educational institutions have their requirement for a case study format. The abovementioned is an example; thus, you may see a section or another is missing, or there are additional ones.

How to Create a Title Page and Cite a Case Study

A case study in APA format for students can differ from one institution to another. So, knowing your college or school requirements is crucial before you start writing. Nonetheless, the general one should look like this:

• Title – A header no longer than nine words has “Case Study” and reflects the content and the idea behind it yet is engaging to read;
• Write your full name;
• The name of your course/class;
• Next is your professor or instructor name;
• The university/school name;
• The date of submission.

When citing in your paper, you must ensure it is done accurately and in your academic style. If you are unsure how to do it, research the requirements and google “How to do a case study analysis in Harvard”, for example. Note that short citations can be in your text, but longer ones should be in the bibliography section.

Hruby, A. (2018). Hruby, A., & Hu, F. B. (2015). The epidemiology of obesity: a big picture. Pharmacoeconomics, 33(7), 673-689. www.sciepub.com. http://www.sciepub.com/reference/254744

Case studies strive to analyze an event, location, case, or person. They can be similar to research papers, so you must pay close attention to the structure and what your professor has requested from you.

Finally, the process of writing can be overwhelming due to the many sections. However, if you take the process step by step and do your preparations properly, you will have an easy time writing the paper. You can also look for assistance online – many services offer to order case study online help . With the right kind of assistance, you can be sure that your paper is of high quality and is due on time!

Readers also enjoyed

WHY WAIT? PLACE AN ORDER RIGHT NOW!

Just fill out the form, press the button, and have no worries!

We use cookies to give you the best experience possible. By continuing we’ll assume you board with our cookie policy.

5 Steps for Writing a Case Study for Business (+Templates)

Get professional tips for writing a case study that drives business impact. Learn the best format and research method to use alongside examples & templates.

7 minute read

helped business professionals at:

SHORT ANSWER

What is a case study.

• Open with an introductory overview
• Explain the problem in question
• Detail the solutions that solved the problem
• Refer to key results
• Finish with recommendations and next steps

Why you need a case study

“I climbed Mount Everest and I did it all by myself.” “Yeah mate, pics or it didn’t happen.” The same logic applies to case studies. In business, it’s “case studies or it didn’t happen.” A well-written case study legitimizes your product or services. It proves the impact your actions have on the bottom line and is the single most important element of building trust amongst prospective clients. But… How do you write a *perfect* case study? One that engages readers and makes them care about your offering and excited to work with you?

In business, a case study , or customer success story, is a marketing tool that showcases how your product or service helped clients overcome business challenges. It uses statistics, quotes, and specific examples to convincingly highlight your ability to produce results.

What is the purpose of a case study?

The purpose of a case study, usually, is to provide your prospective clients with specific examples of how your products or services can help solve business problems they might be facing.

Case studies legitimize your business activities allowing you to go beyond explaining what you do and focus on how well you do it. (And, in case you were wondering just HOW important case studies are, here’s an item of data to ponder: according to a DemandGen report , 78% of B2B buyers want to review case studies before making a purchase decision. Another study by Uplift found that at the end of 2023, f or the third year in a row, marketers ranked case studies the #1 most effective marketing tactic to increase sales—ahead of general website content, SEO, blog posts, social media, paid ads and other tactics. )

There’s no magic behind it. Just a proven, simple formula I’m about to share with you. Spend the next 7 minutes reading this guide and you’ll learn how to write case studies better than any case study you’ve created in the past. Important caveat: this article explains how to write a case study for business purposes. If you’re interested in writing research case studies for academia, refer to this excellent guide by University of Southern California. If, in turn, you’re struggling with putting together a medical case study, here’s a fantastic 101 by the BMJ . I’m not going to pretend I know better than these guys do.

For your reference, here’s an example of our very own case study, showing how, at Storydoc, we helped the Spot company boost some of their key metrics: Learn How Spot by NetApp boosted their conversion rates 2x.

Spot's team used this deck to boost their conversion 2x

By drawing the bigger picture even deep-tech software products can be easily explained.

Browse interactive case study templates

No matter how great the contents of your case study might be, if you fail to present it in an eye-pleasing way, most likely, no one will really read it. The good news? I’ve put together a gallery of the most professional, attention-grabbing case study templates available online. You can find it here: Case Study Templates & Design Tips Or, take a shortcut to great case study design and use our presentation maker . Have a look below to see what your case study might look like.

And now, let’s get to the case study 101. (If you’re only interested in a specific section of a case study, simply click on a jump-to link in the table of contents below.

Here's how to write a case study:

1. Open with an introductory overview

The last thing you want is for someone to open your case study, give it a quick glance, and decide to skip. See— People don’t usually read case studies. At least not immediately. First, they skim the contents to see if the subject is relevant enough. How to make sure your case study sticks? At the beginning, place an introductory overview (also called an “executive summary”). Provide an overview of the whole case. It’s not supposed to be a catchy intro but a full synopsis, detailing the problem at hand, your assumptions, the solutions implemented, and the results achieved.

How to write a case study introduction?

Introduce the purpose of the case study—specify exactly what you were aiming to achieve.

Define the problem or the most significant challenge. For instance, low conversion rates, a technological issue or high costs. (It could also be a combination of such factors!)

Explain briefly what the solution to the problem was.

Share the most important results your actions produced. Don’t go into too much detail, a few key points will do. It’s best if you can quantify the results: numbers pop!

Keep it short. Usually, 2–4 paragraphs + a few bullet points with key results will do.

While, as its name implies, this section comes at the beginning of your case study, write it last. First, craft the rest of your document, then pick the most important bits and compile them into the introductory overview.

2. Explain the problem in question

“Adam caught a flat tire. In the middle of the desert. He had no spare, no signal, no food, and only enough water to keep him alive for 48 hours.” Oh dear, poor Adam! What could possibly be done to help him?! See, in your case study, make the client seem like Adam so that, later on, you can paint your company like the miraculous savior. Of course, I’m exaggerating, but only so much. The purpose of the “problem” section in a case study is to arouse emotions from the readers. Ideally, in such a way that they can picture themselves as Adam. Highlight a problem your product or services solve and present an example of when that problem was troubling a client really badly.

How to write a “problem” section in a case study?

In a single sentence, describe your customer’s business challenges and objectives.

Explain the problem your customer faced that prevented them from achieving those objectives prior to working with you.

If that was the case, mention other solutions your client experimented with that didn’t work out and explain why.

Make it clear how the issue or problem impacted the client’s business results so that it’s easy to understand why a solution was badly needed.

3. Detail the solutions implemented to solve the problem

Here comes the moment to toot your own horn a bit (and also that moment when you can get slightly technical). Present your solutions in reference to the issue your client was dealing with and make it obvious that those are easily replicable for all future cases. Of course, the exact formula for this section will depend on your industry and mode of operation. Sometimes a 2–3 paragraph summary will be enough, in other cases, you’ll need to include more detailed technical specs regarding the solution you implemented.

How to write a solutions section in a case study?

Focus on your customer’s experience in using your product or services.

Explain the process: say how long it took to get the solution up and running and what teams on your customer’s end were involved.

Highlight the features of your product or service that turned out to be the most beneficial to your customer.

If possible, attach or link to relevant assets that will work as real-life examples of your solution (unless, of course, the information is highly sensitive).

Always run your case study by your client’s marketing team before you go live. Even if you’re using direct quotes or verifiable results, it’s ultimately their decision whether or not to make certain information freely available.

4. Refer to key results

In business, nothing speaks louder than ROI and you know it. Prospective customers reading your case study won’t be bothered to take notice of your state-of-the-art technology or innovative approach. Neither will they care about your past customers’ happiness. What they want to know is this: Will that help me save or make money? When writing a case study, your job is to present results in a way that answers the above question with a resounding YES. You need to make it blatantly obvious that your solutions heavily impact the bottom line of the client in question and that such results are easily replicable.

Here’s how to write about results:

In a few bullet points, list numerical results your solution delivered to the client.

Ideally, you’ll want to include revenue-related data: increase in clients’ base, more demos booked, higher conversion rates, or optimized pricing.

If you can’t (or aren’t allowed to) share hard sales numbers, refer to softer KPIs: time saved, customer happiness scores, expanding the community, or enhancing brand visibility.

If possible, by all means include quotes from your client. Results should speak for themselves, obviously, but showing the real human whose problems you solved makes for a much more powerful narrative. Plus, it further adds credibility to the case study. Start by preparing a list of powerful case study questions to guide your client interviews.8

5. Finish with recommendations and next steps

Everyone enjoys a solid epilogue. To end on a high note, include a list of key findings from your case study. Even if a given reader won’t decide to get in touch with you, at least you’ll provide them with a valuable source of knowledge—sometimes that’s enough to keep your company top of mind in the future. Plus, if you’re planning to continue working with the subject of your case study, definitely mention that! It shows that your support is valuable enough to warrant long-term collaboration, not just a one-off endeavor. Now, not every case study requires a call to action (especially if your main purpose is to inform and educate rather than convert, which is okay, too), but for those more commercially-oriented ones, do add it. Make your CTA singular and clear —if the most desired action is to reach out to you, leave your contact details, if you’d rather direct prospects to a landing page or a welcome screen, add a button.

And that’s a wrap!

Here are the key points to keep in mind when writing a case study:

Put an introductory overview at the beginning.

Present the problem you were solving and your exact solutions to that problem.

Include numerical, verifiable results your product or services delivered for the client.

Explain what the next steps are, especially if you plan to continue working with the client.

Finish with a strong, clear CTA, making it easy for prospects to reach out to you.

Thanks for reading the guide. Keeping my fingers crossed for your case study and wishing many successful cases so that you’ll always have something to write about.

Hi, I'm John, Editor-in-chief at Storydoc. As a content marketer and digital writer specializing in B2B SaaS, my main goal is to provide you with up-to-date tips for effective business storytelling and equip you with all the right tools to enable your sales efforts.

Found this post useful?

Subscribe to our monthly newsletter.

Get notified as more awesome content goes live

(No spam, no ads, opt-out whenever)

You've just joined an elite group of people that make the top performing 1% of sales and marketing collateral.

Make your best case study to date

Try Storydoc for free for 14 days (keep anything you make for ever!)

Organizing Your Social Sciences Research Assignments

• Annotated Bibliography
• Analyzing a Scholarly Journal Article
• Group Presentations
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Leading a Class Discussion
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Analysis Paper
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Reflective Paper
• Writing a Research Proposal
• Generative AI and Writing
• Acknowledgments

A case study research paper examines a person, place, event, condition, phenomenon, or other type of subject of analysis in order to extrapolate  key themes and results that help predict future trends, illuminate previously hidden issues that can be applied to practice, and/or provide a means for understanding an important research problem with greater clarity. A case study research paper usually examines a single subject of analysis, but case study papers can also be designed as a comparative investigation that shows relationships between two or more subjects. The methods used to study a case can rest within a quantitative, qualitative, or mixed-method investigative paradigm.

Case Studies. Writing@CSU. Colorado State University; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010 ; “What is a Case Study?” In Swanborn, Peter G. Case Study Research: What, Why and How? London: SAGE, 2010.

How to Approach Writing a Case Study Research Paper

General information about how to choose a topic to investigate can be found under the " Choosing a Research Problem " tab in the Organizing Your Social Sciences Research Paper writing guide. Review this page because it may help you identify a subject of analysis that can be investigated using a case study design.

However, identifying a case to investigate involves more than choosing the research problem . A case study encompasses a problem contextualized around the application of in-depth analysis, interpretation, and discussion, often resulting in specific recommendations for action or for improving existing conditions. As Seawright and Gerring note, practical considerations such as time and access to information can influence case selection, but these issues should not be the sole factors used in describing the methodological justification for identifying a particular case to study. Given this, selecting a case includes considering the following:

• The case represents an unusual or atypical example of a research problem that requires more in-depth analysis? Cases often represent a topic that rests on the fringes of prior investigations because the case may provide new ways of understanding the research problem. For example, if the research problem is to identify strategies to improve policies that support girl's access to secondary education in predominantly Muslim nations, you could consider using Azerbaijan as a case study rather than selecting a more obvious nation in the Middle East. Doing so may reveal important new insights into recommending how governments in other predominantly Muslim nations can formulate policies that support improved access to education for girls.
• The case provides important insight or illuminate a previously hidden problem? In-depth analysis of a case can be based on the hypothesis that the case study will reveal trends or issues that have not been exposed in prior research or will reveal new and important implications for practice. For example, anecdotal evidence may suggest drug use among homeless veterans is related to their patterns of travel throughout the day. Assuming prior studies have not looked at individual travel choices as a way to study access to illicit drug use, a case study that observes a homeless veteran could reveal how issues of personal mobility choices facilitate regular access to illicit drugs. Note that it is important to conduct a thorough literature review to ensure that your assumption about the need to reveal new insights or previously hidden problems is valid and evidence-based.
• The case challenges and offers a counter-point to prevailing assumptions? Over time, research on any given topic can fall into a trap of developing assumptions based on outdated studies that are still applied to new or changing conditions or the idea that something should simply be accepted as "common sense," even though the issue has not been thoroughly tested in current practice. A case study analysis may offer an opportunity to gather evidence that challenges prevailing assumptions about a research problem and provide a new set of recommendations applied to practice that have not been tested previously. For example, perhaps there has been a long practice among scholars to apply a particular theory in explaining the relationship between two subjects of analysis. Your case could challenge this assumption by applying an innovative theoretical framework [perhaps borrowed from another discipline] to explore whether this approach offers new ways of understanding the research problem. Taking a contrarian stance is one of the most important ways that new knowledge and understanding develops from existing literature.
• The case provides an opportunity to pursue action leading to the resolution of a problem? Another way to think about choosing a case to study is to consider how the results from investigating a particular case may result in findings that reveal ways in which to resolve an existing or emerging problem. For example, studying the case of an unforeseen incident, such as a fatal accident at a railroad crossing, can reveal hidden issues that could be applied to preventative measures that contribute to reducing the chance of accidents in the future. In this example, a case study investigating the accident could lead to a better understanding of where to strategically locate additional signals at other railroad crossings so as to better warn drivers of an approaching train, particularly when visibility is hindered by heavy rain, fog, or at night.
• The case offers a new direction in future research? A case study can be used as a tool for an exploratory investigation that highlights the need for further research about the problem. A case can be used when there are few studies that help predict an outcome or that establish a clear understanding about how best to proceed in addressing a problem. For example, after conducting a thorough literature review [very important!], you discover that little research exists showing the ways in which women contribute to promoting water conservation in rural communities of east central Africa. A case study of how women contribute to saving water in a rural village of Uganda can lay the foundation for understanding the need for more thorough research that documents how women in their roles as cooks and family caregivers think about water as a valuable resource within their community. This example of a case study could also point to the need for scholars to build new theoretical frameworks around the topic [e.g., applying feminist theories of work and family to the issue of water conservation].

Eisenhardt, Kathleen M. “Building Theories from Case Study Research.” Academy of Management Review 14 (October 1989): 532-550; Emmel, Nick. Sampling and Choosing Cases in Qualitative Research: A Realist Approach . Thousand Oaks, CA: SAGE Publications, 2013; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Seawright, Jason and John Gerring. "Case Selection Techniques in Case Study Research." Political Research Quarterly 61 (June 2008): 294-308.

Structure and Writing Style

The purpose of a paper in the social sciences designed around a case study is to thoroughly investigate a subject of analysis in order to reveal a new understanding about the research problem and, in so doing, contributing new knowledge to what is already known from previous studies. In applied social sciences disciplines [e.g., education, social work, public administration, etc.], case studies may also be used to reveal best practices, highlight key programs, or investigate interesting aspects of professional work.

In general, the structure of a case study research paper is not all that different from a standard college-level research paper. However, there are subtle differences you should be aware of. Here are the key elements to organizing and writing a case study research paper.

I.  Introduction

As with any research paper, your introduction should serve as a roadmap for your readers to ascertain the scope and purpose of your study . The introduction to a case study research paper, however, should not only describe the research problem and its significance, but you should also succinctly describe why the case is being used and how it relates to addressing the problem. The two elements should be linked. With this in mind, a good introduction answers these four questions:

• What is being studied? Describe the research problem and describe the subject of analysis [the case] you have chosen to address the problem. Explain how they are linked and what elements of the case will help to expand knowledge and understanding about the problem.
• Why is this topic important to investigate? Describe the significance of the research problem and state why a case study design and the subject of analysis that the paper is designed around is appropriate in addressing the problem.
• What did we know about this topic before I did this study? Provide background that helps lead the reader into the more in-depth literature review to follow. If applicable, summarize prior case study research applied to the research problem and why it fails to adequately address the problem. Describe why your case will be useful. If no prior case studies have been used to address the research problem, explain why you have selected this subject of analysis.
• How will this study advance new knowledge or new ways of understanding? Explain why your case study will be suitable in helping to expand knowledge and understanding about the research problem.

Each of these questions should be addressed in no more than a few paragraphs. Exceptions to this can be when you are addressing a complex research problem or subject of analysis that requires more in-depth background information.

II.  Literature Review

The literature review for a case study research paper is generally structured the same as it is for any college-level research paper. The difference, however, is that the literature review is focused on providing background information and  enabling historical interpretation of the subject of analysis in relation to the research problem the case is intended to address . This includes synthesizing studies that help to:

• Place relevant works in the context of their contribution to understanding the case study being investigated . This would involve summarizing studies that have used a similar subject of analysis to investigate the research problem. If there is literature using the same or a very similar case to study, you need to explain why duplicating past research is important [e.g., conditions have changed; prior studies were conducted long ago, etc.].
• Describe the relationship each work has to the others under consideration that informs the reader why this case is applicable . Your literature review should include a description of any works that support using the case to investigate the research problem and the underlying research questions.
• Identify new ways to interpret prior research using the case study . If applicable, review any research that has examined the research problem using a different research design. Explain how your use of a case study design may reveal new knowledge or a new perspective or that can redirect research in an important new direction.
• Resolve conflicts amongst seemingly contradictory previous studies . This refers to synthesizing any literature that points to unresolved issues of concern about the research problem and describing how the subject of analysis that forms the case study can help resolve these existing contradictions.
• Point the way in fulfilling a need for additional research . Your review should examine any literature that lays a foundation for understanding why your case study design and the subject of analysis around which you have designed your study may reveal a new way of approaching the research problem or offer a perspective that points to the need for additional research.
• Expose any gaps that exist in the literature that the case study could help to fill . Summarize any literature that not only shows how your subject of analysis contributes to understanding the research problem, but how your case contributes to a new way of understanding the problem that prior research has failed to do.
• Locate your own research within the context of existing literature [very important!] . Collectively, your literature review should always place your case study within the larger domain of prior research about the problem. The overarching purpose of reviewing pertinent literature in a case study paper is to demonstrate that you have thoroughly identified and synthesized prior studies in relation to explaining the relevance of the case in addressing the research problem.

III.  Method

In this section, you explain why you selected a particular case [i.e., subject of analysis] and the strategy you used to identify and ultimately decide that your case was appropriate in addressing the research problem. The way you describe the methods used varies depending on the type of subject of analysis that constitutes your case study.

If your subject of analysis is an incident or event . In the social and behavioral sciences, the event or incident that represents the case to be studied is usually bounded by time and place, with a clear beginning and end and with an identifiable location or position relative to its surroundings. The subject of analysis can be a rare or critical event or it can focus on a typical or regular event. The purpose of studying a rare event is to illuminate new ways of thinking about the broader research problem or to test a hypothesis. Critical incident case studies must describe the method by which you identified the event and explain the process by which you determined the validity of this case to inform broader perspectives about the research problem or to reveal new findings. However, the event does not have to be a rare or uniquely significant to support new thinking about the research problem or to challenge an existing hypothesis. For example, Walo, Bull, and Breen conducted a case study to identify and evaluate the direct and indirect economic benefits and costs of a local sports event in the City of Lismore, New South Wales, Australia. The purpose of their study was to provide new insights from measuring the impact of a typical local sports event that prior studies could not measure well because they focused on large "mega-events." Whether the event is rare or not, the methods section should include an explanation of the following characteristics of the event: a) when did it take place; b) what were the underlying circumstances leading to the event; and, c) what were the consequences of the event in relation to the research problem.

If your subject of analysis is a person. Explain why you selected this particular individual to be studied and describe what experiences they have had that provide an opportunity to advance new understandings about the research problem. Mention any background about this person which might help the reader understand the significance of their experiences that make them worthy of study. This includes describing the relationships this person has had with other people, institutions, and/or events that support using them as the subject for a case study research paper. It is particularly important to differentiate the person as the subject of analysis from others and to succinctly explain how the person relates to examining the research problem [e.g., why is one politician in a particular local election used to show an increase in voter turnout from any other candidate running in the election]. Note that these issues apply to a specific group of people used as a case study unit of analysis [e.g., a classroom of students].

If your subject of analysis is a place. In general, a case study that investigates a place suggests a subject of analysis that is unique or special in some way and that this uniqueness can be used to build new understanding or knowledge about the research problem. A case study of a place must not only describe its various attributes relevant to the research problem [e.g., physical, social, historical, cultural, economic, political], but you must state the method by which you determined that this place will illuminate new understandings about the research problem. It is also important to articulate why a particular place as the case for study is being used if similar places also exist [i.e., if you are studying patterns of homeless encampments of veterans in open spaces, explain why you are studying Echo Park in Los Angeles rather than Griffith Park?]. If applicable, describe what type of human activity involving this place makes it a good choice to study [e.g., prior research suggests Echo Park has more homeless veterans].

If your subject of analysis is a phenomenon. A phenomenon refers to a fact, occurrence, or circumstance that can be studied or observed but with the cause or explanation to be in question. In this sense, a phenomenon that forms your subject of analysis can encompass anything that can be observed or presumed to exist but is not fully understood. In the social and behavioral sciences, the case usually focuses on human interaction within a complex physical, social, economic, cultural, or political system. For example, the phenomenon could be the observation that many vehicles used by ISIS fighters are small trucks with English language advertisements on them. The research problem could be that ISIS fighters are difficult to combat because they are highly mobile. The research questions could be how and by what means are these vehicles used by ISIS being supplied to the militants and how might supply lines to these vehicles be cut off? How might knowing the suppliers of these trucks reveal larger networks of collaborators and financial support? A case study of a phenomenon most often encompasses an in-depth analysis of a cause and effect that is grounded in an interactive relationship between people and their environment in some way.

NOTE:   The choice of the case or set of cases to study cannot appear random. Evidence that supports the method by which you identified and chose your subject of analysis should clearly support investigation of the research problem and linked to key findings from your literature review. Be sure to cite any studies that helped you determine that the case you chose was appropriate for examining the problem.

IV.  Discussion

The main elements of your discussion section are generally the same as any research paper, but centered around interpreting and drawing conclusions about the key findings from your analysis of the case study. Note that a general social sciences research paper may contain a separate section to report findings. However, in a paper designed around a case study, it is common to combine a description of the results with the discussion about their implications. The objectives of your discussion section should include the following:

Reiterate the Research Problem/State the Major Findings Briefly reiterate the research problem you are investigating and explain why the subject of analysis around which you designed the case study were used. You should then describe the findings revealed from your study of the case using direct, declarative, and succinct proclamation of the study results. Highlight any findings that were unexpected or especially profound.

Explain the Meaning of the Findings and Why They are Important Systematically explain the meaning of your case study findings and why you believe they are important. Begin this part of the section by repeating what you consider to be your most important or surprising finding first, then systematically review each finding. Be sure to thoroughly extrapolate what your analysis of the case can tell the reader about situations or conditions beyond the actual case that was studied while, at the same time, being careful not to misconstrue or conflate a finding that undermines the external validity of your conclusions.

Relate the Findings to Similar Studies No study in the social sciences is so novel or possesses such a restricted focus that it has absolutely no relation to previously published research. The discussion section should relate your case study results to those found in other studies, particularly if questions raised from prior studies served as the motivation for choosing your subject of analysis. This is important because comparing and contrasting the findings of other studies helps support the overall importance of your results and it highlights how and in what ways your case study design and the subject of analysis differs from prior research about the topic.

Consider Alternative Explanations of the Findings Remember that the purpose of social science research is to discover and not to prove. When writing the discussion section, you should carefully consider all possible explanations revealed by the case study results, rather than just those that fit your hypothesis or prior assumptions and biases. Be alert to what the in-depth analysis of the case may reveal about the research problem, including offering a contrarian perspective to what scholars have stated in prior research if that is how the findings can be interpreted from your case.

Acknowledge the Study's Limitations You can state the study's limitations in the conclusion section of your paper but describing the limitations of your subject of analysis in the discussion section provides an opportunity to identify the limitations and explain why they are not significant. This part of the discussion section should also note any unanswered questions or issues your case study could not address. More detailed information about how to document any limitations to your research can be found here .

Suggest Areas for Further Research Although your case study may offer important insights about the research problem, there are likely additional questions related to the problem that remain unanswered or findings that unexpectedly revealed themselves as a result of your in-depth analysis of the case. Be sure that the recommendations for further research are linked to the research problem and that you explain why your recommendations are valid in other contexts and based on the original assumptions of your study.

V.  Conclusion

As with any research paper, you should summarize your conclusion in clear, simple language; emphasize how the findings from your case study differs from or supports prior research and why. Do not simply reiterate the discussion section. Provide a synthesis of key findings presented in the paper to show how these converge to address the research problem. If you haven't already done so in the discussion section, be sure to document the limitations of your case study and any need for further research.

The function of your paper's conclusion is to: 1) reiterate the main argument supported by the findings from your case study; 2) state clearly the context, background, and necessity of pursuing the research problem using a case study design in relation to an issue, controversy, or a gap found from reviewing the literature; and, 3) provide a place to persuasively and succinctly restate the significance of your research problem, given that the reader has now been presented with in-depth information about the topic.

Consider the following points to help ensure your conclusion is appropriate:

• If the argument or purpose of your paper is complex, you may need to summarize these points for your reader.
• If prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the conclusion of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration of the case study's findings that returns the topic to the context provided by the introduction or within a new context that emerges from your case study findings.

Note that, depending on the discipline you are writing in or the preferences of your professor, the concluding paragraph may contain your final reflections on the evidence presented as it applies to practice or on the essay's central research problem. However, the nature of being introspective about the subject of analysis you have investigated will depend on whether you are explicitly asked to express your observations in this way.

Problems to Avoid

Overgeneralization One of the goals of a case study is to lay a foundation for understanding broader trends and issues applied to similar circumstances. However, be careful when drawing conclusions from your case study. They must be evidence-based and grounded in the results of the study; otherwise, it is merely speculation. Looking at a prior example, it would be incorrect to state that a factor in improving girls access to education in Azerbaijan and the policy implications this may have for improving access in other Muslim nations is due to girls access to social media if there is no documentary evidence from your case study to indicate this. There may be anecdotal evidence that retention rates were better for girls who were engaged with social media, but this observation would only point to the need for further research and would not be a definitive finding if this was not a part of your original research agenda.

Failure to Document Limitations No case is going to reveal all that needs to be understood about a research problem. Therefore, just as you have to clearly state the limitations of a general research study , you must describe the specific limitations inherent in the subject of analysis. For example, the case of studying how women conceptualize the need for water conservation in a village in Uganda could have limited application in other cultural contexts or in areas where fresh water from rivers or lakes is plentiful and, therefore, conservation is understood more in terms of managing access rather than preserving access to a scarce resource.

Failure to Extrapolate All Possible Implications Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings. If you do not, your reader may question the validity of your analysis, particularly if you failed to document an obvious outcome from your case study research. For example, in the case of studying the accident at the railroad crossing to evaluate where and what types of warning signals should be located, you failed to take into consideration speed limit signage as well as warning signals. When designing your case study, be sure you have thoroughly addressed all aspects of the problem and do not leave gaps in your analysis that leave the reader questioning the results.

Case Studies. Writing@CSU. Colorado State University; Gerring, John. Case Study Research: Principles and Practices . New York: Cambridge University Press, 2007; Merriam, Sharan B. Qualitative Research and Case Study Applications in Education . Rev. ed. San Francisco, CA: Jossey-Bass, 1998; Miller, Lisa L. “The Use of Case Studies in Law and Social Science Research.” Annual Review of Law and Social Science 14 (2018): TBD; Mills, Albert J., Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Putney, LeAnn Grogan. "Case Study." In Encyclopedia of Research Design , Neil J. Salkind, editor. (Thousand Oaks, CA: SAGE Publications, 2010), pp. 116-120; Simons, Helen. Case Study Research in Practice . London: SAGE Publications, 2009;  Kratochwill,  Thomas R. and Joel R. Levin, editors. Single-Case Research Design and Analysis: New Development for Psychology and Education .  Hilldsale, NJ: Lawrence Erlbaum Associates, 1992; Swanborn, Peter G. Case Study Research: What, Why and How? London : SAGE, 2010; Yin, Robert K. Case Study Research: Design and Methods . 6th edition. Los Angeles, CA, SAGE Publications, 2014; Walo, Maree, Adrian Bull, and Helen Breen. “Achieving Economic Benefits at Local Events: A Case Study of a Local Sports Event.” Festival Management and Event Tourism 4 (1996): 95-106.

Writing Tip

At Least Five Misconceptions about Case Study Research

Social science case studies are often perceived as limited in their ability to create new knowledge because they are not randomly selected and findings cannot be generalized to larger populations. Flyvbjerg examines five misunderstandings about case study research and systematically "corrects" each one. To quote, these are:

Misunderstanding 1 :  General, theoretical [context-independent] knowledge is more valuable than concrete, practical [context-dependent] knowledge. Misunderstanding 2 :  One cannot generalize on the basis of an individual case; therefore, the case study cannot contribute to scientific development. Misunderstanding 3 :  The case study is most useful for generating hypotheses; that is, in the first stage of a total research process, whereas other methods are more suitable for hypotheses testing and theory building. Misunderstanding 4 :  The case study contains a bias toward verification, that is, a tendency to confirm the researcher’s preconceived notions. Misunderstanding 5 :  It is often difficult to summarize and develop general propositions and theories on the basis of specific case studies [p. 221].

While writing your paper, think introspectively about how you addressed these misconceptions because to do so can help you strengthen the validity and reliability of your research by clarifying issues of case selection, the testing and challenging of existing assumptions, the interpretation of key findings, and the summation of case outcomes. Think of a case study research paper as a complete, in-depth narrative about the specific properties and key characteristics of your subject of analysis applied to the research problem.

Flyvbjerg, Bent. “Five Misunderstandings About Case-Study Research.” Qualitative Inquiry 12 (April 2006): 219-245.

• << Previous: Writing a Case Analysis Paper
• Next: Writing a Field Report >>
• Last Updated: Jun 3, 2024 9:44 AM
• URL: https://libguides.usc.edu/writingguide/assignments

How to Write a Killer Case Study Intro

The blinking cursor of death….

You’ve read the client brief, recorded the interview, and found the perfect case study template. Now you’re sitting in front of your computer with a strong cup of coffee (your most important writing tool), and you’re ready to crank out a killer case study.

But where do you begin?

Oftentimes, the hardest part of writing a case study (other than putting together the headline, which we’ll cover in another post) is just getting started. How do you find that perfect hook to pull in the reader?

In this article, you’ll learn about the only three things you need to create a perfect case study intro every time.

1. Make it personal

The first thing you need to remember is that your case study isn’t actually about the client you interviewed, nor is it about your company; it’s about your readers.

The goal of your case is to create a stirring testimonial that (A) your readers identify with, and (B) overcomes their pain points and objections. That means every sentence you write and every quote you include should be specially selected to win the hearts and minds of your audience.

So it should go without saying that understanding your readership is essential.

When you know your audience, you’ll be able to set the scene more provocatively. Describe your interviewee in such a way that it’s easy for your target reader to see themselves in, and then do the same with the challenges they faced.

DO NOT just rattle off the boilerplate company description for your client – you can let a sidebar description do that for you. Instead, dive right in by bringing the person inside of the organization – their goals, needs, frustrations and responsibilities – into the spotlight.

If your readers can visualize themselves with your solution, your case study is a success.

To make your intro more personal…

• Keep your exposition on the client’s company short and to the point; let the customer’s quotes and the sidebar do the heavy lifting.
• Describe your interviewee in a way that makes them relatable to your target audience.
• Elaborate on your client’s pain points and make them feel RAW; your readers are probably struggling with the same problems. Don’t settle for inspecific problems!

2. Make a promise your readers will care about

The intro to one of my favorite fairy tales reads, “Once upon a time there was a poor tailor who could barely feed his twelve children. When the thirteenth was born, the distraught man ran out to the road nearby determined to find someone to stand as godfather to the child.”

This intro succinctly establishes three things:

• An identifiable character (i.e. the poor tailor)
• Pain points (i.e. the tailor is poor)
• A narrative arc (i.e. what will happen to the child)

In writing your case study intro, you need to accomplish these three things as economically as the Brothers Grimm: identify your client, describe their challenges, and then promise to show off your results by study’s end.

Usually, you want to show off your most dramatic result in your headline, and then promise to reveal how you achieved that result in your intro. Your promise should be something your readers are interested in to spur them onward.

To weave a narrative into your intro…

• Write as if you’re telling a particularly captivating bedtime story—keep your language simple, and always keep the ‘plot’ moving forward.
• Tease your results, but don’t give them all away! It’s okay to use the headline to hammer home a huge stat that people will care about (the “so what?” of your study) – but keep in mind that the details will be just as juicy for those with the same problem.

3. Let your client do the talking (or: remember, this isn’t about YOU )

Nobody clicks on a case study to read ‘Company X’ drone on and on about how great they are. They came for the testimonials of your clients, so the sooner you get to good stuff, the better.

Importantly, that means this isn’t a monologue.

Best practice is to keep your intro short. You have 1-2 short paragraphs to set the scene and establish a problem, and then it’s time to hand the reins over to your interviewee. Try to interject as little as possible for the duration of your case study.

That said, your intro will have more exposition than any other part of your case study. Make sure you set up who the client is, why your readers should care about them, and what challenges they faced. Then it’s time to shut up and let your interviewee speak for themselves.

To cram more info into the fewest words possible…

• Only use exposition to set the scene and to glue quotes together into a cohesive narrative.
• Let your interviewee describe the challenges they faced in their own words.
• Make sure every interjection adds new info or moves the story forward; never just regurgitate your client’s words.

With just a bit of thinking and planning, you can get that intro locked and loaded, and get into the meat of the study where heroes are born and monsters are felled.

Just don’t trip on your way there.

Joel Klettke

Joel founded Case Study Buddy to bring companies an end-to-end partner in tackling the challenges of case studies and testimonials. He's passionate about seeing B2B companies systematize, scale, and reap the rewards of customer success stories.

Ya, you like that? Well, there’s more where that came from!

Should you send case study interview questions in advance.

Sending your case study interview questions to your interviewee in advance sounds like a no-brainer, doesn’t it? And certainly, if you type “should you send case study interview questions in advance” into Google, that’s the boilerplate advice everyone gives. But is that truly good advice? Or does it depend on the situation? At Case Study Buddy, we’ve conducted (literally) hundreds and hundreds of case study interviews, and we’re continually testing new and better ways of conducting them. And the answer...

Best AI Case Study Examples in 2024 (And a How-To Guide!)

Who has the best case studies for AI solutions? B2B buyers’ heads are spinning with the opportunities that AI makes possible. But in a noisy, technical space where hundreds of new AI solutions and use cases are popping up overnight, many buyers don’t know how to navigate these opportunities—or who they can trust. Your customers are as skeptical as they are excited, thinking… “I’m confused by the complexity of your technology.” “I’m unsure whether there’s clear ROI.” “I’m concerned about...

How to Write Cybersecurity Case Studies

When it comes to case studies, cybersecurity poses special challenges.  The cybersecurity landscape is saturated with solutions—and so sales and marketing teams have never been hungrier for customer success stories they can share as proof of their product’s abilities. But cybersecurity clients are very reluctant to be featured. They don’t want to talk about the time they almost got hacked, they don’t want to disclose the details of their setup and risk more attacks, and they just plain don’t want...

Let’s tell your stories together.

Get in touch to start a conversation.

🎉 Case Study Buddy has been acquired by Testimonial Hero 🎉  Learn more at testimonialhero.com

Your competitors are optimizing their content. Are you?

✅ Analyze competitor strategies ✅ Plan a path to topical authority ✅ Find profitable keywords ✅ Create winning content ✅ Scale content strategy with AI ✅ Keep old content ranking ✅ Get more organic traffic

Don’t miss out. Join 150k+ Agencies, Marketers, and SEOs.

How To Write A Case Study [Template plus 20+ Examples]

In an era where every niche seems completely saturated, learning how to write a case study is one of the most important time investments you can make in your business.

That’s because case studies help you present a compelling story of success to bottom-of–funnel decision makers. Do it right, and a solid case study can greatly increase your chances of closing new deals.

A 2023 study from the Content Marketing Institute found that 36% of B2B marketers consider case studies to be effective tools for converting prospects into customers.

In this article, I’ll show you step-by-step exactly how to write a case study that makes an impact. Along the way, I’ll highlight several stellar case studies that illustrate how to do it right.

What you will learn

• What a case study is and what it's not.
• How an effective case study can help establish you as an expert and land more clients.
• How to choose the right topic for your case study, taking into account client successes and broad appeal in your customer's industry.
• The essential parts of a good case study and how to write each one.
• Style and formatting points that will make your case study stand out for readers to understand.
• 4 tips for conducting an effective client interview.
• 6 real-life case studies that you can use as examples for creating your own customer stories.

What is a case study?

A case study is a detailed story about how your products or services helped a client overcome a challenge or meet a goal. Its main purpose is to prove to potential customers that you understand their problems and have the experience and expertise to help solve them.

But, even though a case study can help you attract and win customers, it's not just an advertisement for your offerings.

In truth, your company shouldn’t even be the main focus of a good case study.

Instead, a winning case study follows a successful business transformation from beginning to end and shows how you made it all possible for your client.

An example of a case study that conveys a strong customer story is the deep dive we did into how ClickUp used SurferSEO to boost their blog traffic by 85% in a year.

Why you should write a case study

The most obvious reason why you should write a case study is that it's a great way to show potential customers how others in their position have benefited from your product or service.

Here are a few of the key benefits of writing a case study, all of which can help you turn readers into customers.

Demonstrates expertise 

A well-written case study shows clearly how your company solved a complex problem or helped a particular customer make improvements using your solution.

This is the sort of expertise other potential clients will look for when they run into the same sort of issues.

For instance, one of CrowdStrike's case studies shows how they helped Vijilan scale its logging capacity so they could stop turning away business.

This positions CrowdStrike as experts in helping deal with log management issues.

Other companies dealing with their own logging problems will definitely find this to be a compelling story. And you can bet CrowdStrike will be on their short list of potential solution providers after reading this case study.

Educates potential customers 

You might have the best product on the market, but it won't do you any good if potential clients don't understand how it might help them.

A case study breaks down those barriers by showing real-life examples of your product in action, helping other customers solve their problems.

A good example is the Trello case study library .

Each story gives detailed examples showing how the customer uses Trello and includes actual screenshots from their workflows.

Here is an interesting snapshot from the BurgerFi example.

Here, you get a glimpse of a live Trello board that BurgerFi uses to manage their marketing assets.

By showing how existing clients use your product, you make it a lot easier for future customers to imagine how it might work for their needs, too.

Generates leads 

A strong case study is a valuable piece of content that provides insights and can help companies make decisions.

Many of them would be happy to give you their contact information in exchange for the chance to read about potential solutions to their problems.

That combination of valuable content and a hungry market makes case studies great tools for lead generation.

You can either gate part of your case study and leave the rest of it public, or require an email address and other contact information in order to download the full study.

That's the approach Pulsara took in detailing how their telehealth communication platform helped EvergreenHealth improve efficiency:

The names and addresses you collect with this approach will be about as warm as you could ever hope for since they probably have the same sort of problems you solved in your case study.

Along the same lines, case studies can be extremely effective in upselling or cross-selling other products to the decision-makers who read them.

And they are great tools for persuading a client to make a purchase with you.

Indeed, a great case study can often be the "final straw" that lands you a client considering your services.

A 2023 survey by Uplift Content , for example, found that 39% of SaaS marketers ranked case studies as being very effective for increasing sales.

That made it their #1 tactic for the second year in a row.

Builds trust 

Potential clients want to know that they can trust you to handle their business with care and to deliver on your promises.

A case study is the perfect vehicle to show that you can do just that.

Take advantage of that opportunity to present statistics, client testimonials, graphics, and any other proof that you can get results.

For example, in their case study about helping a law firm uncover critical data for a tricky case, Kroll shows us just how much they were able to cut through the noise:

Any law firm staring at its own pile of documents to search through would love to have that haystack reduced by a factor of 32.5x, too.

And Sodexo makes good use of customer testimonials in their case studies, like this quote from the procurement lead for a Montana mining company.

Having existing customers tell the world that they count on you is powerful free advertising and builds trust with your readers. That can help transform them into customers down the road.

Provides social proof 

You can also use your case study to show that your product or service works in a specific industry.

Real-world examples of customer success stories position you as someone their peers and competitors can turn to, too.

For instance, Stericycle details how they helped seven children's hospitals get a handle on their "sharps" management:

They also include glowing quotes from hospital leaders in the same study.

Other hospitals looking for help in disposing of their hazardous waste will know right away after reading this study that Stericycle understands their needs.

This is the type of social proof that can really help establish you as a go-to solution for the industries you serve.

How to choose a subject for your case study

In order to get the most bang for your buck from your case study, you need to make sure you pick a topic that resonates with your target audience. And one that can make your solution look its best.

Below are 4 ways to select the best subject for your case study.

1. Choose a popular topic

Make sure the topic you tackle in your case study is one that most of your potential clients are searching for.

You may be tempted to highlight an unusual project that you find especially interesting. But that usually won't have the same sort of selling power as a topic with more broad appeal.

For instance, Aruba Networks has helped colleges and universities with all sorts of networking projects. Some of those involve really fascinating edge cases like research labs, esports arenas, and other innovative solutions.

But what most schools are looking for in a network upgrade is improving connectivity across campus while enhancing security and saving money.

Those are exactly the outcomes Aruba focuses on in its Doane University case study .

Remember that your case study is likely to be read by decision-makers at the bottom of the sales funnel who are ready to buy.

Your content needs to resonate with them and address the questions they want answered in order to make their decision.

Aruba tackles their customers' concerns head-on throughout the Doane study, as you can see from their section headings:

• "Realizing a hyper-connected vision"
• "10X throughput eliminates academic barriers"
• "More secure with less effort"
• "Greener and more resilient at better insurance rates"

College administrators can see at a glance that Aruba understands their needs and has helped other institutions with similar problems.

2. Consider relevance and attractiveness

Although you want to choose a popular subject for your case study (as discussed above), it's also important to make sure it's relevant to your target audience.

For instance, if you provide design services, a one-off project you did to help a local company set up its website might have taught you a lot. But most of your potential readers will be much more interested in reading about how your designs helped that client improve brand perception.

It’s also best to choose a situation where your product or service is used in a way that you expect most potential users to adopt. 

For example, Allegion's Mount Holyoke case study (PDF) details how one campus used their products to move to contactless and mobile entry systems.

Students today demand more control over their physical security than ever before. And the administrative overhead of managing thousands of doors and physical keys on a college campus is enormous.

As a result, most schools are interested in using technology to enable their students and reduce staffing costs.

Allegion hits those points dead-on with this case study.

An added benefit of choosing a topic with broad appeal among your target client base is that you can use the content in your normal distribution channels.

For example, you can publish all or part of it as a blog post, include it in your newsletter, or use it as the basis for a YouTube video. Wherever your audience is, that's probably a good place to promote your case study.

3. Identify a 5 star use case

A case study is like a sales executive for your company.

It needs to show your product or service in the best possible light and highlight its features and benefits while distinguishing it from other products.

Choose a client example that really makes your solution look like a superstar and showcases its most outstanding attributes.

You should also avoid showing your product or service being used in a novel or completely innovative way. While that can provide some solid insight, you risk alienating your typical client who needs to know that you can solve their specific problem.

Instead, your case study should demonstrate how your solution took on a common industry problem and delivered stellar results.

A great example is Beckman Coulter's case study that details their work with Alverno Labs.

The objective was to reduce the time it took Alverno to deliver lab test results while reducing operating costs, which are common goals for many testing labs.

The case study presents a detailed description of how Beckman Coulter implemented a continuous improvement process for Alverno. They enhance the discussion with several meaty visuals like this project roadmap:

They also include plenty of tangible data to prove their success.

And of course, include direct client testimonials:

From top to bottom, this case study proves that Beckman Coulter understands their customers business needs and can offer top-notch solutions.

4. Find a satisfied customer

You're going to need input from your client in order to build the most complete and accurate case study that you can.

So when you're trying to choose a customer story to use, look for a client who is happy to share their positive experience working with you.

Try to find one who seems genuinely eager to talk so that they will be timely with their responses to your questions.

If you have a customer who is willing to sit down for an actual interview with you, they're a great candidate. You'll get answers quickly, and the client is obviously comfortable enough with your relationship to talk with you directly.

A good example that focuses on a satisfied client comes from Aerofloat, an Australian wastewater treatment company.

In their Norco Food Case Study , Aerofloat reports that Norco hired them for additional projects as a result of their successful prior engagement:

It's always good to show prospective clients that your existing customers stick with you.

So try to pick a case study done in collaboration with a current client, not one from the past.

Aerofloat also highlights their ongoing relationship with Norco by also including them in the customer list on their About page:

How to write a case study

Now that we’ve covered the benefits of writing a case study and figured out how to pick the best topic for your situation, it’s time to get down to the business of writing.

Below is a rundown of the sections that make up the structure of a typical case study. For each piece, I’ll show you what types of content you should include and give you an example of a study that does it right.

Here are 8 tips to writing a case study.

1. Attention grabbing title

The title of your case study needs to grab potential readers attention and convince them that this is a valuable piece of content.

Make your title catchy, concise, and descriptive, just like you would for a good blog post. But you also need to make sure you give your readers a clear idea of what the case study is about.

Offer them at least a hint of the type of results you were able to deliver, too.

It’s a good idea to use numbers here – the higher, the better. It's especially effective if you can show how quickly you got results and how much money your client saved or made as a result of working with you.

Our ClickUp case study that I mentioned earlier is a good example. The full title is

SurferSEO Helps ClickUp Publish 150+ Articles And Achieve Blog Traffic Growth of 85% in 12 Months.

Here are some other case studies that make effective use of numbers in their titles:

• Healthcare Administrative Partners Increases Online Patient Payments by 20% in Two Months
• Case Study: Taylor Kotwa, Sprinter, Increases FTP 7% in 4 months
• Case Study: Lakeview Farms Reduced Downtime by 36% in 6 Months
• CASELY case study: Improved first response time by 10x while experiencing 16,954% growth

This type of headline gives potential clients a sense that you will work with urgency to improve their bottom-line results.

2. Hook readers in your introduction

The introduction of your case study should set the stage for the comprehensive narrative that follows.

Give a brief description of the problem for context and quickly introduce the customer's story. Touch on the results you helped them achieve, but don't go overboard on details.

Overall, the introduction should give your reader just enough information to keep them engaged and ready to move into the heart of the case study.

It should also establish that they're in the right place and that you are the right person to be telling this story.

This case study about the cybersecurity program at Investors Bank includes a solid example of an effective introduction:

3. Highlight the challenge

This section should clearly outline the problem or challenge that your customer is facing.

Help your readers understand why a solution was necessary, and why that specific pain point was bothering the client. 

And, since this is the entire motivation for the project in the first place, don't skimp on details.

For instance, one of Verkada's case studies explains why maintaining security cameras is a huge challenge for Crystal Mountain Resort in Washington state. They start off with a direct quote from the resort's IT director:

The elevation tops out at a little over 7,000 feet, so the weather conditions can get extreme. We needed durable cameras capable of handling everything from snowstorms to 100 MPH winds.

That makes it crystal clear what sort of problem Crystal Mountain was facing.

The case study then adds more detail with separate subsections about hardware durability, image quality, and cumbersome footage retrieval.

By the time they finish reading this section, your readers should have no doubt about what the problem is and why a solution is needed.

4. Solve their problem

The solution section is one of the most important parts of a case study.

This is your chance to describe how your product or service provided a solution to the problem or challenge your client was having.

It's where you can really start to make a connection with potential new clients by showing them that you understand the issue at hand.

First, provide some details about how you analyzed the situation. The Kroll case study on handling critical legal data mentioned earlier does a great job of this with bullet points describing their research process.

This type of analysis helps build confidence that you take a thorough approach to your engagements and are looking out for your clients best interests.

Now you can move on to describe the solution you and your client chose based on your investigation.

In their legal case study, Kroll determined that the best solution involved digitizing thousands of paper documents and using AI to analyze more than a million documents.

Kroll describes in detail how they used their RelativityOne system to achieve those goals:

This level of detail helps prospective customers better understand the root cause of their problems and positions you as the right company to solve them.

5. Showcase your results

The results section is all about proving that you can actually deliver on the promise of your proposed solution. Go heavy on the details here, too, and make sure your readers understand the results you achieved.

Wherever possible, use specific numbers and data points to show exactly how effective your solution was for your client.

A good example is this BetterBricks case study showing how they helped an aerospace company slash energy costs.

They distilled their bottom line results into a simple table:

The text of the study then goes into more detail about what these numbers mean, but this quick graphic lets readers know right away the scope of the results achieved.

Here is a sampling of BetterBrick’s more detailed explanation of their results in this case:

This is your place to really crow about the success you achieved with your client, so make it as obvious as possible just how impactful you were.

6. Use multimedia well

One way to make a lasting impression on potential clients is to include relevant visuals throughout your case study.

Graphs, screenshots, and product photos help break up the text and make your study more engaging overall.

But they can also add details to your story and make a memorable visual impact beyond what mere words can accomplish.

We got a taste of that with the table of results in the BetterBricks example above, but that's just the start.

Inrix is a good example of a company that loads up its case studies with insightful and engaging media to tell a better story.

For instance, in their breakdown of a collaboration with the Pennsylvania Department of Transportation (DOT), Inrix uses charts, tables, and graphs throughout.

One innovative example is this diagram about crash distances:

This really brings the idea to life in a way that words alone can't, and it's likely to stick with readers long after they've clicked off the case study.

Other types of media that companies use to good effect in their case studies include pictures of key client stakeholders, interactive charts, tables, and simple graphs.

You can see in this high-level overview that Inrix includes most of these in their Pennsylvania DOT case study:

You can even use video to demonstrate your solution or to share a client testimonial.

If possible, include direct quotes from your client to add authenticity to the case study.

This will show potential customers that you and your existing client have a good relationship and that they value your work.

It’s pretty compelling stuff to have a ringing endorsement like this one from an EnergyCAP case study , to show your readers:

You can place customer quotes throughout the case study to highlight important points, and you should definitely try to include at least one that shows overall customer satisfaction.

Chances are you have some of these quotes already in the form of testimonials or as part of the customer interview you conducted in preparing for your case study (more on that later).

You can use those quotes here if they fit the context of your case study.

That will save time and red tape for both you and your client since they'll be reviewing your final case study before it goes live anyway.

8. Conclusion

The conclusion should summarize the key points of the case study and reinforce the success of the solution. It could also include a call to action, encouraging readers to try your product or service or to get in touch for more information.

You might also include information about future plans with the client to reinforce the idea that your relationship is strong and ongoing.

That's the approach that Gravitate Design used in their case study about helping GoBeyond with their bounce rates and time on page:

Like the introduction, the conclusion section of a case study should be short and sweet, giving just enough detail to make the reader want to hear more from you.

Checklist for case studies

Beyond the story that you want to tell in your case study, you also need to pay attention to several other factors. Indeed, the layout and format of your study can have a big impact on how effective it is at keeping your readers engaged and delivering your message.

Here is a quick checklist for creating case studies.

Break up the text with headings and subheadings

Big blocks of text can be intimidating and make it tough for your audience to stay on track.

In contrast, a case study with clear headings and subheadings throughout breaks up the story and gives readers visual clues about what's coming.

This also makes the case study easier for readers to scan and helps you keep each section focused on a single idea.

Use bullet points for lists or key points

Along the same lines, bullet points let you present important information in small bits that are easy for readers to digest.

Some of the best uses of bullet points include:

• A series of facts or tips
• A list of product features or benefits
• A quick summary of results
• Steps in a how-to procedure
• A rundown of multiple statistics

For these bite-sized hunks of detail, bullets often make for a much cleaner and readable list than jamming all the information into a single paragraph. 

Bullet point lists also make great quick references for readers to come back to later.

Highlight key points with bold or italic text

Bold and italic text draws the reader’s eyes to the words you highlight, which lets you really drive home key ideas in your case study.

You can use this technique to introduce new terms, place emphasis on a sentence, and showcase important parts of your approach or results.

Like bullet points, bold and italic text also give readers a visual anchor for reference as they’re working through your document.

Make paragraphs short and to-the-point

Aim for 3-4 sentences per paragraph to keep the text readable and engaging. Each paragraph should focus on one main idea to support the subject of the section it’s in.

Using short paragraphs tells readers at a glance that there are break points throughout your case study and helps keep them engaged.

Keep consistent length across the case study 

Throughout all parts of your case study, try to cover your main points in detail without overwhelming the reader.

Your potential clients are there to find a possible solution to their problems, not to read a novel.

Give them an inviting document structure and then lead them through each section with clear explanations and no fluff.

Adjust the length based on the complexity of the subject 

The flip side of the tip above about keeping your case study tight and focused is that you need to make sure you cover your topic in detail.

Very complex topics will require more explanation and longer overall case studies than simpler subjects.

For example, a case study about paving a church parking lot might be pretty short.

But a story about implementing a comprehensive information security program for a state government will likely be much longer and more detailed.

Include a summary with some takeaways 

At the end of your case study, summarize the key takeaways and results to reinforce the message you’re trying to get across.

Briefly recap the problem your client was facing, the solution you came up with, and the results you achieved. Think of this as an executive summary that gives business leaders the TL;DR version of your customer’s success story.

Content Snare includes an eye-catching summary in the case study detailing their efforts to grow their email list:

The overall goal is to leave potential clients with a good last impression and invite them to contact you with questions.

Use visuals to break up text and illustrate points

As we saw in the "How to write a case study" section above, graphs, charts, or images can make your case study more engaging and help illustrate key ideas or results. They also add visual variety and help break up the monotony of text-heavy studies.

Use these types of visuals to help keep your readers interested and make your story more complete.

Below is a high-level view of a portion of Advanced HPC’s Philips case study , which does a great job of incorporating the points in this section. It pulls together all the visual elements to create a very appealing reader experience.

4 tips to create an effective case study

You’re going to need your customer’s input in order to craft the most effective case study possible. It’s their story, after all, and they’re the ones who know what it was like to work with you throughout the process.

They also hold key details that you probably don’t know.

So, once you have their permission to write about the project, you’ll need to talk to them about the specifics. But you also want to respect their time.

Here are 4 tips on how to conduct an interview for your case study.

Prepare questions in advance

Know what information you need and prepare questions to pull that information from your client.

Doing this in advance will help you formulate the questions and sequence them properly to avoid bias and wasting time.

Have a few follow-up or emergency questions ready, too, in case you run into a dead end. 

Record the interview

With your client’s permission, record the interview to ensure accuracy and so you can come back to listen to important points again.

This helps you avoid bothering your clients with follow-up questions and also gives you more freedom to let the interview evolve in a natural conversational manner. 

Make the interviewee comfortable

Explain the interview process to your client, why you're asking them to talk, and how the information will be used. Remember that you are the one who “needs” the case study, not them. 

So you go the extra mile to ensure that your guest is as comfortable as possible.

That also means being flexible with the format of your interview.

If your client doesn’t have time for calls, offer to trade voice notes. Or give them a shared Google document for trading questions and answers.

And if you do end up conducting a live interview, agree to meet at a time that’s best for them.

No matter how you end up conducting your interview, make it clear that your client will be able to review the final version before you make it live.

Give them veto power over any of the information you put together.

Ask open-ended questions

Even though you’ll start out with a series of questions you need answered, don’t limit yourself to those. Instead, encourage your interviewee to share their story in their own words. 

Leave some room to ask open-ended questions and let the conversation evolve naturally.

Here are a few examples of the types of questions for discussion:

• What would you do differently if you were starting this project again?
• What do you think about XYZ emerging technology in relation to your industry's challenges?
• What sorts of other projects do you think Acme's solution might help with?
• How do your company's day-to-day operations and needs from how the relevant theories describe the industry?

Especially if you’re recording the interview, as suggested above, you can go back later and put things in a logical order.

Once you have all of the raw material, then you can curate the information and edit it to come up with your final product.

6 case study examples to follow

Now that you know what makes a great case study and how to write one, let's finish up with a few more top-notch business case study examples.

Each of the case studies below hits many of the points in this article, but they all take a different approach. Use them for inspiration or when you need a little refresher on how to write a case study.

This case study provides a detailed account of how Monograph, a B2B SaaS company, improved its marketing projects and reporting using Databox.

It's a pretty straightforward example of the best practices we've discussed in this article, with an introduction followed by background information on the company (Monograph) and the challenges they faced with manual tracking of each data point.

It describes the solution that Databox helped put in place and then shows clear evidence of the results their customer achieved:

Case studies don't come much more textbook than this one, which makes it a great example to follow.

Growth Design on Airbnb

Growth Design takes a totally unique approach to case studies, each one is an online comic book!

Read through their case study about Airbnb , though, and you'll see that it meets all the criteria for a complete case study even if the setup is a little different than most.

Here is a look at the landing page for this beauty of a study.

The author starts out with a problem: the need to book a place to stay in a foreign country in a hurry. So he heads to Airbnb but ends up overwhelmed by choices and bounces to Google Maps to make his reservation.

He concludes that Airbnb was not the full solution for him in this case and suggests several places they could make improvements.

It's a pretty neat dive into a well-known user experience, and it's also a great lesson in how to use visuals to keep your readers engaged in your case study.

This case study about how Grubhub used Webflow to build a viral marketing campaign hits you with stunning results right off the bat.

From there, the study tells the full story of how they achieved these results. Even though the author doesn't explicitly break out the problem, solution, and results sections, she still takes the reader through that journey.

It's a concise but complete story broken up by a few choice graphics.

This case study dives into how Employment Hero uses Slack to keep their remote employees engaged and productive as the company grows.

It details how Employee Hero continuously reevaluates its app usage to identify possible solutions to issues that arise and how Slack consistently helps meet the challenges.

This case study is a great example of picking a use case that is relevant to most of Slack's user base -- improving communication and productivity among remote employees.

Slack also makes effective use of quotes from the decision makers at Employment Hero.

We already talked about our ClickUp case study a little earlier in this article, but it's worth a deeper look as an example to help guide your writing.

As you would expect, this case study hits main points we've covered here: problem statement, solution, and results.

But there are a couple of "extras" that make this one stand out.

For starters, it doesn't just present a single solution. It presents three , each one addressing a different aspect of ClickUp's objectives and each one showcasing a different Surfer feature set. 

For example, solution #1 describes how ClickUp improved their on-page SEO with the help of Surfer’s Content Editor . 

This case study also provides a high-level view of ClickUp’s project management processes and describes how they incorporated Surfer into their content workflows.

It’s a really instructive example of how you can use a case study to help prospective clients envision how your product might fit their situation.

Zoom’s library

This one isn't a single case study at all but a library full of case studies designed to help potential clients understand how Zoom can benefit them.

Here you'll find stories about how very recognizable organizations like Capital One, Vox Media, and the University of Miami are using Zoom to boost connectivity and productivity among remote workers.

There are plenty of good examples here that you can consult when you get stuck writing your own case study.

And the entire library is a great example of using case studies to demonstrate expertise with the help of social proof:

The Zoom case study library also makes liberal use of video, which might give you some good ideas about how you can, too.

Key takeaways

• Case studies are one of the best ways to generate leads and convert readers into customers.
• By showcasing the success you've had helping previous customers, case studies position you as an expert in your field.
• Good case studies can be the final push businesses need in their decision making process to buy your products or services.
• Pick a use case for your study that has broad appeal in your industry and that showcases your products and services in the best light possible.
• Effective case studies follow a predictable format: introduction, problem statement, solution, results, and conclusion.
• Make your case studies as readable as possible by including visual elements like graphs and images, and by breaking up the text into smaller sections, subsections, and concise paragraphs.
• Be as thorough and accurate as possible by conducting client interviews to gather background information for your case studies.
• Follow top-notch case studies for inspiration and ideas about how to make your own case studies as good as possible.

A well-written case study shines a light on your products and services like nothing else and helps position you as an expert in your field.

By showing that you understand their problems and have helped others overcome similar issues, you can prove to prospective clients that you are well-suited to help them, too.

Use the step-by-step instructions in this article to craft a case study that helps you and your company stand out from the competition.

https://surferseo.com/blog/write-case-study/

7-day Money-Back Guarantee

Choose a plan that fits your needs and try Surfer out for yourself. If you won’t be satisfied, we’ll give you a refund (yes, that’s how sure we are you’ll love it)!

How to Write a Case Study: Step-by-Step Guide with Examples

• October 7, 2022

Content Manager at SocialBee

Why is learning how to write a case study so important?

Well, because it provides your customers with social proof and supporting evidence of how effective your products and services are. Moreover, it eliminates the doubt that usually makes clients give up on their next purchase.

That is why today we are going to talk about the step-by-step process of writing a case study . We prepared five business case study examples guaranteed to inspire you throughout the process.

Let’s get started!

What Is a Case Study?

A case study is a piece of content that focuses on a case from your business history. It describes the problems your client faced and the solutions you used to help them succeed.

The goal of a writing case study is to promote your business , so your aim should be to put together a compelling story with evidence that backs up all your claims.

Case studies use real-life examples to show your clients the quality and effectiveness of your products and services. It’s a marketing tool that provides credibility and it helps your potential clients gain confidence in your brand.

Case studies can be structured in different formats:

• A written document
• An infographic
• A blog post
• A landing page

Case Study Benefits

A great case study makes your potential customers want to benefit from the products and services that helped your client overcome their challenges. 

Here are the benefits of writing a case study:

• It is an affordable marketing practice
• It decreases the perceived risk of your potential clients
• It provides transparency
• It builds trust and credibility among prospective customers
• It makes your potential clients relate to the problem
• It provides your potential clients with a solution for their problems

How to Write a Case Study

Now that you know what a case study is, let’s get into the real reason why you are here — learning how to write an in-depth study.

Here is the step-by-step process of writing a case study:

• Identify the topic of your case study
• Start collaborating with a client
• Prepare questions for the interview
• Conduct the case study interview
• Structure your case study 
• Make it visual

Step 1: Identify the Topic of Your Case Study

A case study starts with a strategy. Choosing what you want to write about should be closely related to your business needs. More specifically, what service or product do you want to promote through your case study?

Because case studies focus on client challenges, business solutions, and results, you have to carefully pick the case that your potential clients will relate to the most. 

To communicate the benefits of your business, you should focus on a customer story that appeals to a specific segment of your audience . Consequently, you will target clients that relate to your customer example while providing a solution for their needs and pain points — your products and services.

Start by focusing all your research methods on identifying your customers’ main pain points. Then find examples of how your products or services have helped them overcome their challenges and achieve their goals .

Furthermore, to make sure you choose the best case study topic for your buyer persona , you should have a meeting with your sales/customer service team. Because they are in close contact with your customers, they will be able to tell you:

• The main challenges your clients face 
• The services/products that bring them the best results 

These are the main two pieces of information you want your case study to focus on.

Step 2: Start Collaborating with a Client

With a clear topic in mind, you have to find the best fit for your case study. 

However, that is not all. First, you must obtain the client’s permission. After all, your business story is theirs too.

So, craft an email to provide your client with an overview of the case study. This will help them make a decision. 

Your message should include:

• The case study format (video, written, etc.) and where it will be published (blog, landing page , etc.)
• The topic of the document
• The timeline of the process
• The information that will be included
• The benefits they get as a result of this collaboration (brand exposure, backlinks)

Additionally, you can offer to schedule a call or a meeting to answer all their questions and curiosities and provide a means for clear and open communication.

Once you receive a positive response from your client, you can continue with the next step of the process: the actual interview.

PRO TIP: A great way to ensure a smooth and safe collaboration between you and your client is to sign a legal release form before writing the case study. This will allow you to use their information and protect you from issues that may occur in the future. Moreover, if the client is not comfortable with revealing their identity, you can always offer them anonymity.

Step 3: Prepare Questions for the Interview

Now that you have the subject for your case study, it’s time to write and organize your interview in several sets of questions.

Don’t forget that the whole structure of your case study is based on the information you get from your customer interview.

So pay attention to the way you phrase the questions. After all, your goal is to gather all the data you need to avoid creating a back-and-forth process that will consume your client’s time and energy.

To help you create the best questionnaire, we created a set of case study questions and organized them into different categories. 

Here are the five main sections your case study interview should contain:

• The client’s background information
• The problem
• The start of the collaboration
• The solution
• The results

A. The Client’s Background Information

This part of the case study interview must give a comprehensive look into your customer’s business and allow your readers to get to know them better.

Here are some question ideas:

B. The Problem

Now it’s time to get into the reason your client came to you for assistance, the initial challenge that triggered your collaboration.

In this part of the interview process, you want to find out what made them ask for help and what was their situation before working with you.

You can ask your client the following case study questions:

C. The Start of the Collaboration

This part of the case study interview will focus on the process that made your collaboration possible. More specifically, how did your client research possible collaboration opportunities, and why they chose your business? 

This information will not only be informative for your future customers but will also give you a behind-the-scenes look into their decision-making process.

D. The Solution

It’s time to get into one of the most significant parts of the case study interview — the solution. Here you should discuss how your services have helped their business recover from the problems mentioned before.

Make sure you ask the right questions so you can really paint the picture of a satisfied customer.

Have a look at these question examples:

E. The Results

The best proof you can give to your customers is through your results. And this is the perfect opportunity to let your actions speak for themselves.

Unlike the other marketing strategies you use to promote your business, the content is provided by your customer, not by your team. As a result, you end up with a project that is on another level of reliability.

Here is how you can ask your client about their results:

Step 4: Conduct the Case Study Interview

Now that you have a great set of case study questions, it’s time to put them to good use.

Decide on the type of interview you want to conduct: face-to-face, video call , or phone call. Then, consult with your client and set up a date and a time when you are both available. 

It should be noted that during the interview it’s best to use a recording device for accuracy. Maybe you don’t have time to write down all the information, and you forget important details. Or maybe you want to be focused more on the conversational aspect of the interview, and you don’t want to write anything down while it’s happening.

Step 5: Structure Your Case Study 

The hard part is over. Now it’s time to organize all the information you gathered in an appealing format. Let’s have a look at what your case study should contain.

Here are the components of a case study:

• Engaging title
• Executive summary
• Client description 
• Introduction to the problem
• The problem-solving process
• Progress and results

A. Engaging Title

Putting that much work into a project, it would be a shame not to do your best to attract more readers. So, take into consideration that you only have a few seconds to catch your audience’s attention. 

You can also use a headline analyzer to evaluate the performance of your title.

The best case study titles contain:

• Relevant keywords
• Customer pain points
• Clear result

Case study example :

B. Executive Summary

Your executive summary should include a thesis statement that sums up the main points of your case study. Therefore, it must be clear and concise. Moreover, to make your audience curious, you can add a statistic or a relevant piece of data that they might be interested in.

Here is what you should include in your executive summary:

• The business you are writing about (only if the clients wants to make themselves known)
• Relevant statistics

C. Client Description 

Here is where you start to include the information you gained from your interview. Provide your readers with a clear picture of your client and create a context for your case study.

Take your client’s answers from the “Client Background” section of the interview and present them in a more appealing format.

D. Introduction to the Problem

In this section, use your client’s interview answers to write about the problem they were experiencing before working with you.

Remember to be specific because you want your audience to fully understand the situation and relate to it. At the end of the day, the goal of the case study is to show your potential customers why they should buy your services/products.

E. The Problem-Solving Process

Next, explain how your service/product helped your client overcome their problems. Moreover, let your readers know how and why your service/product worked in their case.

In this part of the case study, you should summarize: 

• The strategy used to solve the problem of your customer 
• The process of implementing the solution 

F. Progress and Results

Tell your readers about what you and your client have achieved during your collaboration. Here you can include:

• Graphics about your progress
• Business objectives they have achieved
• Relevant metrics 

Step 6: Make It Visual

To elevate the information you have written for your audience, you must make sure it’s appealing and easy to read. And a great way to achieve that is to use visuals that add value to your case study.

Here are some design elements that will make emphasize your text:

• Graphic symbols that guide the eye (arrows, bullet points, checkmarks, etc.)
• Charts, graphics, tables 
• Relevant screenshots from business reports
• The colors and fonts of your brand
• Your client’s logo

Platforms like Canva can really come in handy while designing your case study. It’s easy to use and it has multiple free slide templates and graphics that save you time and money.

PRO TIP: Share Your Case Study Across All Marketing Channels

A case study is a perfect example of evergreen content that can be reshared endlessly on your social media channels .

Aside from helping you maintain a consistent posting schedule with ease, case study-related posts will increase your credibility and push leads toward the bottom of your marketing funnel . Other examples of social proof evergreen content are reviews, testimonials, and positive social media mentions.

To keep track of all your evergreen posts and have them scheduled on a continuous loop, use a social media tool like SocialBee.

Create evergreen content categories where all your posts get reposted regularly on your social media channels. 

Start your 14-day trial today and start using SocialBee for free!

Aside from promoting your case study on social media, you can also feature it in your newsletter that you can create using email newsletter software , include it as a pop-up on your website, and even create a separate landing page dedicated to your customer study.

Share Your Case Study on Social Media with SocialBee!

Get to writing your own case study.

What do you think? Is writing a case study easier than you thought? We sure hope so.

Learning how to write a case study is a simple process once you understand the logical steps that go into it. So make sure you go over the guide a couple of times before you start documenting your customer success stories.

And remember that the goal of your case study is to attract more leads . Therefore you need to include tangible results and valuable details that will compel your audience to invest in your products and services.

Article written by

Content writer at SocialBee

Related articles

Understanding How the X (Twitter) Algorithm Works in 2024

Have you noticed that some tweets always seem to appear at the top of your feed while others get buried?

How to Use LinkedIn Hashtags to Grow Your Follower Base

#SocialMedia is all about #Networking, with a pinch of #Innovation in a world ruled by #DigitalMarketing. You probably recognized the

Level up your social media game with exclusive resources delivered straight to your inbox

Proudly supporting

Exciting news!

WebPros acquires SocialBee

Use SocialBee’s Free AI Post Generator to create content for your social media profiles.

• Customizable tone of voice
• Several content variations to choose from
• 1000+ pre-made AI prompts

• How It Works
• Prices & Discounts

Bringing Stories to Your Essay: Introducing a Case Study the Right Way!

Table of contents

Share this article

Achieve Academic Success with Expert Assistance!

Crafted from Scratch for You.

Ensuring Your Work’s Originality.

Transform Your Draft into Excellence.

Perfecting Your Paper’s Grammar, Style, and Format (APA, MLA, etc.).

Calculate the cost of your paper

Get ideas for your essay

• Translators
• Graphic Designers

Please enter the email address you used for your account. Your sign in information will be sent to your email address after it has been verified.

Your Step-By-Step Guide To Writing a Case Study

Creating a case study is both an art and a science. It requires making an in-depth exploration of your chosen subject in order to extract meaningful insights and understand the dynamics that more general surveys or statistical research might not uncover. At the same time, your case study also needs to be a compelling read to ensure those insights get attention from other people!

Unsurprisingly, the prospect of crafting an effective case study can be daunting. It calls for strategic planning, careful organization, and clear communication, all of which can be challenging even for experienced researchers. That's why we've created this step-by-step guide, which breaks the process down into manageable steps, demystifying the journey from defining your research question to sharing your findings. Whether you're a seasoned researcher or a first-timer, this guide aims to equip you with the necessary tools and tips to create a case study that's not just informative, but also engaging and impactful.

Are you ready to unlock the potential of case studies? Let's dive in!

What is a case study?

First, it's important to understand what a case study is – and what it isn't.

A case study is a thorough exploration of a specific subject or event over a certain time frame. Case studies are utilized in numerous fields, including sociology, psychology, education, anthropology, business, and the health sciences, and employ various research techniques to shed light on complex issues.

A case study does not provide absolute proof or conclusions that can be universally applied. Because it concentrates on one particular case or just a few cases, the findings might not apply to different contexts or subjects. Case studies also aren't ideal for determining cause-and-effect relationships as they do not use controlled conditions to separate and measure the impacts of different factors. Lastly, it must be said that a case study isn't just a random assortment of facts or observations; it necessitates a clear research question, a methodical approach to data collection and analysis, and a thoughtful interpretation of the results.

Getting started

Now that we've established the definition and purpose of a case study, let's explore the process by which one is created. You can produce a case study by following these nine steps:

1. Define the purpose of your case study

Before you start writing a case study, you need to define its purpose clearly. Ask yourself: What is the research question or problem you aim to solve? What insights are you looking to uncover? Your goals will guide your research design and influence your choice of case. This initial stage of introspection and clarification is crucial as it acts as a roadmap for your study.

2. Select the case to study

Once you've defined your research objective, the next step is to choose a suitable case that can help answer your research question. This might be a unique, critical, or representative instance. Unique cases offer the opportunity to observe and analyze a situation that is unusual or not well-understood. In contrast, a representative or typical case is often chosen because it represents other cases or a broader phenomenon.

In any case, be sure to justify your choice. Explain why the case is of interest and how it can contribute to the knowledge or understanding of the issue at hand. For instance, if you're studying the effects of corporate restructuring on employee morale, you might choose to focus on a company that recently underwent a significant restructure.

3. Conduct a thorough literature review

Performing a literature review involves a careful examination of relevant scholarly articles, books, and other sources related to your research question or problem. In the process, you identify gaps in the current knowledge and determine how your case study can address them. By critically examining existing research, you will not only gain a comprehensive understanding of your chosen topic but also be able to refine your research question or hypothesis, if necessary.

4. Choose a methodological approach

The methodological approach used in your case study will depend on your research objectives and the nature of the case. Methodologies that can be employed in case studies include qualitative, quantitative, and mixed methods .

Qualitative methods are often used when the goal is to explore, understand, or interpret certain phenomena. These involve approaches like interviews, focus groups, or ethnography. Quantitative methods, on the other hand, are used when the goal is to test hypotheses or examine relationships between variables. Quantitative approaches often include experiments. Also, surveys may be either qualitative or quantitative depending on the question design.

You may choose to use a combination of qualitative and quantitative methods (mixed methods) if it suits your research objectives.

5. Collect and organize your data

Data collection should be systematic and organized to maintain the integrity and reliability of your research. You need to plan how you will record and store your data to ensure that it's accessible and usable.

If you're conducting interviews or observations, consider using recording devices (with participant consent) to capture the data accurately. In addition, you may want to transcribe the recorded material for easier analysis. If you're using documents or archival records, develop a system for coding and categorizing the data.

6. Analyze the data

Analysis involves interpreting your data to draw out meaningful insights; it is in this stage that your findings start to take shape. Depending on the nature of your data and your research question, you might use any of a variety of analysis methods. For qualitative data, you might employ thematic analysis to identify key themes or grounded theory to generate a new theoretical framework. For quantitative data, you might use statistical analysis to identify patterns or correlations.

Always be open to unexpected findings. Your initial hypotheses might not be supported, or you might uncover new insights that you hadn't initially considered. Remember that all data, whether they fit neatly into your analysis or not, provide valuable insights and contribute to the holistic understanding of your case.

7. Write the case study report

After analyzing the data, it's finally time to compose your case study. In terms of structure, a typical case study might consist of an introduction, background information, the collected data (results), analysis of that data, and the conclusion. Here's a brief breakdown of each section:

• Introduction: The introduction should be brief but engaging, providing a clear statement of the research question or problem, explaining why the case was chosen, and outlining what the case study will cover.
• Background: The background provides the context for your case. Describe the case, its history, and any relevant information that will help readers understand the situation.
• Results: This section should provide a comprehensive account of what you found, without interpretation or opinion. Present your findings in a clear, organized manner. Use visuals such as charts or graphs if they aid comprehension.
• Analysis: This section should provide your interpretations and arguments. Discuss the patterns, themes, or relationships you've identified in your data. Explain what these findings mean in relation to your research question.
• Conclusion: Finally, summarize the key insights from your case study along with their implications. Discuss the limitations of your study and propose avenues for future research.

8. Review and revise

The process of writing a case study doesn't actually end when the report is written; you also need to review your writing for coherence, clarity, and correctness. Don't underestimate the importance of this step! Make sure the information flows logically and that your arguments are well-supported. Check for any grammar or spelling errors. Having a peer or mentor review your work can be incredibly helpful as they provide a fresh perspective and can catch mistakes you might have missed.

9. Get approval if required

If your case study involves human subjects, you may need to obtain approval from an ethical review board. You'll also need to obtain informed consent from your subjects and ensure you respect their privacy and confidentiality throughout the research process. Always follow your institution's ethical guidelines and any other relevant legislation .

Practical tips for writing a compelling case study

Getting through all those steps can feel like a formidable challenge, but here are some practical tips to make the process more manageable:

Be systematic and organized

Given the importance of detail in case studies, it's vital to be systematic and organized from the get-go. This means keeping meticulous records of your data, your sources, and any changes to your research design. A good practice is to maintain a research journal or log where you can record your process, thoughts, and reflections.

In addition, use technology to your advantage. Digital tools like citation managers can help you keep track of your sources and make formatting references a breeze, while spreadsheet or database software can assist in managing and organizing your data. Developing a consistent system for labeling and storing information at the outset will save you time and effort later when you need to retrieve data for analysis.

Stay focused

One common pitfall in research and writing is loss of focus: getting sidetracked by interesting but ultimately irrelevant digressions, which can be very easy, especially when you're dealing with a rich and complex case. Always remember your research question and objectives, and let these guide your study at every step. It's perfectly acceptable – and in fact advisable – to delineate what your study will not cover. Setting clear boundaries can help you stay focused and manage the scope of your study effectively.

Use visual aids

Visual aids such as charts, diagrams, or photographs can greatly enhance your case study. They provide readers with a break from the monotony of text and can communicate complex data or relationships more easily. For instance, if you're presenting a lot of numerical data, consider using a chart or graph. If you're describing a process or sequence of events, portraying it in a flowchart or timeline might be useful. Remember, the goal is to aid comprehension, so make sure your visual aids are clear, well-labeled, and integrated into the text.

Include direct quotes

If your case study involves interviews, including direct quotes can add depth and a sense of the personal to your findings. They provide readers with a firsthand perspective and make your case study more engaging.

When using quotes, be sure to integrate them smoothly into your text. Provide enough context so readers understand the quote's relevance. Also, remember to adhere to ethical guidelines– always respect confidentiality and anonymity agreements.

Maintain ethical standards

Ethics is a fundamental consideration in all research, including case studies. Ensure you have proper consent from participants, respect their privacy, and accurately present your findings without manipulation.

Misrepresenting data or failing to respect participants' rights can lead to serious ethical violations. Always follow your institution's ethical guidelines and any other relevant legislation. If in doubt, seek advice from a supervisor or your institution's ethics committee.

Acknowledge limitations

Every research study has limitations, which could relate to the research design, data collection methods, or other aspects of the study. Being transparent about the limitations of your study can enhance its credibility; moreover, not only does identifying limitations demonstrate your critical thinking and honesty, but it also helps readers accurately interpret your findings.

Finally, acknowledging the limitations of your work helps to set the stage for further research. By identifying aspects that your study couldn't address, you provide other researchers with avenues for building on your findings.

Learn from examples

Before you start writing your case study, it can be helpful to review some published case studies in your field. Different fields may have different conventions, and familiarizing yourself with case studies in your own field can help guide your writing. Look at the structure, tone, and style. Pay attention to how the authors present and analyze data, and how they link their findings back to the research question. You can also learn a lot from the strengths and weaknesses of previously published works. However, remember to develop your own unique voice and perspective – don't just mimic what others have done.

Design for triangulation

Triangulation involves using multiple data sources or methods to gain a more comprehensive and balanced understanding of your research topic. By coming at your research question from multiple directions, such as by examining different datasets or using different methods, you can increase the validity of your results and gain more nuanced insights.

For example, if you're studying the impact of a new teaching method in a school, you might observe classes, interview teachers, and also survey students. Each method will provide a slightly different perspective, and together, they allow you to develop a more complete picture of the teaching method's impact.

Practice reflexivity

Reflexivity involves reflecting on how your assumptions, values, or experiences might influence your research process and interpretations. As a researcher, it's essential to be aware of your potential biases and how they might shape your study.

Consider keeping a reflexivity journal where you can note your thoughts, feelings, and reflections throughout the research process. This practice can help you stay aware of your biases and ensure your research is as objective and balanced as possible.

Write for your audience

Always make sure that your writing is on target for your intended audience. If you're writing for an academic audience, for example, you'll likely use a more formal tone and include more detailed methodological information. If you're writing for practitioners or a general audience, you might use a more accessible language and focus more on practical implications.

Remember to define any technical terms or jargon, and provide sufficient context so your readers can understand your research. The goal is to communicate your findings effectively, regardless of who your readers are.

Seek feedback

Feedback is valuable for improving your case study. Consider sharing drafts with your peers, mentors, or supervisors and asking for their input. Fresh eyes can provide different perspectives, catch errors, or suggest ways to strengthen your arguments.

Remember, feedback is not personal; it's about improving your work. Be open to critique and willing to revise your work based on the feedback you receive.

Writing a case study is a meticulous process that requires clear purpose, careful planning, systematic data collection, and thoughtful analysis. Although it can be time-consuming, the rich, detailed insights a well-executed case study can provide make this study design an invaluable tool in research.

By following this guide and adopting its practical tips, you will be well on your way to crafting a compelling case study that contributes meaningful insights to your chosen field. Good luck with your research journey!

Header image by Kateryna Hliznitsova .

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• What Is a Case Study? | Definition, Examples & Methods

What Is a Case Study? | Definition, Examples & Methods

Published on May 8, 2019 by Shona McCombes . Revised on November 20, 2023.

A case study is a detailed study of a specific subject, such as a person, group, place, event, organization, or phenomenon. Case studies are commonly used in social, educational, clinical, and business research.

A case study research design usually involves qualitative methods , but quantitative methods are sometimes also used. Case studies are good for describing , comparing, evaluating and understanding different aspects of a research problem .

Table of contents

When to do a case study, step 1: select a case, step 2: build a theoretical framework, step 3: collect your data, step 4: describe and analyze the case, other interesting articles.

A case study is an appropriate research design when you want to gain concrete, contextual, in-depth knowledge about a specific real-world subject. It allows you to explore the key characteristics, meanings, and implications of the case.

Case studies are often a good choice in a thesis or dissertation . They keep your project focused and manageable when you don’t have the time or resources to do large-scale research.

You might use just one complex case study where you explore a single subject in depth, or conduct multiple case studies to compare and illuminate different aspects of your research problem.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

Once you have developed your problem statement and research questions , you should be ready to choose the specific case that you want to focus on. A good case study should have the potential to:

• Provide new or unexpected insights into the subject
• Challenge or complicate existing assumptions and theories
• Propose practical courses of action to resolve a problem
• Open up new directions for future research

TipIf your research is more practical in nature and aims to simultaneously investigate an issue as you solve it, consider conducting action research instead.

Unlike quantitative or experimental research , a strong case study does not require a random or representative sample. In fact, case studies often deliberately focus on unusual, neglected, or outlying cases which may shed new light on the research problem.

Example of an outlying case studyIn the 1960s the town of Roseto, Pennsylvania was discovered to have extremely low rates of heart disease compared to the US average. It became an important case study for understanding previously neglected causes of heart disease.

However, you can also choose a more common or representative case to exemplify a particular category, experience or phenomenon.

Example of a representative case studyIn the 1920s, two sociologists used Muncie, Indiana as a case study of a typical American city that supposedly exemplified the changing culture of the US at the time.

While case studies focus more on concrete details than general theories, they should usually have some connection with theory in the field. This way the case study is not just an isolated description, but is integrated into existing knowledge about the topic. It might aim to:

• Exemplify a theory by showing how it explains the case under investigation
• Expand on a theory by uncovering new concepts and ideas that need to be incorporated
• Challenge a theory by exploring an outlier case that doesn’t fit with established assumptions

To ensure that your analysis of the case has a solid academic grounding, you should conduct a literature review of sources related to the topic and develop a theoretical framework . This means identifying key concepts and theories to guide your analysis and interpretation.

There are many different research methods you can use to collect data on your subject. Case studies tend to focus on qualitative data using methods such as interviews , observations , and analysis of primary and secondary sources (e.g., newspaper articles, photographs, official records). Sometimes a case study will also collect quantitative data.

Example of a mixed methods case studyFor a case study of a wind farm development in a rural area, you could collect quantitative data on employment rates and business revenue, collect qualitative data on local people’s perceptions and experiences, and analyze local and national media coverage of the development.

The aim is to gain as thorough an understanding as possible of the case and its context.

In writing up the case study, you need to bring together all the relevant aspects to give as complete a picture as possible of the subject.

How you report your findings depends on the type of research you are doing. Some case studies are structured like a standard scientific paper or thesis , with separate sections or chapters for the methods , results and discussion .

Others are written in a more narrative style, aiming to explore the case from various angles and analyze its meanings and implications (for example, by using textual analysis or discourse analysis ).

In all cases, though, make sure to give contextual details about the case, connect it back to the literature and theory, and discuss how it fits into wider patterns or debates.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Degrees of freedom
• Null hypothesis
• Discourse analysis
• Control groups
• Mixed methods research
• Non-probability sampling
• Quantitative research
• Ecological validity

Research bias

• Rosenthal effect
• Implicit bias
• Cognitive bias
• Selection bias
• Negativity bias
• Status quo bias

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, November 20). What Is a Case Study? | Definition, Examples & Methods. Scribbr. Retrieved August 26, 2024, from https://www.scribbr.com/methodology/case-study/

Is this article helpful?

Shona McCombes

Other students also liked, primary vs. secondary sources | difference & examples, what is a theoretical framework | guide to organizing, what is action research | definition & examples, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

How to Write a Case Study: A Breakdown of Requirements

It can take months to develop a case study. First, a topic must be chosen. Then the researcher must state his hypothesis, and make certain it lines up with the chosen topic. Then all the research must be completed. The case study can require both quantitative and qualitative research, as well as interviews with subjects. Once that is all done, it is time to write the case study.

Not all case studies are written the same. Depending on the size and topic of the study, it could be hundreds of pages long. Regardless of the size, the case study should have four main sections. These sections are:

1. Introduction

2. Background

3. Presentation of Findings

4. Conclusion

The Introduction

The introduction should set the stage for the case study, and state the thesis for the report. The intro must clearly articulate what the study's intention is, as well as how you plan on explaining and answering the thesis.

Again, remember that a case study is not a formal scientific research report that will only be read by scientists. The case study must be able to be read and understood by the layperson, and should read almost as a story, with a clear narrative.

As the reader reads the introduction, they should fully understand what the study is about, and why it is important. They should have a strong foundation for the background they will learn about in the next section.

The introduction should not be long. You must be able to introduce your topic in one or two paragraphs. Ideally, the introduction is one paragraph of about 3-5 sentences.

The Background

The background should detail what information brought the researcher to pose his hypothesis. It should clearly explain the subject or subjects, as well as their background information. And lastly, the background must give the reader a full understanding of the issue at hand, and what process will be taken with the study. Photos and videos are always helpful when applicable.

When writing the background, the researcher must explain the research methods used, and why. The type of research used will be dependent on the type of case study. The reader should have a clear idea why a particular type of research is good for the field and type of case study.

For example, a case study that is trying to determine what causes PTSD in veterans will heavily use interviews as a research method. Directly interviewing subjects garners invaluable research for the researcher. If possible, reference studies that prove this.

Again, as with the introduction, you do not want to write an extremely long background. It is important you provide the right amount of information, as you do not want to bore your readers with too much information, and you don't want them under-informed.

How much background information should a case study provide? What would happen if the case study had too much background info?

What would happen if the case study had too little background info?

The Presentation of Findings

While a case study might use scientific facts and information, a case study should not read as a scientific research journal or report. It should be easy to read and understand, and should follow the narrative determined in the first step.

The presentation of findings should clearly explain how the topic was researched, and summarize what the results are. Data should be summarized as simply as possible so that it is understandable by people without a scientific background. The researcher should describe what was learned from the interviews, and how the results answered the questions asked in the introduction.

When writing up the report, it is important to set the scene. The writer must clearly lay out all relevant facts and detail the most important points. While this section may be lengthy, you do not want to overwhelm the reader with too much information.

The Conclusion

The final section of the study is the conclusion. The purpose of the study isn't necessarily to solve the problem, only to offer possible solutions. The final summary should be an end to the story.

Remember, the case study is about asking and answering questions. The conclusion should answer the question posed by the researcher, but also leave the reader with questions of his own. The researcher wants the reader to think about the questions posed in the study, and be free to come to their own conclusions as well.

When reading the conclusion, the reader should be able to have the following takeaways:

Was there a solution provided? If so, why was it chosen?

Was the solution supported with solid evidence?

Did the personal experiences and interviews support the solution?

The conclusion should also make any recommendations that are necessary. What needs to be done, and you exactly should do it? In the case of the vets with PTSD, once a cause is determined, who is responsible for making sure the needs of the veterans are met?

English Writing Standards For Case Studies

When writing the case study, it is important to follow standard academic and scientific rules when it comes to spelling and grammar.

Spelling and Grammar

It should go without saying that a thorough spell check should be done. Remember, many case studies will require words or terms that are not in standard online dictionaries, so it is imperative the correct spelling is used. If possible, the first draft of the case study should be reviewed and edited by someone other than yourself.

Case studies are normally written in the past tense, as the report is detailing an event or topic that has since passed. The report should be written using a very logical and clear tone. All case studies are scientific in nature and should be written as such.

The First Draft

You do not sit down and write the case study in one day. It is a long and detailed process, and it must be done carefully and with precision. When you sit down to first start writing, you will want to write in plain English, and detail the what, when and how.

When writing the first draft, note any relevant assumptions. Don't immediately jump to any conclusions; just take notes of any initial thoughts. You are not looking for solutions yet. In the first draft use direct quotes when needed, and be sure to identify and qualify all information used.

If there are any issues you do not understand, the first draft is where it should be identified. Make a note so you return to review later. Using a spreadsheet program like Excel or Google Sheets is very valuable during this stage of the writing process, and can help keep you and your information and data organized.

The Second Draft

To prepare the second draft, you will want to assemble everything you have written thus far. You want to reduce the amount of writing so that the writing is tightly written and cogent. Remember, you want your case study to be interesting to read.

When possible, you should consider adding images, tables, maps, or diagrams to the text to make it more interesting for the reader. If you use any of these, make sure you have permission to use them. You cannot take an image from the Internet and use it without permission.

Once you have completed the second draft, you are not finished! It is imperative you have someone review your work. This could be a coworker, friend, or trusted colleague. You want someone who will give you an honest review of your work, and is willing to give you feedback, whether positive or negative.

Remember, you cannot proofread enough! You do not want to risk all of your hard work and research, and end up with a final case study that has spelling or grammatical errors. One typo could greatly hurt your project and damage your reputation in your field.

All case studies should follow LIT – Logical – Inclusive – Thorough.

The case study obviously must be logical. There can be no guessing or estimating. This means that the report must state what was observed, but cannot include any opinion or assumptions that might come from such an observation.

For example, if a veteran subject arrives at an interview holding an empty liquor bottle and is slurring his words, that observation must be made. However, the researcher cannot make the inference that the subject was intoxicated. The report can only include the facts.

With the Genie case, researchers witnessed Genie hitting herself and practicing self-harm. It could be assumed that she did this when she was angry. However, this wasn't always the case. She would also hit herself when she was afraid, bored or apprehensive. It is essential that researchers not guess or infer.

In order for a report to be inclusive, it must contain ALL data and findings. The researcher cannot pick and choose which data or findings to use in the report.

Using the example above, if a veteran subject arrives for an interview holding an empty liquor bottle and is slurring his words; any and all additional information that can be garnered should be recorded. For instance, what the subject was wearing, what was his demeanor, was he able to speak and communicate, etc.

When observing a man who might be drunk, it can be easy to make assumptions. However, the researcher cannot allow personal biases or beliefs to sway the findings. Any and all relevant facts must be included, regardless of size or perceived importance. Remember, small details might not seem relevant at the time of the interview. But once it is time to catalog the findings, small details might become important.

The last tip is to be thorough. It is important to delve into every observation. The researcher shouldn't just write down what they see and move on. It is essential to detail as much as possible.

For example, when interviewing veteran subjects, there interview responses are not the only information that should be garnered from the interview. The interviewer should use all senses when detailing their subject.

How does the subject appear? Is he clean? How is he dressed?

How does his voice sound? Is he speaking clearly and making cohesive thoughts? Does his voice sound raspy? Does he speak with a whisper, or does he speak too loudly?

Does the subject smell? Is he wearing cologne, or can you smell that he hasn't bathed or washed his clothes? What do his clothes look like? Is he well dressed, or does he wear casual clothes?

What is the background of the subject? What are his current living arrangements? Does he have supportive family and friends? Is he a loner who doesn't have a solid support system? Is the subject working? If so, is he happy with the job? If he is not employed, why is that? What makes the subject unemployable?

Case Studies in Marketing

We have already determined that case studies are very valuable in the business world. This is particularly true in the marketing field, which includes advertising and public relations. While case studies are almost all the same, marketing case studies are usually more dependent on interviews and observations.

Well-Known Marketing Case Studies

DeBeers is a diamond company headquartered in Luxembourg, and based in South Africa. It is well known for its logo, "A diamond is forever", which has been voted the best advertising slogan of the 20 th century.

Many studies have been done about DeBeers, but none are as well known as their marketing case study, and how they positioned themselves to be the most successful and well-known diamond company in the world.

DeBeers developed the idea for a diamond engagement ring. They also invented the "eternity band", which is a ring that has diamonds going all around it, signifying that long is forever.

They also invented the three-stone ring, signifying the past, present and future. De Beers was the first company to attribute their products, diamonds to the idea of love and romance. They originated the idea that an engagement ring should cost two-months salary.

The two-month salary standard is particularly unique, in that it is totally subjective. A ring should mean the same whether the man makes $25,000 a year or $250,000. And yet, the standard sticks due to DeBeers incredible marketing skills.

The De Beers case study is one of the most famous studies when it comes to both advertising and marketing, and is used worldwide as the ultimate example of a successful ongoing marketing campaign.

Planning the Market Research

The most important parts of the marketing case study are:

1. The case study's questions

2. The study's propositions

3. How information and data will be analyzed

4. The logic behind what is being proposed

5. How the findings will be interpreted

The study's questions should be either "how" or "why" questions, and their definitions are the researchers first job. These questions will help determine the study's goals.

Not every case study has a proposition. If you are doing an exploratory study, you will not have propositions. Instead, you will have a stated purpose, which will determine whether your study is successful, or not.

How the information will be analyzed will depend on what the topic is. This would vary depending on whether it was a person, group, or organization. Event and place studies are done differently.

When setting up your research, you will want to follow case study protocol. The protocol should have the following sections:

1. An overview of the case study, including the objectives, topic and issues.

2. Procedures for gathering information and conducting interviews.

3. Questions that will be asked during interviews and data collection.

4. A guide for the final case study report.

When deciding upon which research methods to use, these are the most important:

1. Documents and archival records

2 . Interviews

3. Direct observations (and indirect when possible)

4. Indirect observations, or observations of subjects

5. Physical artifacts and tools

Documents could include almost anything, including letters, memos, newspaper articles, Internet articles, other case studies, or any other document germane to the study.

Developing the Case Study

Developing a marketing case study follows the same steps and procedures as most case studies. It begins with asking a question, "what is missing?"

1. What is the background of the case study? Who requested the study to be done and why? What industry is the study in, and where will the study take place? What marketing needs are you trying to address?

2. What is the problem that needs a solution? What is the situation, and what are the risks? What are you trying to prove?

3. What questions are required to analyze the problem? What questions might the reader of the study have?

4. What tools are required to analyze the problem? Is data analysis necessary? Can the study use just interviews and observations, or will it require additional information?

5. What is your current knowledge about the problem or situation? How much background information do you need to procure? How will you obtain this background info?

6. What other information do you need to know to successfully complete the study?

7. How do you plan to present the report? Will it be a simple written report, or will you add PowerPoint presentations or images or videos? When is the report due? Are you giving yourself enough time to complete the project?

Formulating the Marketing Case Study

1. What is the marketing problem? Most case studies begin with a problem that management or the marketing department is facing. You must fully understand the problem and what caused it. That is when you can start searching for a solution.

However, marketing case studies can be difficult to research. You must turn a marketing problem into a research problem. For example, if the problem is that sales are not growing, you must translate that to a research problem.

What could potential research problems be?

Research problems could be poor performance or poor expectations. You want a research problem because then you can find an answer. Management problems focus on actions, such as whether to advertise more, or change advertising strategies. Research problems focus on finding out how to solve the management problem.

Method of Inquiry

As with the research for most case studies, the scientific method is standard. It allows you to use existing knowledge as a starting point. The scientific method has the following steps:

1. Ask a question – formulate a problem

2. Do background research

3. Formulate a problem

4. Develop/construct a hypothesis

5. Make predictions based on the hypothesis

6. Do experiments to test the hypothesis

7 . Conduct the test/experiment

8 . Analyze and communicate the results

The above terminology is very similar to the research process. The main difference is that the scientific method is objective and the research process is subjective. Quantitative research is based on impartial analysis, and qualitative research is based on personal judgment.

Research Method

After selecting the method of inquiry, it is time to decide on a research method. There are two main research methodologies, experimental research and non-experimental research.

Experimental research allows you to control the variables and to manipulate any of the variables that influence the study.

Non-experimental research allows you to observe, but not intervene. You just observe and then report your findings.

Research Design

The design is the plan for how you will conduct the study, and how you will collect the data. The design is the scientific method you will use to obtain the information you are seeking.

Data Collection

There are many different ways to collect data, with the two most important being interviews and observation.

Interviews are when you ask people questions and get a response. These interviews can be done face-to-face, by telephone, the mail, email, or even the Internet. This category of research techniques is survey research. Interviews can be done in both experimental and non-experimental research.

Observation is watching a person or company's behavior. For example, by observing a persons buying behavior, you could predict how that person will make purchases in the future.

When using interviews or observation, it is required that you record your results. How you record the data will depend on which method you use. As with all case studies, using a research notebook is key, and will be the heart of the study.

Sample Design

When developing your case study, you won't usually examine an entire population; those are done by larger research projects. Your study will use a sample, which is a small representation of the population. When designing your sample, be prepared to answer the following questions:

1. From which type of population should the sample be chosen?

2. What is the process for the selection of the sample?

3. What will be the size of the sample?

There are two ways to select a sample from the general population; probability and non-probability sampling. Probability sampling uses random sampling of everyone in the population. Non-probability sampling uses the judgment of the researcher.

The last step of designing your sample is to determine the sample size. This can depend on cost and accuracy. Larger samples are better and more accurate, but they can also be costly.

Analysis of the Data

In order to use the data, it first must be analyzed. How you analyze the data should be decided upon as early in the process as possible, and will vary depending on the type of info you are collecting, and the form of measurement being used. As stated repeatedly, make sure you keep track of everything in the research notebook.

The Marketing Case Study Report

The final stage of the process is the marketing case study. The final study will include all of the information, as well as detail the process. It will also describe the results, conclusions, and any recommendations. It must have all the information needed so that the reader can understand the case study.

As with all case studies, it must be easy to read. You don't want to use info that is too technical; otherwise you could potentially overwhelm your reader. So make sure it is written in plain English, with scientific and technical terms kept to a minimum.

Using Your Case Study

Once you have your finished case study, you have many opportunities to get that case study in front of potential customers. Here is a list of the ways you can use your case study to help your company's marketing efforts.

1. Have a page on your website that is dedicated to case studies. The page should have a catchy name and list all of the company's case studies, beginning with the most recent. Next to each case study list its goals and results.

2. Put the case study on your home page. This will put your study front and center, and will be immediately visible when customers visit your web page. Make sure the link isn't hidden in an area rarely visited by guests. You can highlight the case study for a few weeks or months, or until you feel your study has received enough looks.

3. Write a blog post about your case study. Obviously you must have a blog for this to be successful. This is a great way to give your case study exposure, and it allows you to write the post directly addressing your audience's needs.

4 . Make a video from your case study. Videos are more popular than ever, and turning a lengthy case study into a brief video is a great way to get your case study in front of people who might not normally read a case study.

5. Use your case study on a landing page. You can pull quotes from the case study and use those on product pages. Again, this format works best when you use market segmentation.

6. Post about your case studies on social media. You can share links on Twitter, Facebook and LinkedIn. Write a little interesting tidbit, enough to capture your client's interest, and then place the link.

7 . Use your case study in your email marketing. This is most effective if your email list is segmented, and you can direct your case study to those most likely to be receptive to it.

8. Use your case studies in your newsletters. This can be especially effective if you use segmentation with your newsletters, so you can gear the case study to those most likely to read and value it.

• Course Catalog
• Group Discounts
• Gift Certificates
• For Libraries
• CEU Verification
• Medical Terminology
• Accounting Course
• Writing Basics
• QuickBooks Training
• Proofreading Class
• Sensitivity Training
• Excel Certificate
• Teach Online
• Terms of Service
• Privacy Policy

• EXPLORE Random Article
• Happiness Hub

How to Write a Case Study

Last Updated: April 1, 2024 Approved

This article was co-authored by Annaliese Dunne . Annaliese Dunne is a Middle School English Teacher. With over 10 years of teaching experience, her areas of expertise include writing and grammar instruction, as well as teaching reading comprehension. She is also an experienced freelance writer. She received her Bachelor's degree in English. wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 82% of readers who voted found the article helpful, earning it our reader-approved status. This article has been viewed 581,126 times.

There are many different kinds of case studies. There are also various uses for writing case studies, from academic research purposes to provision of corporate proof points. There are approximately four types of case studies: illustrative (descriptive of events), exploratory (investigative), cumulative (collective information comparisons) and critical (examine particular subject with cause and effect outcomes). After becoming familiar with the different types and styles of case study instructions and how each applies to your purposes, there are some steps that make writing flow smoothly and ensure the development and delivery of a uniform case study that can be used to prove a point or illustrate accomplishments.

Getting Started

• Whatever case study method you're employing, your purpose is to thoroughly analyze a situation (or "case") which could reveal factors or information otherwise ignored or unknown. These can be written about companies, whole countries, or even individuals. What's more, these can be written on more abstract things, like programs or practices. Really, if you can dream it, you can write a case study about it. [1] X Research source

• Start your research at the library and/or on the Internet to begin delving into a specific problem. Once you've narrowed down your search to a specific problem, find as much about it as you can from a variety of different sources. Look up information in books, journals, DVDs, websites, magazines, newspapers, etc. As you go through each one, take adequate notes so you can find the info later on! [1] X Research source

• Find out what has been written before, and read the important articles about your case's situation . When you do this, you may find there is an existing problem that needs solution, or you may find that you have to come up with an interesting idea that might or might not work in your case situation.
• Review sample case studies that are similar in style and scope to get an idea of composition and format, too.

Preparing the Interview

• Find knowledgeable people to interview. They don't necessarily have to be on your site, but they must be, actively or in the past, directly involved.
• Determine whether you will interview an individual or group of individuals to serve as examples in your case study. It may be beneficial for participants to gather as a group and provide insight collectively. If the study focuses on personal subject matter or medical issues, it may be better to conduct personal interviews.
• Gather as much information as possible about your subjects to ensure that you develop interviews and activities that will result in obtaining the most advantageous information to your study.

• When you are interviewing people, ask them questions that will help you understand their opinions. I.e., How do you feel about the situation? What can you tell me about how the site (or the situation) developed? What do you think should be different, if anything? You also need to ask questions that will give you facts that might not be available from an article--make your work different and purposeful.

• Make sure all your informants are aware of what you're doing. They need to be fully informed (and signing waivers in certain cases) and your questions need to be appropriate and not controversial.

Obtaining Data

• When you ask a question that doesn't let someone answer with a "yes" or a "no" you usually get more information. What you are trying to do is get the person to tell you whatever it is that he or she knows and thinks --even though you don't always know just what that is going to be before you ask the question. Keep your questions open-ended.
• Request data and materials from subjects as applicable to add credibility to your findings and future presentations of your case study. Clients can provide statistics about usage of a new tool or product and participants can provide photos and quotes that show evidence of findings that may support the case.

• You can't include it all. So, you need to think about how to sort through it, take out the excess, and arrange it so that the situation at the case site will be understandable to your readers. Before you can do this, you have to put all the information together where you can see it and analyze what is going on.

• This will allow you to concentrate on what material is the most important. You're bound to receive information from participants that should be included, but solely on the periphery. Organize your material to mirror this.

Writing Your Piece

• The introduction should very clearly set the stage. In a detective story, the crime happens right at the beginning and the detective has to put together the information to solve it for the rest of the story. In a case, you can start by raising a question. You could quote someone you interviewed.
• Make sure to include background information on your study site, why your interviewees are a good sample, and what makes your problem pressing to give your audience a panoramic view of the issue. [2] X Research source After you've clearly stated the problem at hand, of course. [1] X Research source Include photos or a video if it would benefit your work to be persuasive and personalized.
• After the reader has all the knowledge needed to understand the problem, present your data. Include customer quotes and data (percentages, awards and findings) if possible to add a personal touch and more credibility to the case presented. Describe for the reader what you learned in your interviews about the problem at this site, how it developed, what solutions have already been proposed and/or tried, and feelings and thoughts of those working or visiting there. You may have to do calculations or extra research yourself to back up any claims.
• At the end of your analysis, you should offer possible solutions, but don't worry about solving the case itself. You may find referring to some interviewees' statements will do the alluding for you. Let the reader leave with a full grasp of the problem, but trying to come up with their own desire to change it. [1] X Research source Feel free to leave the reader with a question, forcing them to think for themselves. If you have written a good case, they will have enough information to understand the situation and have a lively class discussion.

• You may have terms that would be hard for other cultures to understand. If this is the case, include it in the appendix or in a Note for the Instructor .

• Go over your study section by section, but also as a whole. Each data point needs to fit into both it's place and the entirety of the work. If you can't find an appropriate place for something, stick it in the appendix.

• Have someone else proofread, too. Your mind may have become oblivious to the errors it has seen 100 times. Another set of eyes may also notice content that has been left open-ended or is otherwise confusing.

Expert Q&A

• If you are developing many case studies for the same purpose using the same general subjects, use a uniform template and/or design. Thanks Helpful 0 Not Helpful 0
• Be sure to ask open-ended questions while conducting interviews to foster a discussion. Thanks Helpful 0 Not Helpful 0
• Ask for permission to contact case study participants as you develop the written case study. You may discover that you need additional information as you analyze all data. Thanks Helpful 0 Not Helpful 0

You Might Also Like

Expert Interview

Thanks for reading our article! If you’d like to learn more about writing, check out our in-depth interview with Annaliese Dunne .

• ↑ 1.0 1.1 1.2 1.3 http://www.essayforum.com/grammar-usage-13/to-write-case-study-366/
• ↑ https://www.universalclass.com/articles/business/the-process-of-writing-a-case-study.htm
• http://writing.colostate.edu/guides/research/casestudy/pop2a.cfm Colorado State University Case Study writing guides
• http://www.hoffmanmarcom.com/casestudy/howtowrite.php Hoffman Marketing and Communications case study overview

About this article

To write a case study, start with an introduction that defines key terms, outlines the problem your case study addresses, and gives necessary background information. You can also include photos or a video if they will help your work to be more persuasive. Then, present your findings from the case study and explain your methodology, including how you used your data to come to your conclusions. In your conclusion, offer possible solutions or next steps for research, based on your results. To learn how to select participants for your case study, keep reading. Did this summary help you? Yes No

Reader Success Stories

Aaron Farrell

Jul 11, 2019

Did this article help you?

Sep 11, 2016

Sep 21, 2017

Dec 18, 2017

Mar 6, 2017

• About wikiHow
• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

• Thesis Action Plan New
• Academic Project Planner

Literature Navigator

Thesis dialogue blueprint, writing wizard's template, research proposal compass.

• Why students love us
• Rebels Blog
• Why we are different
• All Products
• Coming Soon

How to Start a Research Project: A Step-by-Step Guide for Beginners

Starting a research project can be a bit overwhelming, especially if it's your first time. But don't worry! This guide will walk you through each step, making the process easier and more manageable. By breaking down the project into smaller tasks, you'll find it much simpler to handle. Let's dive into how you can go from an idea to a well-organized research proposal.

Key Takeaways

• Clearly define your research subject to set a strong foundation.
• Engage stakeholders early to align expectations and gather input.
• Craft a precise research statement to guide your study.
• Establish specific research goals to stay focused.
• Choose a suitable methodology to ensure reliable results.

Defining the Research Subject

Selecting a topic of interest.

The first step in starting your research project is to choose a topic that genuinely interests you. Selecting a topic that excites you will keep you motivated throughout the research process. Begin by brainstorming broad areas of interest and then narrow them down to a specific niche. Consider the practicalities, such as the availability of resources and the scope of your project. If you're struggling to find a topic, consult with your instructor or peers for guidance.

Narrowing Down the Focus

Once you have a general topic, it's essential to narrow it down to a more specific focus. This involves conducting an initial literature review to identify gaps, debates, and questions within your chosen field. By doing so, you can pinpoint a unique angle for your research. Remember, a well-defined focus will make your research more manageable and impactful.

Aligning with Assignment Instructions

It's crucial to ensure that your chosen topic aligns with the assignment instructions provided by your instructor. Review the guidelines carefully to understand the requirements and limitations. This alignment will not only help you meet academic expectations but also make your research more relevant and structured. If in doubt, seek clarification from your instructor to avoid any misunderstandings.

Engaging with Stakeholders

Identifying key stakeholders.

Before starting your research, it's crucial to identify the key stakeholders involved. These are the people who have a vested interest in your project. They can include supervisors, funding bodies, and even the target audience of your research. Understanding who your stakeholders are will help you align your research goals with their expectations.

Conducting Initial Meetings

Once you've identified your stakeholders, the next step is to conduct initial meetings . These meetings are essential for gathering input and setting expectations. During these meetings, discuss the scope of your research, the methodologies you plan to use, and any potential challenges. This is also a good time to ask for any resources or support you might need.

Gathering Input and Expectations

After the initial meetings, gather all the input and expectations from your stakeholders. This will help you refine your research plan and ensure that it meets everyone's needs. Create a summary document that outlines the key points discussed and any agreed-upon actions. This document will serve as a reference throughout your research project.

Crafting a Precise Research Statement

Formulating the main question.

Creating a strong research statement starts with formulating the main question . This question will guide your entire project. Make sure it is clear and specific. For example, if you're studying the impact of WhatsApp on communication, your main question could be, "How does WhatsApp influence daily communication habits?"

Ensuring Clarity and Conciseness

Your research statement should be both clear and concise. Avoid using complex words or jargon. Instead, focus on making your statement easy to understand. A clear and concise statement helps keep your research focused and on track.

Aligning with Research Goals

Finally, ensure that your research statement aligns with your overall research goals. This means that your statement should directly relate to what you aim to achieve with your study. For instance, if your goal is to understand user behavior on WhatsApp, your research statement should reflect this aim.

Establishing Research Goals

Setting clear research goals is a crucial step in any research project. These goals guide your study and help you stay focused on what you aim to achieve. Here’s how to establish effective research goals:

Identifying Key Areas of Exploration

Start by pinpointing the main areas you want to explore. These should be directly related to your research statement. Identifying these key areas will help you stay organized and ensure that your research is comprehensive.

Setting Specific Objectives

Once you have identified the key areas, the next step is to set specific objectives. These objectives should be clear, measurable, and achievable. Pinpointing the major focus of your research will help you stay on track and make your study more manageable.

Aligning Goals with Stakeholder Expectations

It's important to ensure that your research goals align with the expectations of your stakeholders. This alignment will help you gather the necessary support and resources for your project. Conducting initial meetings with stakeholders can provide valuable input and help you refine your goals.

Conducting a Comprehensive Literature Review

Gathering relevant sources.

Before diving into your research, it's crucial to gather all the relevant sources. Start by doing a preliminary search to see if there's enough information available. Use libraries, online databases, and academic journals to find books, articles, and papers related to your topic. This step ensures you have a solid foundation for your research .

Analyzing Existing Research

Once you have your sources, the next step is to analyze them. Skim through the materials to identify key points and different viewpoints. This will help you understand the current state of research in your field. Pay attention to how these sources relate to your research question.

Identifying Research Gaps

Finally, look for gaps in the existing research. These are areas that haven't been explored or questions that haven't been answered. Identifying these gaps can provide a direction for your own research and make your study more valuable. Conducting a comprehensive literature review is vital for putting your research in context and highlighting what your research will add to the field.

Choosing an Appropriate Methodology

Deciding Between Qualitative and Quantitative Methods

When starting your research, you need to decide whether to use qualitative or quantitative methods . Qualitative methods involve first-hand observations like interviews, focus groups, and case studies. These methods are great for exploring complex issues in depth. On the other hand, quantitative methods deal with numbers and logic, focusing on statistics and numerical patterns. They are ideal for testing hypotheses and making generalizable conclusions. Sometimes, a mixed-method approach, combining both qualitative and quantitative methods, can be the best choice.

Selecting Data Collection Tools

Choosing the right tools for data collection is crucial. For qualitative research, you might use interviews, focus groups, or open-ended surveys. For quantitative research, tools like structured surveys, experiments, and statistical software are more appropriate. Make sure your tools align with your research questions and objectives.

Planning Data Analysis Techniques

Once you have collected your data, the next step is to analyze it. For qualitative data, look for patterns and themes. Coding and thematic analysis are common techniques. For quantitative data, use statistical methods to test your hypotheses. Software like SPSS or R can help you manage and analyze large datasets. Proper planning of your data analysis techniques ensures that your findings are reliable and valid.

Creating a Detailed Research Plan

Creating a detailed research plan is essential for the success of your project. It helps you stay organized and ensures that you cover all necessary aspects of your research. Here are the key steps to follow:

Outlining the Methodology

Start by outlining the methodology you will use. This includes deciding on qualitative or quantitative methods, selecting tools for data collection, and determining how you will analyze the data. A clear methodology is essential for the credibility of your research.

Creating a Research Timeline

Next, create a timeline for your research activities. Break down your tasks into manageable steps and assign deadlines to each. This will help you stay on track and ensure that you complete your project on time. Use a table to organize your timeline:

Allocating Resources Effectively

Finally, allocate your resources effectively. This includes budgeting for any costs, such as software, travel, or materials, and ensuring you have access to necessary resources like libraries or labs. Proper resource allocation can make a significant difference in the quality and feasibility of your research.

Writing the Research Proposal

Structuring the proposal.

When structuring your research proposal, it's essential to include several key components. Start with a clear title that reflects the main focus of your study. Follow this with an abstract that provides a brief summary of your research objectives, methods, and expected outcomes. The introduction should set the context for your research, explaining the background and significance of your study. Make sure to include a literature review that highlights existing research and identifies gaps your study aims to fill. Finally, outline your research design, detailing the methods and procedures you will use to collect and analyze data.

Including a Literature Review

A comprehensive literature review is crucial for situating your research within the existing body of knowledge. Begin by gathering relevant sources from academic journals, books, and other credible publications. Summarize and synthesize these sources to show how they relate to your research question. Highlight any gaps or inconsistencies in the current literature that your study will address. This section not only demonstrates your understanding of the field but also justifies the need for your research.

Describing the Research Design

The research design section should provide a detailed plan of how you will conduct your study. Start by explaining whether you will use qualitative, quantitative, or mixed methods. Describe the data collection tools you will use, such as surveys, interviews, or experiments. Outline your sampling methods and criteria for selecting participants or data sources. Finally, detail your data analysis techniques, explaining how you will interpret the results to answer your research question. This section should be thorough enough to convince reviewers that your methodology is sound and feasible.

Implementing the Research Project

Collecting data.

Once your research plan is in place, the next step is to start collecting data. This involves gathering the information you need to answer your research questions . Make sure to use the data collection tools you selected during your planning phase. Accurate data collection is crucial for the success of your project.

Analyzing Results

After collecting your data, the next step is to analyze it. This means looking for patterns, trends, and insights that will help you answer your research questions. Use the data analysis techniques you planned earlier. Remember, the goal is to make sense of the data and draw meaningful conclusions.

Adjusting the Plan as Needed

As you collect and analyze data, you might find that some parts of your plan need to be adjusted. This is normal and part of the research process. Be flexible and ready to make changes to your methodology or data collection methods if necessary. Staying adaptable will help you overcome any challenges that arise.

Presenting Your Findings

Organizing the presentation.

When presenting your research findings, it's crucial to structure your presentation logically. Start with an introduction that outlines the purpose of your research and the main questions you aimed to answer. Follow this with a summary of your methodology, highlighting the key methods used for data collection and analysis. Ensure your findings are presented clearly and concisely , using tables and graphs where appropriate to illustrate your points.

Engaging the Audience

To keep your audience engaged, use a mix of visual aids and verbal explanations. Interactive elements like Q&A sessions or live demonstrations can also be effective. Make sure to explain the significance of your findings and how they contribute to the existing body of knowledge. This not only keeps the audience interested but also underscores the importance of your work.

Handling Questions and Feedback

Be prepared to handle questions and feedback from your audience. This is an opportunity to clarify any doubts and to demonstrate your deep understanding of the subject. Listen carefully to the questions, and take your time to provide thoughtful and well-reasoned answers. This will not only help in addressing any concerns but also in reinforcing the credibility of your research.

Sharing your research results is a crucial step in your academic journey. It can be tough, but you don't have to do it alone. Our Thesis Action Plan is here to guide you through every step. Ready to make your thesis writing stress-free? Visit our website now and claim your special offer!

In summary, starting a research project can seem overwhelming, but breaking it down into clear, manageable steps can make the process much more approachable. By carefully defining your research topic, engaging with stakeholders, crafting a precise research statement, and establishing clear goals and methodologies, you set a strong foundation for your project. Remember, a well-organized plan not only helps you manage your time and resources effectively but also enhances the credibility and impact of your research. As you embark on your research journey, keep these steps in mind to navigate the process smoothly and achieve your academic goals.

Frequently Asked Questions

What is a research project.

A research project is a detailed study on a specific topic. It involves gathering information, analyzing data, and presenting findings to answer a particular question or solve a problem.

How do I choose a good research topic?

Pick a topic that interests you and has plenty of resources available. Make sure it aligns with your assignment guidelines and is neither too broad nor too narrow.

Why is it important to define the research subject?

Defining the research subject helps you stay focused and organized. It ensures that you have a clear direction and don't get lost in too many ideas.

Who are stakeholders in a research project?

Stakeholders are people who have an interest in your research. They can include funders, academic supervisors, or anyone affected by your study.

What is a research statement?

A research statement is a clear and concise description of the main question or problem your research aims to address.

What are research goals?

Research goals are the specific objectives you aim to achieve with your study. They guide your research and help you stay focused on your main question.

How do I choose the right methodology for my research?

Choosing the right methodology involves deciding how you will collect and analyze data. Consider whether you need qualitative or quantitative data and choose tools and techniques that best suit your study.

What should be included in a research proposal?

A research proposal should include the research subject, a literature review, research questions, methodology, and a timeline. It outlines what you plan to study and how you will do it.

Discovering Statistics Using IBM SPSS Statistics: A Fun and Informative Guide

Unlocking the Power of Data: A Review of 'Essentials of Modern Business Statistics with Microsoft Excel'

Discovering Statistics Using SAS: A Comprehensive Review

Thesis Revision Made Simple: Techniques for Perfecting Your Academic Work

Integrating Calm into Your Study Routine: The Power of Mindfulness in Education

How to Determine the Perfect Research Proposal Length

Thesis Action Plan

How Do I Start Writing My Thesis: A Step-by-Step Guide

From idea to proposal: 6 steps to efficiently plan your research project in 2024.

• Blog Articles
• Affiliate Program
• Terms and Conditions
• Payment and Shipping Terms
• Privacy Policy
• Return Policy

© 2024 Research Rebels, All rights reserved.

Your cart is currently empty.

• Writing well

How to write a case study response

• Starting well
• How to write an annotated bibliography
• How to write a critique
• How to write an empirical article
• How to write an essay
• How to write a literature review
• How to write a reflective task
• How to write a report
• Finishing well

Before you start writing, you need to carefully read the case study and make a note of the main issues and problems involved as well as the main stakeholders (persons or groups of persons who have an interest in the case).

Case study elements

A case study response would include the following elements:

Introduction

Introduce the main purpose of the case study and briefly outline the overall problem to be solved.

Description

Write a brief description of the case under discussion giving an outline of the main issues involved. Always assume that your reader knows nothing of the assignment task and provide enough information to give a context for your discussion of the issues.

Discuss the issues raised one by one, using information gained from your research of the academic literature.

Your discussion may include:

• an outline of the issue and its implications for or relationship to different stakeholders
• how that issue links to theories or research in the academic literature
• suggested solutions or ideas
• evaluation of the solutions or ideas for this particular case.

Conclusion / Recommendations

Finally, sum up the conclusions that you have come to and give recommendations to resolve the case. Give reasons for your recommendations.

• Carefully read the case and noted the main issues and stakeholders in the case?
• Written a brief description of the case to give your readers a context for the main issues?
• Discussed each issue with reference to the academic literature?
• Evaluated the solutions or ideas for each issue to find the ones most suitable?
• Made final recommendations of how to resolve the case?
• Used a well structured introduction, body and conclusion?
• Cited and referenced all of the work by other people?
• Used correct grammar, spelling and punctuation, clear presentation and appropriate reference style?

Further information

• Monash University: Writing a case study
• University of New South Wales: Writing a Case Study Report in Engineering

Global links and information

• Referencing and using sources
• Background and development
• Changes to QUT cite|write
• Need more help?
• Current students
• Current staff
• TEQSA Provider ID: PRV12079 (Australian University)
• CRICOS No. 00213J
• ABN 83 791 724 622
• Last modified: 28-May-2024
• Accessibility
• Right to Information
• Feedback and suggestions

Acknowledgement of Traditional Owners

QUT acknowledges the Traditional Owners of the lands where QUT now stands.