the purpose of control group in an experiment is

• History & Society
• Science & Tech
• Biographies
• Animals & Nature
• Geography & Travel
• Arts & Culture
• Games & Quizzes
• On This Day
• One Good Fact
• New Articles
• Lifestyles & Social Issues
• Philosophy & Religion
• Politics, Law & Government
• World History
• Health & Medicine
• Browse Biographies
• Birds, Reptiles & Other Vertebrates
• Bugs, Mollusks & Other Invertebrates
• Environment
• Fossils & Geologic Time
• Entertainment & Pop Culture
• Sports & Recreation
• Visual Arts
• Demystified
• Image Galleries
• Infographics
• Top Questions
• Britannica Kids
• Saving Earth
• Space Next 50
• Student Center
• When did science begin?
• Where was science invented?

control group

Our editors will review what you’ve submitted and determine whether to revise the article.

• Verywell Mind - What Is a Control Group?
• National Center for Biotechnology Information - PubMed Central - Control Group Design: Enhancing Rigor in Research of Mind-Body Therapies for Depression

control group , the standard to which comparisons are made in an experiment. Many experiments are designed to include a control group and one or more experimental groups; in fact, some scholars reserve the term experiment for study designs that include a control group. Ideally, the control group and the experimental groups are identical in every way except that the experimental groups are subjected to treatments or interventions believed to have an effect on the outcome of interest while the control group is not. Inclusion of a control group greatly strengthens researchers’ ability to draw conclusions from a study. Indeed, only in the presence of a control group can a researcher determine whether a treatment under investigation truly has a significant effect on an experimental group, and the possibility of making an erroneous conclusion is reduced. See also scientific method .

A typical use of a control group is in an experiment in which the effect of a treatment is unknown and comparisons between the control group and the experimental group are used to measure the effect of the treatment. For instance, in a pharmaceutical study to determine the effectiveness of a new drug on the treatment of migraines , the experimental group will be administered the new drug and the control group will be administered a placebo (a drug that is inert, or assumed to have no effect). Each group is then given the same questionnaire and asked to rate the effectiveness of the drug in relieving symptoms . If the new drug is effective, the experimental group is expected to have a significantly better response to it than the control group. Another possible design is to include several experimental groups, each of which is given a different dosage of the new drug, plus one control group. In this design, the analyst will compare results from each of the experimental groups to the control group. This type of experiment allows the researcher to determine not only if the drug is effective but also the effectiveness of different dosages. In the absence of a control group, the researcher’s ability to draw conclusions about the new drug is greatly weakened, due to the placebo effect and other threats to validity. Comparisons between the experimental groups with different dosages can be made without including a control group, but there is no way to know if any of the dosages of the new drug are more or less effective than the placebo.

It is important that every aspect of the experimental environment be as alike as possible for all subjects in the experiment. If conditions are different for the experimental and control groups, it is impossible to know whether differences between groups are actually due to the difference in treatments or to the difference in environment. For example, in the new migraine drug study, it would be a poor study design to administer the questionnaire to the experimental group in a hospital setting while asking the control group to complete it at home. Such a study could lead to a misleading conclusion, because differences in responses between the experimental and control groups could have been due to the effect of the drug or could have been due to the conditions under which the data were collected. For instance, perhaps the experimental group received better instructions or was more motivated by being in the hospital setting to give accurate responses than the control group.

In non-laboratory and nonclinical experiments, such as field experiments in ecology or economics , even well-designed experiments are subject to numerous and complex variables that cannot always be managed across the control group and experimental groups. Randomization, in which individuals or groups of individuals are randomly assigned to the treatment and control groups, is an important tool to eliminate selection bias and can aid in disentangling the effects of the experimental treatment from other confounding factors. Appropriate sample sizes are also important.

A control group study can be managed in two different ways. In a single-blind study, the researcher will know whether a particular subject is in the control group, but the subject will not know. In a double-blind study , neither the subject nor the researcher will know which treatment the subject is receiving. In many cases, a double-blind study is preferable to a single-blind study, since the researcher cannot inadvertently affect the results or their interpretation by treating a control subject differently from an experimental subject.

• Science Notes Posts
• Contact Science Notes
• Todd Helmenstine Biography
• Anne Helmenstine Biography
• Free Printable Periodic Tables (PDF and PNG)
• Periodic Table Wallpapers
• Interactive Periodic Table
• Periodic Table Posters
• Science Experiments for Kids
• How to Grow Crystals
• Chemistry Projects
• Fire and Flames Projects
• Holiday Science
• Chemistry Problems With Answers
• Physics Problems
• Unit Conversion Example Problems
• Chemistry Worksheets
• Biology Worksheets
• Periodic Table Worksheets
• Physical Science Worksheets
• Science Lab Worksheets
• My Amazon Books

Control Group Definition and Examples

The control group is the set of subjects that does not receive the treatment in a study. In other words, it is the group where the independent variable is held constant. This is important because the control group is a baseline for measuring the effects of a treatment in an experiment or study. A controlled experiment is one which includes one or more control groups.

• The experimental group experiences a treatment or change in the independent variable. In contrast, the independent variable is constant in the control group.
• A control group is important because it allows meaningful comparison. The researcher compares the experimental group to it to assess whether or not there is a relationship between the independent and dependent variable and the magnitude of the effect.
• There are different types of control groups. A controlled experiment has one more control group.

Control Group vs Experimental Group

The only difference between the control group and experimental group is that subjects in the experimental group receive the treatment being studied, while participants in the control group do not. Otherwise, all other variables between the two groups are the same.

Control Group vs Control Variable

A control group is not the same thing as a control variable. A control variable or controlled variable is any factor that is held constant during an experiment. Examples of common control variables include temperature, duration, and sample size. The control variables are the same for both the control and experimental groups.

Types of Control Groups

There are different types of control groups:

• Placebo group : A placebo group receives a placebo , which is a fake treatment that resembles the treatment in every respect except for the active ingredient. Both the placebo and treatment may contain inactive ingredients that produce side effects. Without a placebo group, these effects might be attributed to the treatment.
• Positive control group : A positive control group has conditions that guarantee a positive test result. The positive control group demonstrates an experiment is capable of producing a positive result. Positive controls help researchers identify problems with an experiment.
• Negative control group : A negative control group consists of subjects that are not exposed to a treatment. For example, in an experiment looking at the effect of fertilizer on plant growth, the negative control group receives no fertilizer.
• Natural control group : A natural control group usually is a set of subjects who naturally differ from the experimental group. For example, if you compare the effects of a treatment on women who have had children, the natural control group includes women who have not had children. Non-smokers are a natural control group in comparison to smokers.
• Randomized control group : The subjects in a randomized control group are randomly selected from a larger pool of subjects. Often, subjects are randomly assigned to either the control or experimental group. Randomization reduces bias in an experiment. There are different methods of randomly assigning test subjects.

Control Group Examples

Here are some examples of different control groups in action:

Negative Control and Placebo Group

For example, consider a study of a new cancer drug. The experimental group receives the drug. The placebo group receives a placebo, which contains the same ingredients as the drug formulation, minus the active ingredient. The negative control group receives no treatment. The reason for including the negative group is because the placebo group experiences some level of placebo effect, which is a response to experiencing some form of false treatment.

Positive and Negative Controls

For example, consider an experiment looking at whether a new drug kills bacteria. The experimental group exposes bacterial cultures to the drug. If the group survives, the drug is ineffective. If the group dies, the drug is effective.

The positive control group has a culture of bacteria that carry a drug resistance gene. If the bacteria survive drug exposure (as intended), then it shows the growth medium and conditions allow bacterial growth. If the positive control group dies, it indicates a problem with the experimental conditions. A negative control group of bacteria lacking drug resistance should die. If the negative control group survives, something is wrong with the experimental conditions.

• Bailey, R. A. (2008).  Design of Comparative Experiments . Cambridge University Press. ISBN 978-0-521-68357-9.
• Chaplin, S. (2006). “The placebo response: an important part of treatment”.  Prescriber . 17 (5): 16–22. doi: 10.1002/psb.344
• Hinkelmann, Klaus; Kempthorne, Oscar (2008).  Design and Analysis of Experiments, Volume I: Introduction to Experimental Design  (2nd ed.). Wiley. ISBN 978-0-471-72756-9.
• Pithon, M.M. (2013). “Importance of the control group in scientific research.” Dental Press J Orthod . 18 (6):13-14. doi: 10.1590/s2176-94512013000600003
• Stigler, Stephen M. (1992). “A Historical View of Statistical Concepts in Psychology and Educational Research”. American Journal of Education . 101 (1): 60–70. doi: 10.1086/444032

Related Posts

• Skip to secondary menu
• Skip to main content
• Skip to primary sidebar

Statistics By Jim

Making statistics intuitive

Control Group in an Experiment

By Jim Frost 3 Comments

A control group in an experiment does not receive the treatment. Instead, it serves as a comparison group for the treatments. Researchers compare the results of a treatment group to the control group to determine the effect size, also known as the treatment effect.

Imagine that a treatment group receives a vaccine and it has an infection rate of 10%. By itself, you don’t know if that’s an improvement. However, if you also have an unvaccinated control group with an infection rate of 20%, you know the vaccine improved the outcome by 10 percentage points.

By serving as a basis for comparison, the control group reveals the treatment’s effect.

Related post : Effect Sizes in Statistics

Using Control Groups in Experiments

Most experiments include a control group and at least one treatment group. In an ideal experiment, the subjects in all groups start with the same overall characteristics except that those in the treatment groups receive a treatment. When the groups are otherwise equivalent before treatment begins, you can attribute differences after the experiment to the treatments.

Randomized controlled trials (RCTs) assign subjects to the treatment and control groups randomly. This process helps ensure the groups are comparable when treatment begins. Consequently, treatment effects are the most likely cause for differences between groups at the end of the study. Statisticians consider RCTs to be the gold standard. To learn more about this process, read my post, Random Assignment in Experiments .

Observational studies either can’t use randomized groups or don’t use them because they’re too costly or problematic. In these studies, the characteristics of the control group might be different from the treatment groups at the start of the study, making it difficult to estimate the treatment effect accurately at the end. Case-Control studies are a specific type of observational study that uses a control group.

For these types of studies, analytical methods and design choices, such as regression analysis and matching, can help statistically mitigate confounding variables. Matching involves selecting participants with similar characteristics. For each participant in the treatment group, the researchers find a subject with comparable traits to include in the control group. To learn more about this type of study and matching, read my post, Observational Studies Explained .

Control groups are key way to increase the internal validity of an experiment. To learn more, read my post about internal and external validity .

Randomized versus non-randomized control groups are just several of the different types you can have. We’ll look at more kinds later!

Related posts : When to Use Regression Analysis

Example of a Control Group

Suppose we want to determine whether regular vitamin consumption affects the risk of dying. Our experiment has the following two experimental groups:

• Control group : Does not consume vitamin supplements
• Treatment group : Regularly consumes vitamin supplements.

In this experiment, we randomly assign subjects to the two groups. Because we use random assignment, the two groups start with similar characteristics, including healthy habits, physical attributes, medical conditions, and other factors affecting the outcome. The intentional introduction of vitamin supplements in the treatment group is the only systematic difference between the groups.

After the experiment is complete, we compare the death risk between the treatment and control groups. Because the groups started roughly equal, we can reasonably attribute differences in death risk at the end of the study to vitamin consumption. By having the control group as the basis of comparison, the effect of vitamin consumption becomes clear!

Types of Control Groups

Researchers can use different types of control groups in their experiments. Earlier, you learned about the random versus non-random kinds, but there are other variations. You can use various types depending on your research goals, constraints, and ethical issues, among other things.

Negative Control Group

The group introduces a condition that the researchers expect won’t have an effect. This group typically receives no treatment. These experiments compare the effectiveness of the experimental treatment to no treatment. For example, in a vaccine study, a negative control group does not get the vaccine.

Positive Control Group

Positive control groups typically receive a standard treatment that science has already proven effective. These groups serve as a benchmark for the performance of a conventional treatment. In this vein, experiments with positive control groups compare the effectiveness of a new treatment to a standard one.

For example, an old blood pressure medicine can be the treatment in a positive control group, while the treatment group receives the new, experimental blood pressure medicine. The researchers want to determine whether the new treatment is better than the previous treatment.

In these studies, subjects can still take the standard medication for their condition, a potentially critical ethics issue.

Placebo Control Group

Placebo control groups introduce a treatment lookalike that will not affect the outcome. Standard examples of placebos are sugar pills and saline solution injections instead of genuine medicine. The key is that the placebo looks like the actual treatment. Researchers use this approach when the recipients’ belief that they’re receiving the treatment might influence their outcomes. By using placebos, the experiment controls for these psychological benefits. The researchers want to determine whether the treatment performs better than the placebo effect.

Learn more about the Placebo Effect .

Blinded Control Groups

If the subject’s awareness of their group assignment might affect their outcomes, the researchers can use a blinded experimental design that does not tell participants their group membership. Typically, blinded control groups will receive placebos, as described above. In a double-blinded control group, both subjects and researchers don’t know group assignments.

Waitlist Control Group

When there is a waitlist to receive a new treatment, those on the waitlist can serve as a control group until they receive treatment. This type of design avoids ethical concerns about withholding a better treatment until the study finishes. This design can be a variation of a positive control group because the subjects might be using conventional medicines while on the waitlist.

Historical Control Group

When historical data for a comparison group exists, it can serve as a control group for an experiment. The group doesn’t exist in the study, but the researchers compare the treatment group to the existing data. For example, the researchers might have infection rate data for unvaccinated individuals to compare to the infection rate among the vaccinated participants in their study. This approach allows everyone in the experiment to receive the new treatment. However, differences in place, time, and other circumstances can reduce the value of these comparisons. In other words, other factors might account for the apparent effects.

Share this:

Reader Interactions

December 19, 2021 at 9:17 am

Thank you very much Jim for your quick and comprehensive feedback. Extremely helpful!! Regards, Arthur

December 17, 2021 at 4:46 pm

Thank you very much Jim, very interesting article.

Can I select a control group at the end of intervention/experiment? Currently I am managing a project in rural Cambodia in five villages, however I did not select any comparison/control site at the beginning. Since I know there are other villages which have not been exposed to any type of intervention, can i select them as a control site during my end-line data collection or it will not be a legitimate control? Thank you very much, Arthur

December 18, 2021 at 1:51 am

You might be able to use that approach, but it’s not ideal. The ideal is to have control groups defined at the beginning of the study. You can use the untreated villages as a type of historical control groups that I talk about in this article. Or, if they’re awaiting to receive the intervention, it might be akin to a waitlist control group.

If you go that route, you’ll need to consider whether there was some systematic reason why these villages have not received any intervention. For example, are the villages in question more remote? And, if there is a systematic reason, would that affect your outcome variable? More generally, are they systematically different? How well do the untreated villages represent your target population?

If you had selected control villages at the beginning, you’d have been better able to ensure there weren’t any systematic differences between the villages receiving interventions and those that didn’t.

If the villages that didn’t receive any interventions are systematically different, you’ll need to incorporate that into your interpretation of the results. Are they different in ways that affect the outcomes you’re measuring? Can those differences account for the difference in outcomes between the treated and untreated villages? Hopefully, you’d be able to measure those differences between untreated/treated villages.

So, yes, you can use that approach. It’s not perfect and there will potentially be more things for you to consider and factor into your conclusions. Despite these drawbacks, it’s possible that using a pseudo control group like that is better than not doing that because at least you can make comparisons to something. Otherwise, you won’t know whether the outcomes in the intervention villages represent an improvement! Just be aware of the extra considerations!

Best of luck with your research!

Comments and Questions Cancel reply

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Best Family Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Sweepstakes
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

What Is a Control Group?

Control Groups vs. Experimental Groups in Psychology Research

Doug Corrance/The Image Bank/Getty Images

Control Group vs. Experimental Group

Types of control groups.

In simple terms, the control group comprises participants who do not receive the experimental treatment. When conducting an experiment, these people are randomly assigned to this group. They also closely resemble the participants who are in the experimental group or the individuals who receive the treatment.

Experimenters utilize variables to make comparisons between an experimental group and a control group. A variable is something that researchers can manipulate, measure, and control in an experiment. The independent variable is the aspect of the experiment that the researchers manipulate (or the treatment). The dependent variable is what the researchers measure to see if the independent variable had an effect.

While they do not receive the treatment, the control group does play a vital role in the research process. Experimenters compare the experimental group to the control group to determine if the treatment had an effect.

By serving as a comparison group, researchers can isolate the independent variable and look at the impact it had.

The simplest way to determine the difference between a control group and an experimental group is to determine which group receives the treatment and which does not. To ensure that the results can then be compared accurately, the two groups should be otherwise identical.

Not exposed to the treatment (the independent variable)

Used to provide a baseline to compare results against

May receive a placebo treatment

Exposed to the treatment

Used to measure the effects of the independent variable

Identical to the control group aside from their exposure to the treatment

Why a Control Group Is Important

While the control group does not receive treatment, it does play a critical role in the experimental process. This group serves as a benchmark, allowing researchers to compare the experimental group to the control group to see what sort of impact changes to the independent variable produced.  

Because participants have been randomly assigned to either the control group or the experimental group, it can be assumed that the groups are comparable.

Any differences between the two groups are, therefore, the result of the manipulations of the independent variable. The experimenters carry out the exact same procedures with both groups with the exception of the manipulation of the independent variable in the experimental group.

There are a number of different types of control groups that might be utilized in psychology research. Some of these include:

• Positive control groups : In this case, researchers already know that a treatment is effective but want to learn more about the impact of variations of the treatment. In this case, the control group receives the treatment that is known to work, while the experimental group receives the variation so that researchers can learn more about how it performs and compares to the control.
• Negative control group : In this type of control group, the participants are not given a treatment. The experimental group can then be compared to the group that did not experience any change or results.
• Placebo control group : This type of control group receives a placebo treatment that they believe will have an effect. This control group allows researchers to examine the impact of the placebo effect and how the experimental treatment compared to the placebo treatment.
• Randomized control group : This type of control group involves using random selection to help ensure that the participants in the control group accurately reflect the demographics of the larger population.
• Natural control group : This type of control group is naturally selected, often by situational factors. For example, researchers might compare people who have experienced trauma due to war to people who have not experienced war. The people who have not experienced war-related trauma would be the control group.

Examples of Control Groups

Control groups can be used in a variety of situations. For example, imagine a study in which researchers example how distractions during an exam influence test results. The control group would take an exam in a setting with no distractions, while the experimental groups would be exposed to different distractions. The results of the exam would then be compared to see the effects that distractions had on test scores.

Experiments that look at the effects of medications on certain conditions are also examples of how a control group can be used in research. For example, researchers looking at the effectiveness of a new antidepressant might use a control group that receives a placebo and an experimental group that receives the new medication. At the end of the study, researchers would compare measures of depression for both groups to determine what impact the new medication had.

After the experiment is complete, researchers can then look at the test results and start making comparisons between the control group and the experimental group.

Uses for Control Groups

Researchers utilize control groups to conduct research in a range of different fields. Some common uses include:

• Psychology : Researchers utilize control groups to learn more about mental health, behaviors, and treatments.
• Medicine : Control groups can be used to learn more about certain health conditions, assess how well medications work to treat these conditions, and assess potential side effects that may result.
• Education : Educational researchers utilize control groups to learn more about how different curriculums, programs, or instructional methods impact student outcomes.
• Marketing : Researchers utilize control groups to learn more about how consumers respond to advertising and marketing efforts.

Malay S, Chung KC. The choice of controls for providing validity and evidence in clinical research . Plast Reconstr Surg. 2012 Oct;130(4):959-965. doi:10.1097/PRS.0b013e318262f4c8

National Cancer Institute. Control group.

Pithon MM. Importance of the control group in scientific research . Dental Press J Orthod. 2013;18(6):13-14. doi:10.1590/s2176-94512013000600003

Karlsson P, Bergmark A. Compared with what? An analysis of control-group types in Cochrane and Campbell reviews of psychosocial treatment efficacy with substance use disorders . Addiction . 2015;110(3):420-8. doi:10.1111/add.12799

Myers A, Hansen C. Experimental Psychology . Belmont, CA: Cengage Learning; 2012.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Control Group vs Experimental Group

Julia Simkus

Editor at Simply Psychology

BA (Hons) Psychology, Princeton University

Julia Simkus is a graduate of Princeton University with a Bachelor of Arts in Psychology. She is currently studying for a Master's Degree in Counseling for Mental Health and Wellness in September 2023. Julia's research has been published in peer reviewed journals.

Learn about our Editorial Process

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

In a controlled experiment , scientists compare a control group, and an experimental group is identical in all respects except for one difference – experimental manipulation.

Differences

Unlike the experimental group, the control group is not exposed to the independent variable under investigation. So, it provides a baseline against which any changes in the experimental group can be compared.

Since experimental manipulation is the only difference between the experimental and control groups, we can be sure that any differences between the two are due to experimental manipulation rather than chance.

Almost all experimental studies are designed to include a control group and one or more experimental groups. In most cases, participants are randomly assigned to either a control or experimental group.

Because participants are randomly assigned to either group, we can assume that the groups are identical except for manipulating the independent variable in the experimental group.

It is important that every aspect of the experimental environment is the same and that the experimenters carry out the exact same procedures with both groups so researchers can confidently conclude that any differences between groups are actually due to the difference in treatments.

Control Group

A control group consists of participants who do not receive any experimental treatment. The control participants serve as a comparison group.

The control group is matched as closely as possible to the experimental group, including age, gender, social class, ethnicity, etc.

The difference between the control and experimental groups is that the control group is not exposed to the independent variable , which is thought to be the cause of the behavior being investigated.

Researchers will compare the individuals in the control group to those in the experimental group to isolate the independent variable and examine its impact.

The control group is important because it serves as a baseline, enabling researchers to see what impact changes to the independent variable produce and strengthening researchers’ ability to draw conclusions from a study.

Without the presence of a control group, a researcher cannot determine whether a particular treatment truly has an effect on an experimental group.

Control groups are critical to the scientific method as they help ensure the internal validity of a study.

Assume you want to test a new medication for ADHD . One group would receive the new medication, and the other group would receive a pill that looked exactly the same as the one that the others received, but it would be a placebo. The group that takes the placebo would be the control group.

Types of Control Groups

Positive control group.

• A positive control group is an experimental control that will produce a known response or the desired effect.
• A positive control is used to ensure a test’s success and confirm an experiment’s validity.
• For example, when testing for a new medication, an already commercially available medication could serve as the positive control.

Negative Control Group

• A negative control group is an experimental control that does not result in the desired outcome of the experiment.
• A negative control is used to ensure that there is no response to the treatment and help identify the influence of external factors on the test.
• An example of a negative control would be using a placebo when testing for a new medication.

Experimental Group

An experimental group consists of participants exposed to a particular manipulation of the independent variable. These are the participants who receive the treatment of interest.

Researchers will compare the responses of the experimental group to those of a control group to see if the independent variable impacted the participants.

An experiment must have at least one control group and one experimental group; however, a single experiment can include multiple experimental groups, which are all compared against the control group.

Having multiple experimental groups enables researchers to vary different levels of an experimental variable and compare the effects of these changes to the control group and among each other.

Assume you want to study to determine if listening to different types of music can help with focus while studying.

You randomly assign participants to one of three groups: one group that listens to music with lyrics, one group that listens to music without lyrics, and another group that listens to no music.

The group of participants listening to no music while studying is the control group, and the groups listening to music, whether with or without lyrics, are the two experimental groups.

Frequently Asked Questions

1. what is the difference between the control group and the experimental group in an experimental study.

Put simply; an experimental group is a group that receives the variable, or treatment, that the researchers are testing, whereas the control group does not. These two groups should be identical in all other aspects.

2. What is the purpose of a control group in an experiment

A control group is essential in experimental research because it:

Provides a baseline against which the effects of the manipulated variable (the independent variable) can be measured.

Helps to ensure that any changes observed in the experimental group are indeed due to the manipulation of the independent variable and not due to other extraneous or confounding factors.

Helps to account for the placebo effect, where participants’ beliefs about the treatment can influence their behavior or responses.

In essence, it increases the internal validity of the results and the confidence we can have in the conclusions.

3. Do experimental studies always need a control group?

Not all experiments require a control group, but a true “controlled experiment” does require at least one control group. For example, experiments that use a within-subjects design do not have a control group.

In  within-subjects designs , all participants experience every condition and are tested before and after being exposed to treatment.

These experimental designs tend to have weaker internal validity as it is more difficult for a researcher to be confident that the outcome was caused by the experimental treatment and not by a confounding variable.

4. Can a study include more than one control group?

Yes, studies can include multiple control groups. For example, if several distinct groups of subjects do not receive the treatment, these would be the control groups.

5. How is the control group treated differently from the experimental groups?

The control group and the experimental group(s) are treated identically except for one key difference: exposure to the independent variable, which is the factor being tested. The experimental group is subjected to the independent variable, whereas the control group is not.

This distinction allows researchers to measure the effect of the independent variable on the experimental group by comparing it to the control group, which serves as a baseline or standard.

Bailey, R. A. (2008). Design of Comparative Experiments. Cambridge University Press. ISBN 978-0-521-68357-9.

Hinkelmann, Klaus; Kempthorne, Oscar (2008). Design and Analysis of Experiments, Volume I: Introduction to Experimental Design (2nd ed.). Wiley. ISBN 978-0-471-72756-9.

Understanding Control Groups for Research

Introduction

What are control groups in research, examples of control groups in research, control group vs. experimental group, types of control groups, control groups in non-experimental research.

A control group is typically thought of as the baseline in an experiment. In an experiment, clinical trial, or other sort of controlled study, there are at least two groups whose results are compared against each other.

The experimental group receives some sort of treatment, and their results are compared against those of the control group, which is not given the treatment. This is important to determine whether there is an identifiable causal relationship between the treatment and the resulting effects.

As intuitive as this may sound, there is an entire methodology that is useful to understanding the role of the control group in experimental research and as part of a broader concept in research. This article will examine the particulars of that methodology so you can design your research more rigorously .

Suppose that a friend or colleague of yours has a headache. You give them some over-the-counter medicine to relieve some of the pain. Shortly after they take the medicine, the pain is gone and they feel better. In casual settings, we can assume that it must be the medicine that was the cause of their headache going away.

In scientific research, however, we don't really know if the medicine made a difference or if the headache would have gone away on its own. Maybe in the time it took for the headache to go away, they ate or drank something that might have had an effect. Perhaps they had a quick nap that helped relieve the tension from the headache. Without rigorously exploring this phenomenon , any number of confounding factors exist that can make us question the actual efficacy of any particular treatment.

Experimental research relies on observing differences between the two groups by "controlling" the independent variable , or in the case of our example above, the medicine that is given or not given depending on the group. The dependent variable in this case is the change in how the person suffering the headache feels, and the difference between taking and not taking the medicine is evidence (or lack thereof) that the treatment is effective.

The catch is that, between the control group and other groups (typically called experimental groups), it's important to ensure that all other factors are the same or at least as similar as possible. Things such as age, fitness level, and even occupation can affect the likelihood someone has a headache and whether a certain medication is effective.

Faced with this dynamic, researchers try to make sure that participants in their control group and experimental group are as similar as possible to each other, with the only difference being the treatment they receive.

Experimental research is often associated with scientists in lab coats holding beakers containing liquids with funny colors. Clinical trials that deal with medical treatments rely primarily, if not exclusively, on experimental research designs involving comparisons between control and experimental groups.

However, many studies in the social sciences also employ some sort of experimental design which calls for the use of control groups. This type of research is useful when researchers are trying to confirm or challenge an existing notion or measure the difference in effects.

Workplace efficiency research

How might a company know if an employee training program is effective? They may decide to pilot the program to a small group of their employees before they implement the training to their entire workforce.

If they adopt an experimental design, they could compare results between an experimental group of workers who participate in the training program against a control group who continues as per usual without any additional training.

Qualitative data analysis starts with ATLAS.ti

Turn data into rich insights with our powerful data analysis software. Get started with a free trial.

Mental health research

Music certainly has profound effects on psychology, but what kind of music would be most effective for concentration? Here, a researcher might be interested in having participants in a control group perform a series of tasks in an environment with no background music, and participants in multiple experimental groups perform those same tasks with background music of different genres. The subsequent analysis could determine how well people perform with classical music, jazz music, or no music at all in the background.

Educational research

Suppose that you want to improve reading ability among elementary school students, and there is research on a particular teaching method that is associated with facilitating reading comprehension. How do you measure the effects of that teaching method?

A study could be conducted on two groups of otherwise equally proficient students to measure the difference in test scores. The teacher delivers the same instruction to the control group as they have to previous students, but they teach the experimental group using the new technique. A reading test after a certain amount of instruction could determine the extent of effectiveness of the new teaching method.

As you can see from the three examples above, experimental groups are the counterbalance to control groups. A control group offers an essential point of comparison. For an experimental study to be considered credible, it must establish a baseline against which novel research is conducted.

Researchers can determine the makeup of their experimental and control groups from their literature review . Remember that the objective of a review is to establish what is known about the object of inquiry and what is not known. Where experimental groups explore the unknown aspects of scientific knowledge, a control group is a sort of simulation of what would happen if the treatment or intervention was not administered. As a result, it will benefit researchers to have a foundational knowledge of the existing research to create a credible control group against which experimental results are compared, especially in terms of remaining sensitive to relevant participant characteristics that could confound the effects of your treatment or intervention so that you can appropriately distribute participants between the experimental and control groups.

There are multiple control groups to consider depending on the study you are looking to conduct. All of them are variations of the basic control group used to establish a baseline for experimental conditions.

No-treatment control group

This kind of control group is common when trying to establish the effects of an experimental treatment against the absence of treatment. This is arguably the most straightforward approach to an experimental design as it aims to directly demonstrate how a certain change in conditions produces an effect.

Placebo control group

In this case, the control group receives some sort of treatment under the exact same procedures as those in the experimental group. The only difference in this case is that the treatment in the placebo control group has already been judged to be ineffective, except that the research participants don't know that it is ineffective.

Placebo control groups (or negative control groups) are useful for allowing researchers to account for any psychological or affective factors that might impact the outcomes. The negative control group exists to explicitly eliminate factors other than changes in the independent variable conditions as causes of the effects experienced in the experimental group.

Positive control group

Contrasted with a no-treatment control group, a positive control group employs a treatment against which the treatment in the experimental group is compared. However, unlike in a placebo group, participants in a positive control group receive treatment that is known to have an effect.

If we were to use our first example of headache medicine, a researcher could compare results between medication that is commonly known as effective against the newer medication that the researcher thinks is more effective. Positive control groups are useful for validating experimental results when compared against familiar results.

Historical control group

Rather than study participants in control group conditions, researchers may employ existing data to create historical control groups. This form of control group is useful for examining changing conditions over time, particularly when incorporating past conditions that can't be replicated in the analysis.

Qualitative research more often relies on non-experimental research such as observations and interviews to examine phenomena in their natural environments. This sort of research is more suited for inductive and exploratory inquiries, not confirmatory studies meant to test or measure a phenomenon.

That said, the broader concept of a control group is still present in observational and interview research in the form of a comparison group. Comparison groups are used in qualitative research designs to show differences between phenomena, with the exception being that there is no baseline against which data is analyzed.

Comparison groups are useful when an experimental environment cannot produce results that would be applicable to real-world conditions. Research inquiries examining the social world face challenges of having too many variables to control, making observations and interviews across comparable groups more appropriate for data collection than clinical or sterile environments.

Analyze data and generate rich results with ATLAS.ti

Try out a free trial of ATLAS.ti to see how you can make the most of your qualitative data.

Control Group

• Reference work entry
• First Online: 01 January 2020
• Cite this reference work entry

• Sven Hilbert 3 , 4 , 5  

494 Accesses

A control group is one of multiple groups in an experimental treatment study, used as a baseline for the estimation of the effect of interest in the other groups.

Introduction

Experimental treatment studies are designed to estimate the effect of a particular treatment on one or more variables. Typically, the variables of interest are observed before and after treatment to detect changes that occurred in between. The two observations of the variables are called pretest and posttest to indicate their temporal position before and after the treatment. However, any differences between pre- and posttest need not be caused by the treatment. Therefore, experimental treatment studies use at least two groups: the experimental group receives the treatment while the control group does not. The effect of the treatment can be estimated by comparing the change observed in the treatment group with the change observed in the control group.

Treatment Groups as Independent Variables in an...

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Durable hardcover edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Author information

Authors and affiliations.

Department of Psychology, Psychological Methods and Assessment, Münich, Germany

Sven Hilbert

Faculty of Psychology, Educational Science, and Sport Science, University of Regensburg, Regensburg, Germany

Psychological Methods and Assessment, LMU Munich, Munich, Germany

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Sven Hilbert .

Editor information

Editors and affiliations.

Oakland University, Rochester, MI, USA

Virgil Zeigler-Hill

Todd K. Shackelford

Section Editor information

Humboldt University, Germany, Berlin, Germany

Matthias Ziegler

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Switzerland AG

About this entry

Cite this entry.

Hilbert, S. (2020). Control Group. In: Zeigler-Hill, V., Shackelford, T.K. (eds) Encyclopedia of Personality and Individual Differences. Springer, Cham. https://doi.org/10.1007/978-3-319-24612-3_1290

Download citation

DOI : https://doi.org/10.1007/978-3-319-24612-3_1290

Published : 22 April 2020

Publisher Name : Springer, Cham

Print ISBN : 978-3-319-24610-9

Online ISBN : 978-3-319-24612-3

eBook Packages : Behavioral Science and Psychology Reference Module Humanities and Social Sciences Reference Module Business, Economics and Social Sciences

Share this entry

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• COVID-19 Tracker
• Biochemistry
• Anatomy & Physiology
• Microbiology
• Neuroscience
• Animal Kingdom
• NGSS High School
• Latest News
• Editors’ Picks
• Weekly Digest
• Quotes about Biology

Control Group

Reviewed by: BD Editors

Control Group Definition

In scientific experiments, the control group is the group of subject that receive no treatment or a standardized treatment. Without the control group, there would be nothing to compare the treatment group to. When statistics refer to something being “X times more likely to happen” they are referring to the difference in the measurement between the treatment and control group. The control group provides a baseline in the experiment. The variable that is being studied in the experiment is not changed or is limited to zero in the control group. This insures that the effects of the variable are being studied. Most experiments try to add the variable back in increments to different treatment groups, to really begin to discern the effects of the variable in the system.

Ideally, the control group is subject to the same exact conditions as the treatment groups. This insures that only the effects produced by the variable are being measured. In a study of plants, for instance, all the plants would ideally be in the same room, with the same light and air conditions. In biological studies, it is also important that the organisms in the treatment and control groups come from the same population. Ideally, the organisms would all be clones of each other, to reduce genetic differences. This is the case in many artificially selected lab species, which have been selected to be very similar to each other. This ensures that the results obtained are valid.

Examples of Control Group

Testing enzyme strength.

In a simple biological lab experiment, students can test the effects of different concentrations of enzyme. The student can prepare a stock solution of enzyme by spitting into a beaker. Human spit contains the enzyme amylase, which breaks down starches. The concentration of enzyme can be varied by dividing the stock solution and adding in various amounts of water. Once various solutions of different strength enzyme have been produced, the experiment can begin.

In several treatment beakers are placed the following ingredients: starch, iodine, and the different solutions of enzyme. In the control group, a beaker is filled with starch and iodine, but no enzyme. When iodine is in the presence of starch, it turns black. As the enzyme depletes the starch in each beaker, the solution clears up and is a lighter yellow or brown color. In this way, the student can tell how long the enzymes in each beaker take to completely process the same amount of substrate. The control group is important because it will tell the student if the starch breaks down without the enzyme, which it will, given enough time.

Testing Drugs and the Placebo Effect

When drugs are tested on humans, control groups are also used. Although control groups were just considered good science, they have found an interesting phenomena in drug trials. Oftentimes, control groups in drug trials consist of people who also have the disease or ailment, but who don’t receive the medicine being tested. Instead, to keep the control group the same as the treatment groups, the patients in the control group are also given a pill. This is a sugar pill usually and contains no medicine. This practice of having a control group is important for drug trial, because it validates the results obtained. However, the control groups have also demonstrated an interesting effect, known as the placebo effect

In some drug trials, where the control group is given a fake medicine, patients start to see results. Scientists call this the placebo effect, and as of yet it is mostly unexplained. Some scientists have suggested that people get better simply because they believed they were going to get better, but this theory remains untested. Other scientists claim that unknown variables in the experiment caused the patients to get better. This theory remains unproven, as well.

Related Biology Terms

• Treatment Group – The group that receives the variable, or altered amounts of the variable.
• Variable – The part of the experiment being studied which is changed, or altered, throughout the experiment.
• Scientific Method – The steps scientist follow to ensure their results are valid and reproducible.
• Placebo Effect – A phenomenon when patients in the control group experience the same effects as those in the treatment group, though no treatment was given.

Cite This Article

Subscribe to our newsletter, privacy policy, terms of service, scholarship, latest posts, white blood cell, t cell immunity, satellite cells, embryonic stem cells, popular topics, digestive system, mitochondria, pituitary gland, water cycle, natural selection.

If you're seeing this message, it means we're having trouble loading external resources on our website.

If you're behind a web filter, please make sure that the domains *.kastatic.org and *.kasandbox.org are unblocked.

To log in and use all the features of Khan Academy, please enable JavaScript in your browser.

Biology archive

Course: biology archive   >   unit 1.

• The scientific method

Controlled experiments

• The scientific method and experimental design

Introduction

How are hypotheses tested.

• One pot of seeds gets watered every afternoon.
• The other pot of seeds doesn't get any water at all.

Control and experimental groups

Independent and dependent variables, independent variables, dependent variables, variability and repetition, controlled experiment case study: co 2 ‍   and coral bleaching.

• What your control and experimental groups would be
• What your independent and dependent variables would be
• What results you would predict in each group

Experimental setup

• Some corals were grown in tanks of normal seawater, which is not very acidic ( pH ‍   around 8.2 ‍   ). The corals in these tanks served as the control group .
• Other corals were grown in tanks of seawater that were more acidic than usual due to addition of CO 2 ‍   . One set of tanks was medium-acidity ( pH ‍   about 7.9 ‍   ), while another set was high-acidity ( pH ‍   about 7.65 ‍   ). Both the medium-acidity and high-acidity groups were experimental groups .
• In this experiment, the independent variable was the acidity ( pH ‍   ) of the seawater. The dependent variable was the degree of bleaching of the corals.
• The researchers used a large sample size and repeated their experiment. Each tank held 5 ‍   fragments of coral, and there were 5 ‍   identical tanks for each group (control, medium-acidity, and high-acidity). Note: None of these tanks was "acidic" on an absolute scale. That is, the pH ‍   values were all above the neutral pH ‍   of 7.0 ‍   . However, the two groups of experimental tanks were moderately and highly acidic to the corals , that is, relative to their natural habitat of plain seawater.

Analyzing the results

Non-experimental hypothesis tests, case study: coral bleaching and temperature, attribution:, works cited:.

• Hoegh-Guldberg, O. (1999). Climate change, coral bleaching, and the future of the world's coral reefs. Mar. Freshwater Res. , 50 , 839-866. Retrieved from www.reef.edu.au/climate/Hoegh-Guldberg%201999.pdf.
• Anthony, K. R. N., Kline, D. I., Diaz-Pulido, G., Dove, S., and Hoegh-Guldberg, O. (2008). Ocean acidification causes bleaching and productivity loss in coral reef builders. PNAS , 105 (45), 17442-17446. http://dx.doi.org/10.1073/pnas.0804478105 .
• University of California Museum of Paleontology. (2016). Misconceptions about science. In Understanding science . Retrieved from http://undsci.berkeley.edu/teaching/misconceptions.php .
• Hoegh-Guldberg, O. and Smith, G. J. (1989). The effect of sudden changes in temperature, light and salinity on the density and export of zooxanthellae from the reef corals Stylophora pistillata (Esper, 1797) and Seriatopora hystrix (Dana, 1846). J. Exp. Mar. Biol. Ecol. , 129 , 279-303. Retrieved from http://www.reef.edu.au/ohg/res-pic/HG%20papers/HG%20and%20Smith%201989%20BLEACH.pdf .

Additional references:

Want to join the conversation.

• Upvote Button navigates to signup page
• Downvote Button navigates to signup page
• Flag Button navigates to signup page

✂️ The Future of Marketing Is Personal: Personalize Experiences at Scale with Ninetailed AI Platform Ninetailed AI →

Control Group

What is a control group in an experiment.

A control group is a set of subjects in an experiment who are not exposed to the independent variable. The purpose of a control group is to serve as a baseline for comparison. By having a group that is not exposed to the treatment, researchers can compare the results of the experimental group and determine whether the independent variable had an impact.

In some cases, there may be more than one control group. This is often done when there are multiple treatments or when researchers want to compare different groups of subjects. Having multiple control groups allows researchers to isolate the effect of each treatment and better understand how each one works.

Control groups are an important part of any experiment, as they help ensure that the results are accurate and reliable. Without a control group, it would be difficult to determine whether the results of an experiment are due to the independent variable or other factors.

When designing an experiment, it is important to carefully consider what kind of control group you will need. There are many different ways to set up a control group, and the best approach will depend on the specific goals of your research.

Control Group vs. Experimental Group

A control group is a group in an experiment that does not receive the experimental treatment. The purpose of a control group is to provide a baseline against which to compare the experimental group results.

An experimental group is a group in an experiment that receives the experimental treatment. The purpose of an experimental group is to test whether or not the experimental treatment has an effect.

The differences between control and experimental groups are important to consider when designing an experiment. The most important difference is that the control group provides a comparison for the results of the experimental group. This comparison is essential in order to determine whether or not the experimental treatment had an effect. Without a control group, it would be impossible to know if the results of the experiment are due to the treatment or not.

Another important difference between a control group and an experimental group is that the experimental group is the only group that receives the experimental treatment. This is necessary in order to ensure that any results seen in the experimental group can be attributed to the treatment and not to other factors.

Control groups and experimental groups are both essential parts of experiments. Without a control group, it would be impossible to know if the results of an experiment are due to the treatment or not. Without an experimental group, it would be impossible to test whether or not a treatment has an effect.

What Is the Purpose of a Control Group

The purpose of a control group is to serve as a baseline for comparison. By having a group that is not exposed to the treatment, researchers can compare the results of the experimental group and determine whether the independent variable had an impact.

Why Is a Control Group Important in an Experiment

A control group is an essential part of any experiment. It is a group of subjects who are not exposed to the independent variable being tested. The purpose of a control group is to provide a baseline against which the results from the treatment group can be compared.

Without a control group, it would be impossible to determine whether the results of an experiment are due to the treatment or some other factor. For example, imagine you are testing the effects of a new drug on patients with high blood pressure. If you did not have a control group, you would not know if the decrease in blood pressure was due to the drug or something else, such as the placebo effect.

A control group must be carefully designed to match the treatment group in all important respects, except for the one factor that is being tested. This ensures that any differences in the results can be attributed to the independent variable and not to other factors.

Get a weekly roundup of Ninetailed updates, curated posts, and helpful insights about the digital experience, MACH, composable, and more right into your inbox

Keep Reading on This Topic

In this blog post, we will explore nine of the most common personalization challenges and discuss how to overcome them.

In this post, we will discuss some of the best practices and tips for using website content personalization to delight your customers and enhance user experiences.

Control Group: Definition, Examples and Types

Design of Experiments > Control Group

What is a Control Group?

An experiment is split into two groups: the experimental group and the control group. The experimental group is given the experimental treatment and the control group is given either a standard treatment or nothing. For example, let’s say you wanted to know if Gatorade increased athletic performance. Your experimental group would be given the Gatorade and your control group would be given regular water.

The conditions must be exactly the same for all members in the experiment. The only difference between members must be the item or thing you are conducting the experiment to look at. Let’s say you wanted to know if a new fertilizer makes plants grow taller. You must ensure that the lighting, water supply, size of container and other important factors are held constant for every member in every group. The only thing that differs in this case is the type of fertilizer given to the plants.

Types of Control Groups in Medical Experiments

Control groups can be subdivided into the following types (see: FDA ):

• Placebo concurrent control : one group is given the treatment, the other a placebo (“sugar pill”).
• Dose-comparison concurrent control : two different doses are administered, a different one to each group.
• No treatment concurrent control : one group is given the treatment, the other group is given nothing.
• Active treatment concurrent control : one group is given the treatment, the other group is given an existing therapy that is known to be effective.
• Historical control: only one physical group exists experimentally (the experimental group). the control group is compiled from historical data.

Which type of control group you use depends largely on what type of patients you are administering a treatment too. In many cases, it would be unethical to withhold treatment from a control group or provide a placebo.

Next : The Placebo Effect.

Beyer, W. H. CRC Standard Mathematical Tables, 31st ed. Boca Raton, FL: CRC Press, pp. 536 and 571, 2002. Agresti A. (1990) Categorical Data Analysis. John Wiley and Sons, New York. Dodge, Y. (2008). The Concise Encyclopedia of Statistics . Springer. Gonick, L. (1993). The Cartoon Guide to Statistics . HarperPerennial.

The Difference Between Control Group and Experimental Group

• Chemical Laws
• Periodic Table
• Projects & Experiments
• Scientific Method
• Biochemistry
• Physical Chemistry
• Medical Chemistry
• Chemistry In Everyday Life
• Famous Chemists
• Activities for Kids
• Abbreviations & Acronyms
• Weather & Climate

In an experiment , data from an experimental group is compared with data from a control group. These two groups should be identical in every respect except one: the difference between a control group and an experimental group is that the independent variable is changed for the experimental group, but is held constant in the control group.

Key Takeaways: Control vs. Experimental Group

• The control group and experimental group are compared against each other in an experiment. The only difference between the two groups is that the independent variable is changed in the experimental group. The independent variable is "controlled", or held constant, in the control group.
• A single experiment may include multiple experimental groups, which may all be compared against the control group.
• The purpose of having a control is to rule out other factors which may influence the results of an experiment. Not all experiments include a control group, but those that do are called "controlled experiments."
• A placebo may also be used in an experiment. A placebo isn't a substitute for a control group because subjects exposed to a placebo may experience effects from the belief they are being tested; this itself is known as the placebo effect.

What Are Is an Experimental Group in Experiment Design?

An experimental group is a test sample or the group that receives an experimental procedure. This group is exposed to changes in the independent variable being tested. The values of the independent variable and the impact on the dependent variable are recorded. An experiment may include multiple experimental groups at one time.

A control group is a group separated from the rest of the experiment such that the independent variable being tested cannot influence the results. This isolates the independent variable's effects on the experiment and can help rule out alternative explanations of the experimental results.

While all experiments have an experimental group, not all experiments require a control group. Controls are extremely useful where the experimental conditions are complex and difficult to isolate. Experiments that use control groups are called controlled experiments .

A Simple Example of a Controlled Experiment

A simple example of a controlled experiment may be used to determine whether or not plants need to be watered to live. The control group would be plants that are not watered. The experimental group would consist of plants that receive water. A clever scientist would wonder whether too much watering might kill the plants and would set up several experimental groups, each receiving a different amount of water.

Sometimes setting up a controlled experiment can be confusing. For example, a scientist may wonder whether or not a species of bacteria needs oxygen in order to live. To test this, cultures of bacteria may be left in the air, while other cultures are placed in a sealed container of nitrogen (the most common component of air) or deoxygenated air (which likely contained extra carbon dioxide). Which container is the control? Which is the experimental group?

Control Groups and Placebos

The most common type of control group is one held at ordinary conditions so it doesn't experience a changing variable. For example, If you want to explore the effect of salt on plant growth, the control group would be a set of plants not exposed to salt, while the experimental group would receive the salt treatment. If you want to test whether the duration of light exposure affects fish reproduction, the control group would be exposed to a "normal" number of hours of light, while the duration would change for the experimental group.

Experiments involving human subjects can be much more complex. If you're testing whether a drug is effective or not, for example, members of a control group may expect they will not be unaffected. To prevent skewing the results, a placebo may be used. A placebo is a substance that doesn't contain an active therapeutic agent. If a control group takes a placebo, participants don't know whether they are being treated or not, so they have the same expectations as members of the experimental group.

However, there is also the placebo effect to consider. Here, the recipient of the placebo experiences an effect or improvement because she believes there should be an effect. Another concern with a placebo is that it's not always easy to formulate one that truly free of active ingredients. For example, if a sugar pill is given as a placebo, there's a chance the sugar will affect the outcome of the experiment.

Positive and Negative Controls

Positive and negative controls are two other types of control groups:

• Positive control groups are control groups in which the conditions guarantee a positive result. Positive control groups are effective to show the experiment is functioning as planned.
• Negative control groups are control groups in which conditions produce a negative outcome. Negative control groups help identify outside influences which may be present that were not unaccounted for, such as contaminants.
• Bailey, R. A. (2008). Design of Comparative Experiments . Cambridge University Press. ISBN 978-0-521-68357-9.
• Chaplin, S. (2006). "The placebo response: an important part of treatment". Prescriber : 16–22. doi: 10.1002/psb.344
• Hinkelmann, Klaus; Kempthorne, Oscar (2008). Design and Analysis of Experiments, Volume I: Introduction to Experimental Design (2nd ed.). Wiley. ISBN 978-0-471-72756-9.
• What is the Difference Between Molarity and Molality?
• The Difference Between Homogeneous and Heterogeneous Mixtures
• The Difference Between Intensive and Extensive Properties
• Examples of Polar and Nonpolar Molecules
• How to Draw a Lewis Structure
• Ionic vs. Covalent Bonds: How Are They Different?
• How to Calculate Density of a Gas
• What Is Alum and How Is It Used?
• The Visible Spectrum: Wavelengths and Colors
• Examples of Physical Changes
• Chemistry Glassware Types, Names and Uses
• Fun and Interesting Chemistry Facts
• Table of Electrical Resistivity and Conductivity
• Molarity Definition in Chemistry
• Chemical Properties of Matter
• Difference Between Independent and Dependent Variables

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• What Is a Controlled Experiment? | Definitions & Examples

What Is a Controlled Experiment? | Definitions & Examples

Published on April 19, 2021 by Pritha Bhandari . Revised on June 22, 2023.

In experiments , researchers manipulate independent variables to test their effects on dependent variables. In a controlled experiment , all variables other than the independent variable are controlled or held constant so they don’t influence the dependent variable.

Controlling variables can involve:

• holding variables at a constant or restricted level (e.g., keeping room temperature fixed).
• measuring variables to statistically control for them in your analyses.
• balancing variables across your experiment through randomization (e.g., using a random order of tasks).

Table of contents

Why does control matter in experiments, methods of control, problems with controlled experiments, other interesting articles, frequently asked questions about controlled experiments.

Control in experiments is critical for internal validity , which allows you to establish a cause-and-effect relationship between variables. Strong validity also helps you avoid research biases , particularly ones related to issues with generalizability (like sampling bias and selection bias .)

• Your independent variable is the color used in advertising.
• Your dependent variable is the price that participants are willing to pay for a standard fast food meal.

Extraneous variables are factors that you’re not interested in studying, but that can still influence the dependent variable. For strong internal validity, you need to remove their effects from your experiment.

• Design and description of the meal,
• Study environment (e.g., temperature or lighting),
• Participant’s frequency of buying fast food,
• Participant’s familiarity with the specific fast food brand,
• Participant’s socioeconomic status.

Prevent plagiarism. Run a free check.

You can control some variables by standardizing your data collection procedures. All participants should be tested in the same environment with identical materials. Only the independent variable (e.g., ad color) should be systematically changed between groups.

Other extraneous variables can be controlled through your sampling procedures . Ideally, you’ll select a sample that’s representative of your target population by using relevant inclusion and exclusion criteria (e.g., including participants from a specific income bracket, and not including participants with color blindness).

By measuring extraneous participant variables (e.g., age or gender) that may affect your experimental results, you can also include them in later analyses.

After gathering your participants, you’ll need to place them into groups to test different independent variable treatments. The types of groups and method of assigning participants to groups will help you implement control in your experiment.

Control groups

Controlled experiments require control groups . Control groups allow you to test a comparable treatment, no treatment, or a fake treatment (e.g., a placebo to control for a placebo effect ), and compare the outcome with your experimental treatment.

You can assess whether it’s your treatment specifically that caused the outcomes, or whether time or any other treatment might have resulted in the same effects.

To test the effect of colors in advertising, each participant is placed in one of two groups:

• A control group that’s presented with red advertisements for a fast food meal.
• An experimental group that’s presented with green advertisements for the same fast food meal.

Random assignment

To avoid systematic differences and selection bias between the participants in your control and treatment groups, you should use random assignment .

This helps ensure that any extraneous participant variables are evenly distributed, allowing for a valid comparison between groups .

Random assignment is a hallmark of a “true experiment”—it differentiates true experiments from quasi-experiments .

Masking (blinding)

Masking in experiments means hiding condition assignment from participants or researchers—or, in a double-blind study , from both. It’s often used in clinical studies that test new treatments or drugs and is critical for avoiding several types of research bias .

Sometimes, researchers may unintentionally encourage participants to behave in ways that support their hypotheses , leading to observer bias . In other cases, cues in the study environment may signal the goal of the experiment to participants and influence their responses. These are called demand characteristics . If participants behave a particular way due to awareness of being observed (called a Hawthorne effect ), your results could be invalidated.

Using masking means that participants don’t know whether they’re in the control group or the experimental group. This helps you control biases from participants or researchers that could influence your study results.

You use an online survey form to present the advertisements to participants, and you leave the room while each participant completes the survey on the computer so that you can’t tell which condition each participant was in.

Although controlled experiments are the strongest way to test causal relationships, they also involve some challenges.

Difficult to control all variables

Especially in research with human participants, it’s impossible to hold all extraneous variables constant, because every individual has different experiences that may influence their perception, attitudes, or behaviors.

But measuring or restricting extraneous variables allows you to limit their influence or statistically control for them in your study.

Risk of low external validity

Controlled experiments have disadvantages when it comes to external validity —the extent to which your results can be generalized to broad populations and settings.

The more controlled your experiment is, the less it resembles real world contexts. That makes it harder to apply your findings outside of a controlled setting.

There’s always a tradeoff between internal and external validity . It’s important to consider your research aims when deciding whether to prioritize control or generalizability in your experiment.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Student’s  t -distribution
• Normal distribution
• Null and Alternative Hypotheses
• Chi square tests
• Confidence interval
• Quartiles & Quantiles
• Cluster sampling
• Stratified sampling
• Data cleansing
• Reproducibility vs Replicability
• Peer review
• Prospective cohort study

Research bias

• Implicit bias
• Cognitive bias
• Placebo effect
• Hawthorne effect
• Hindsight bias
• Affect heuristic
• Social desirability bias

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

In a controlled experiment , all extraneous variables are held constant so that they can’t influence the results. Controlled experiments require:

• A control group that receives a standard treatment, a fake treatment, or no treatment.
• Random assignment of participants to ensure the groups are equivalent.

Depending on your study topic, there are various other methods of controlling variables .

An experimental group, also known as a treatment group, receives the treatment whose effect researchers wish to study, whereas a control group does not. They should be identical in all other ways.

Experimental design means planning a set of procedures to investigate a relationship between variables . To design a controlled experiment, you need:

• A testable hypothesis
• At least one independent variable that can be precisely manipulated
• At least one dependent variable that can be precisely measured

When designing the experiment, you decide:

• How you will manipulate the variable(s)
• How you will control for any potential confounding variables
• How many subjects or samples will be included in the study
• How subjects will be assigned to treatment levels

Experimental design is essential to the internal and external validity of your experiment.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Bhandari, P. (2023, June 22). What Is a Controlled Experiment? | Definitions & Examples. Scribbr. Retrieved July 30, 2024, from https://www.scribbr.com/methodology/controlled-experiment/

Is this article helpful?

Pritha Bhandari

Other students also liked, extraneous variables | examples, types & controls, guide to experimental design | overview, steps, & examples, how to write a lab report, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

In order to continue enjoying our site, we ask that you confirm your identity as a human. Thank you very much for your cooperation.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• Controlled Experiments | Methods & Examples of Control

Controlled Experiments | Methods & Examples of Control

Published on 19 April 2022 by Pritha Bhandari . Revised on 10 October 2022.

In experiments , researchers manipulate independent variables to test their effects on dependent variables. In a controlled experiment , all variables other than the independent variable are controlled or held constant so they don’t influence the dependent variable.

Controlling variables can involve:

• Holding variables at a constant or restricted level (e.g., keeping room temperature fixed)
• Measuring variables to statistically control for them in your analyses
• Balancing variables across your experiment through randomisation (e.g., using a random order of tasks)

Table of contents

Why does control matter in experiments, methods of control, problems with controlled experiments, frequently asked questions about controlled experiments.

Control in experiments is critical for internal validity , which allows you to establish a cause-and-effect relationship between variables.

• Your independent variable is the colour used in advertising.
• Your dependent variable is the price that participants are willing to pay for a standard fast food meal.

Extraneous variables are factors that you’re not interested in studying, but that can still influence the dependent variable. For strong internal validity, you need to remove their effects from your experiment.

• Design and description of the meal
• Study environment (e.g., temperature or lighting)
• Participant’s frequency of buying fast food
• Participant’s familiarity with the specific fast food brand
• Participant’s socioeconomic status

Prevent plagiarism, run a free check.

You can control some variables by standardising your data collection procedures. All participants should be tested in the same environment with identical materials. Only the independent variable (e.g., advert colour) should be systematically changed between groups.

Other extraneous variables can be controlled through your sampling procedures . Ideally, you’ll select a sample that’s representative of your target population by using relevant inclusion and exclusion criteria (e.g., including participants from a specific income bracket, and not including participants with colour blindness).

By measuring extraneous participant variables (e.g., age or gender) that may affect your experimental results, you can also include them in later analyses.

After gathering your participants, you’ll need to place them into groups to test different independent variable treatments. The types of groups and method of assigning participants to groups will help you implement control in your experiment.

Control groups

Controlled experiments require control groups . Control groups allow you to test a comparable treatment, no treatment, or a fake treatment, and compare the outcome with your experimental treatment.

You can assess whether it’s your treatment specifically that caused the outcomes, or whether time or any other treatment might have resulted in the same effects.

• A control group that’s presented with red advertisements for a fast food meal
• An experimental group that’s presented with green advertisements for the same fast food meal

Random assignment

To avoid systematic differences between the participants in your control and treatment groups, you should use random assignment .

This helps ensure that any extraneous participant variables are evenly distributed, allowing for a valid comparison between groups .

Random assignment is a hallmark of a ‘true experiment’ – it differentiates true experiments from quasi-experiments .

Masking (blinding)

Masking in experiments means hiding condition assignment from participants or researchers – or, in a double-blind study , from both. It’s often used in clinical studies that test new treatments or drugs.

Sometimes, researchers may unintentionally encourage participants to behave in ways that support their hypotheses. In other cases, cues in the study environment may signal the goal of the experiment to participants and influence their responses.

Using masking means that participants don’t know whether they’re in the control group or the experimental group. This helps you control biases from participants or researchers that could influence your study results.

Although controlled experiments are the strongest way to test causal relationships, they also involve some challenges.

Difficult to control all variables

Especially in research with human participants, it’s impossible to hold all extraneous variables constant, because every individual has different experiences that may influence their perception, attitudes, or behaviors.

But measuring or restricting extraneous variables allows you to limit their influence or statistically control for them in your study.

Risk of low external validity

Controlled experiments have disadvantages when it comes to external validity – the extent to which your results can be generalised to broad populations and settings.

The more controlled your experiment is, the less it resembles real world contexts. That makes it harder to apply your findings outside of a controlled setting.

There’s always a tradeoff between internal and external validity . It’s important to consider your research aims when deciding whether to prioritise control or generalisability in your experiment.

Experimental designs are a set of procedures that you plan in order to examine the relationship between variables that interest you.

To design a successful experiment, first identify:

• A testable hypothesis
• One or more independent variables that you will manipulate
• One or more dependent variables that you will measure

When designing the experiment, first decide:

• How your variable(s) will be manipulated
• How you will control for any potential confounding or lurking variables
• How many subjects you will include
• How you will assign treatments to your subjects

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bhandari, P. (2022, October 10). Controlled Experiments | Methods & Examples of Control. Scribbr. Retrieved 30 July 2024, from https://www.scribbr.co.uk/research-methods/controlled-experiments/

Is this article helpful?

Pritha Bhandari